QAZQA 96582 Cup Concrete Wall Lamp Light Instruction Manual

: June 15, 2024
: QAZQA

Table of Contents

QAZQA 96582 Cup Concrete Wall Lamp Light
Product Information
Specifications
Product Usage Instructions
**Power Supply
**Lamp Installation
**Dimensions
Safety Precautions
INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QAZQA 96582 Cup Concrete Wall Lamp Light

Product Information

Specifications

Power Supply: 220-240V~
Frequency: 50Hz
Maximum Lamp Base Size: 50mm G9
Maximum Wattage: 25W
Cup Model: WL Concrete 96582
IP Rating: IP20
Dimensions: 185mm x 146mm x 160mm

Product Usage Instructions

**Power Supply

**

The product requires a power supply of 220-240V~ and operates at a frequency of 50Hz.

**Lamp Installation

**

To install the lamp, follow these steps:

Ensure the power is switched off.
Select a lamp with a maximum base size of 50mm G9 and a maximum wattage of 25W.
Gently insert the lamp into the designated socket, ensuring a secure fit.
Once the lamp is properly installed, switch on the power supply.

Cup Model

The cup model for this product is WL Concrete 96582. Please refer to the product packaging or manual for further details on the cup model.

IP Rating

The product has an IP20 rating, which means it is protected against solid objects greater than 12.5mm in size and does not provide protection against water.

**Dimensions

**

The product has the following dimensions: 185mm (height) x 146mm (width) x 160mm (depth).

FAQ

Q: Where can I find more information about the product?
A: For more information about the product, you can visit the official website of FittinQ B.V. at www.qazqa.nl or FittinQ LTD at www.fittinq.com.
Q: What should I do if the lamp does not fit securely into the socket?
A: If the lamp does not fit securely into the socket, make sure you are using a lamp with a maximum base size of 50mm G9. If the issue persists, contact customer support for further assistance.

Safety Precautions

INSTALLATION

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference

The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting.
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
Take account of all available technical information.
Meaning of symbols:
This icon indicates the level of water-proof and dust-proof
Protection Class I: the fitting must be earthed
Protection Class Il: the fitting is doubled insulated and does not require earthing
Protection Class III: the fitting is low voltage
Minimum distance from lighted objects (meters)
The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
The armature is designed to work only with the indicated voltage. Different items require different working voltage.
The luminaire can be used in combination with a dimmer
The luminaire can be dimmed by wall switch
The reference light angle and light space of the luminaire
This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
Take note of the symbols when connecting wires:
L| Li ve co n duc tor
---|---
| Ea r t h