QAZQA 106072 Wandlamp Donker Sensor Instruction Manual
- June 15, 2024
- QAZQA
Table of Contents
QAZQA 106072 Wandlamp Donker Sensor
SAFETY PRECAUTIONS
Sensor
Type
| LUX control level
LUX| 30lux
Please study the instruction ma nu al and below information carefully before instal Ii ng or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols: This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
L | Live conductor |
---|---|
Earth conductor | |
N | Neutral conductor |
FittinQ B.V.
Smaragdweg 52, 5527 LB Haper!, The Netherlands
www.qazqa.nl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>