HORUSLY RTW-01 Towel Warmer Bucket Instruction Manual

June 15, 2024
HORUSLY

HORUSLY RTW-01 Towel Warmer Bucket

Specifications

  • Product Name : Luxury Towel Warmer
  • Product Version : RTW-01
  • Internal Volume : 40L
  • Max Power : 600W
  • Voltage : 100-120V
  • Max Speed : 2.5m/s
  • Noise : 56.5dB
  • Timing : 15 minutes – 12 hours
  • Size : 20.1 15.6 13.2 inch

Product Information

  • The Luxury Towel Warmer is designed for use in families, guest rooms, cloakrooms, bathrooms, and other areas. It serves multiple purposes such as effectively drying wet towels, warming up bath towels and bathrobes, and high-temperature sterilizing clothes, kid’s toys, and more.
  • With its extra-large 40-liter capacity, the towel warmer can simultaneously warm up 2 bath towels and 2 bathrobes, saving time and meeting the needs of the whole family.

Usage Instructions

Operating the Towel Warmer

  1. Place the towel warmer on a hard, dry, and level surface.
  2. Insert the power cord into an electrical outlet. The machine will beep, and the display screen will flash indicating that the towel warmer is on standby.
  3. Open the lid and place the towels inside.
  4. Close the lid.
  5. Press the On/Off button to start the towel warmer. The display screen will show the current remaining time. By default, the towel warmer will automatically turn off after 2 hours.

Setting the Heating Time

  1. Press the On/Off button to start the towel warmer.
  2. In the flashing state, you can press the + or – button to increase or decrease the heating time in 15-minute increments. Alternatively, long-press the + or – button to increase or decrease the heating time in 1-hour increments.
  3. The machine will start running after the flashing stops.

Making an Appointment
(Instructions for making an appointment are not provided in the manual extract)

Using the UV Lamp

  1. The towel warmer has a built-in UV lamp for disinfecting bacteria and maintaining hygiene.
  2. Press the UV button to turn on the UV light. Press the button again to turn off the UV function.

Safety Precautions
When using the towel warmer to heat towels, hang them on the hooks at the side of the bucket. Do not cover the vent. It is  prohibited to fill the bucket body, and keep the vent unobstructed.

Note: Upon pressing the Off button, the heating system of the towel warmer will stop working immediately. However, the internal air duct system will continue to operate for about 5 minutes before coming to a complete halt.

Instructions for Hooks
The towel warmer contains 4 hooks for hanging small towels, socks, underwear, and other clothes.

Note

  • Please install the hooks into the hook slots on the side of the towel warmer before use.
  • When the towel warmer is working or staying in heat, avoid touching the hooks while taking out the towels or clothes to ensure safety.
  • When the towel warmer is not in use, remove the hooks for cleaning. Before installing the hooks again, make sure they are completely dry.

FAQ

  • Q: Can I use the towel warmer for other purposes besides warming towels?
    A: Yes, you can also use the towel warmer to warm up bathrobes, clothes, kid’s toys, and more.

  • Q: How many towels can the towel warmer warm up at once?
    A: The towel warmer can warm up 2 bath towels and 2 bathrobes at one time.

  • Q: Can I adjust the heating time?
    A: Yes, you can adjust the heating time in 15-minute increments or 1-hour increments.

  • Q: How does the UV lamp work?
    A: The towel warmer has a built-in UV lamp that can be turned on to disinfect bacteria. Press the UV button to turn on the UV light and press it again to turn it off.

  • Q: What safety precautions should I follow when using the towel warmer?
    A: When using the towel warmer to heat towels, hang them on the hooks provided and do not cover the vent. It is also important to keep the vent unobstructed and avoid filling the bucket body.

Please read the instruction manual carefully before use and keep it for reference

CONTENTS

FEATURE

  • Towel Warmer is mainly used in families, guest rooms, cloakrooms, bathrooms, and other fields Institute. It can effectively dry wet towels, warm up and high-temperature sterilize bath towels, clothes, kid’s toys, etc.
  • Additionally, removing the musty odor of moisture in the room moderately is beneficial to the health of the people. This towel warmer adopts a 194±41 F high heating temperature that will not damage clothes when drying and fastly sterilize the bath towels, and clothes.
    With an extra large 40-liter holding capacity, the towel warmer can warm up 2 bath towels and 2 bathrobes at one time. Saving time and meeting the needs of the whole family.
Product Name Towel Warmer
Product Version RTW-01
Internal Volume 40L
Max Power 600W
Voltage 100-120V
Max Speed 2.5m/s
Noise 56.5dB
Timing 15Min-12H
Size 20.1 15.6 13.2inch

SAFETY PRECAUTIONS

  • For the sake of preventing property damage, never use accessories that the manufacturer does not recommend. Please do not put this product in water or any liquid. Please stay away from bathtubs, water tanks, showers, and other occasions when using it. If the product falls into the water or gets wet, please do not touch it. Please cut off the power immediately and do not continue to use it.
  • Children are not allowed to play, use alone or touch this product.
  • Hot objects should not be touched or placed near this product.
  • Please cut off the power supply before cleaning and moving this product.
  • If the product breaks down, do not continue to use it. Do not disassemble or repair the product by yourself. If it is damaged, contact the customer service person in time. It is forbidden to use non-conforming or non-standard accessories to avoid product damage.
  • Unplug the equipment from the power socket immediately after each use.
  • Do not use this product for any purpose other than those specified in this manual.
  • When the equipment is inserted and operated, it needs someone to take care of it.
  • Do not use this product if the cable or plug is damaged and cannot work normally, or the equipment falls or is immersed in water. Do not wind wires from the outside of the device.

