QAZQA 105432 Ivan TL Black Instruction Manual
- June 15, 2024
- QAZQA
Table of Contents
QAZQA 105432 Ivan TL Black
Product Information
Specifications
- Model: Ivan TL Black 105432
- IP Rating: IP44
- Dimmable Levels: 3 (100%, 50%, 25%)
- Table Lamp
- LED Module: QL7001237
- Luminous Flux: 260lm/140lm/70lm (Module), 150lm/75lm/40lm (Lamp)
- Power Consumption: 3W (LED Module), 3W (Lamp)
- Power Supply: 5V, 1A
- Color Temperature: 2700K
- Color Rendering Index (CRI): 80
- Estimated Lifespan: 30000 hours
- ON/OFF Working Time (at 100% brightness): 6 hours
- Full Charge Time: 3.5 hours (via USB-C)
Frequently Asked Questions
- Q: What is the size of the lamp?
- The lamp has dimensions of 224mm (height) and 300mm (width).
- Q: What is the model number of the lamp?
- The model number of the lamp is 105432.
- Q: What is included in the LED module?
- The LED module included with the lamp is QL7001237.
- Q: How long does it take to fully charge the lamp?
- The lamp takes approximately 3.5 hours to fully charge via USB-C.
- Q: How long does the lamp work at 100% brightness?
- The lamp can work continuously for up to 6 hours at 100% brightness.
Product Usage Instructions
Charging
To charge the lamp, follow these steps:
- Connect the lamp to a power source using the provided USB-C cable.
- The indicator light will turn red, indicating that the lamp is charging.
- Once fully charged, the indicator light will turn green.
Dimming
The lamp offers three dimmable levels. To adjust the brightness, use the following steps:
- Tap the touch-sensitive area on the lamp base to turn it on.
- Tap the touch-sensitive area again to cycle through the dimming levels (100%, 50%, 25%).
- To turn off the lamp, tap the touch-sensitive area again.
Lamp Maintenance
To maintain the lamp’s performance and prolong its lifespan, please keep the following in mind:
- Avoid exposing the lamp to extreme temperatures or humidity.
- Clean the lamp with a soft, dry cloth. Do not use any abrasive cleaners or solvents.
- Ensure the lamp is disconnected from the power source before performing any maintenance.
Specifications
Table lamp
- incl.LED QL7001237
- 260lm/140lm/70lm Module
- 150lm/75lm/40lm Lamp
- 3W LED Module
- 3W Lamp
- 5V 1A
- 2700K
- CRI>80
- 30000h
- 15000 ON/OFF
- Working Time for 100% brightness: 6hrs
- Full charge time: 3.5hrs by USB-C
Installation And Dimension
Installation
Dimension
- This product contains a light source of energy efficiency class G
More Information
QR
EAN
- 8718881137358
Features
-
Replaceable (LED only) light source by a professional.
-
Replaceable control gear by a professional.
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before
installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distonce from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
- For indoor use only, where direct contact with water is impossible
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Class III: the fitting is low voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltage.
- The luminaire can be used in combination with a dimmer
- The luminoire con be dimmed by wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
- L: Live conductor
- Earth conductor
- N: Neutral conductor
Symbols
FittinQ B.V.
- Smaragdweg 52, 5527 LB Ha pert, The Netherlands
- www.qazqa.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>