INSTRUCTION MANUAL

  1. Operating Directly
    • Place the towel warmer on a hard, dry, and level surface.
    • Insert the power cord into an electrical outlet. (The machine “beep” and the display screen will flash. The towel warmer goes on standby)
    • Open the lid and place the towels inside.
    • Close the lid.
    • Press On/Off button, the towel warmer start working. When it is running, the display screen will show the current remaining time. (By default, the towel warmer will automatically turn off after 2 hours)
  2. Set the Heating Time
    • Press ON/OFF button, the towel warmer start working.
    • In the flashing state, you can press “+” or “-” button to set it increase or decrease in 15-minute increments. Or long press “+” or “-” button to set it increase or decrease in 1-hour increments.
    • The machine will run after the flashing stops.
  3. Make an Appointment for Heating Time
    • Press SETUP button to set the circulating temperature in the bucket.
    • In the flashing state, you can press “+” or “-” button to set it to 140°F – 185°F. Based on current set temperature ± 5°F per operation.
    • The machine will run after the flashing stops.
  4. Make an Appointment
    • In the standby state of the machine, you can set the reserved startup.
    • Press the “DELAY” button, and the timing display flashes in hours. In the flashing state, you can
    • press “+” or “-” button to set it to 1-2-3—12 hours.
    • The machine will run the countdown after the flashing stops.
    • The machine will default to work for 2 hour after the countdown ends (unchangeable, if the heating items are not much,you can press the “ON/OFF” button to end it appropriately and early according to the actual situation of heating).
  5. UV Lamp
    • Built-in UV lamp, disinfect bacteria and keep health.
    • Press UV button, the UV light is on. When finished, press the button again to turn off the UV function.

Safety Protection
When using the product to heat the towel, please hang the towel on the hook at the side of the bucket, and do not cover the vent. It is prohibited to fill the bucket body, and keep thevent unobstructed.

NOTE
Upon pressing the Off button, the heating system of the towel warmer will stop working immediately. But the internal air duct system will continue to operate for about 5 minutes. After about 5 minutes, the towel warmer will come to a complete halt.

  • Before plugging please check and make sure the power cord is undamaged.
  • Do not use the wet hand to plug in the adapter. Please do not stand or sit on the product.
  • When moving the product, please do not pull the power cord or drag the product directly to avoid any damage caused.
  • Please do not let children and pets play with the products for preventing any accidents happened. Do not use the wet hand to pull out the power cord in order to avoid any electric shock.
  • Do not use this product in a damp environment to avoid electric shock.

INSTRUCTIONS FOR HOOKS
The towel warmer contains 4 hooks for hanging small towels, socks, underwear, and other clothes.

NOTE

  • Please install the hooks into the hook slots on the side of the towel warmer before use.
  • When the towel warmer is working (or staying in heat), please avoid touching the hooks while taking out the towels or clothes to ensure safety.
  • When the towel warmer is not in use, please remove the hooks for cleaning. Before installing the hooks, make sure they are completely dry.

INSTRUCTIONS FOR FRAGRANCE DISC
This fragrance disc additionally designed is for some users who like to use aromatherapy tablets or essential oils when warming towels. The fragrance disc is an innovative air fresher for your home, which also effectively eliminates odors.

Steps to Install the Fragrance Disc

  1. Remove the fragrance disc from its sealed plastic bag.
  2. Slide it into the fragrance disc holder located on the underside of the lid.

TIPS FOR BEST RESULTS

  • Use heat-resistant cotton or cotton blend towels or fabrics.
  • Avoid using delicate fabrics that cannot withstand high heat. Any fabric indicating that a cool iron must be used may not be able to withstand the heat of the towel warmer, resulting in damage to the fabric and the product.
  • Once the heating cycle has begun, keep the lid closed. This will prevent heat from escaping. Opening the lid mid-cycle may result in slower heating times.
  • For dry fabrics, the heating time is 15 to 30 minutes for enough warmth.
  • For slightly wet small to medium fabrics, like towels or bath towels. The heating time is 1-2 hours for enough warmth and drying.
  • For slightly wet large fabrics, like blankets. The heating time is 4-6 hours for enough warmth and drying.

NOTE
Condensation on the lid and interior of the product is normal.

CARE AND MAINTENANCE

  • Maintenance – before cleaning, ensure that the power supply has been turned off and the plug has been unplugged.
  • When the equipment is wet, please use a soft damp cloth to wipe it.
  • Please do not use strong cleaning agents to clean the towel warmer.
  • Keep chemical corrosive substances away from the product to prevent affecting its use.
  • Do not unplug the power plug with wet hands.
  • It is strictly forbidden to clean the equipment with water, and it is strictly forbidden to spray water or spray any liquid inside the equipment.
  • During maintenance, confirm that the power supply has been turned off and the plug has been unplugged from the socket.
  • Sweep away the dust. Please keep the equipment clean and away from damp places.
  • Please store this equipment in a cool and dry place to avoid children’s contact.
  • Avoid contacting sharp edges or sharp objects, which may cut or puncture the equipment.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals