acer RL2 Series LCD Monitor User Guide

acer RL2 Series LCD Monitor User Guide

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:
   • Turn off the LCD monitor and unplug the power cord.
   • Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20°C to 60°C (-4°F to 140°F). Storing the LCD monitor outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
   • Monitor-to-PC signal cable is frayed or damaged.
   • Liquid spills onto the LCD monitor or the monitor is exposed to rain.
   • The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.
2. Attach the footstone to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer’s power cord.
2. Connect the signal cable to VGA (optional) and/or HDMI (optional) input socket of the monitor, and the VGA (optional) and/or HDMI (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the monitor.
5. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
   

Note: Audio output is only for audio output model. Please check user manual for more instruction.
External controls

on. Blinking blue indicates standby/power saving mode
2| | OSD function| a. Press to view Main page. Press again to enter next function in the Function Menu. b. When the Function Menu is active, press this key selected or move to the next function.
3| | Input| a. Press to view Main page. Press again to enter Input select function.
b. When the Function Menu is active, press this button selected or move to the previous function
4| | Volume or Contrast| a. Press to view Main page. Press again to enter Volume or Contrast adjustment function.
b. When the Function Menu is active, this button will enter a selection in the OSD.
5| | Brightness| a. Press to view Main page. Press again to enter brightness adjustment function.
b. When the Function Menu is active. Press to return previous Menu or exit current Menu
6| | Mode| a. When the Main page is active. Press to trigger the Game mode control.
b. When the Function Menu is active, press to exit current Menu.

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product. In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that  may cause undesired operation.

Notice: Canadian users

CAN ICES-003(B)/NMB-003(B)

Restriction on Hazardous Substances statement (India)

This product complies with the “India E-waste Rule 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information ab ut where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Acer monitor is purposed for video and visual display of information obtained from electronic devices.

SPECIFICATION

(Only HDMI-Input Model)
Speakers| 2W x 2 (Only Audio-Input Model) (Typical)
Audio| Audio-Input (Only Audio-Input Model)
Audio-Output (Only Audio-Output Model)
Maximum Screen Size| Horizontal:598mm Vertical:336mm
Power Source| 100-240V~, 50/60Hz
Environmental Considerations| Operating Temp: 0°C to 40°C Storage Temp: -20°C to 60°C Operating Humidity: 20% to 80%
Dimensions| 612.3(W) x 436.1(H) x 223.8(D)mm
Weight (N. W.)| 3.5kg Unit (net)
**** Mechanism spec| Tilt: -5° to + 25° Swivel: NoHeight adjustment: No Pivot: NoDetachable foot stand: Yes
**** External Controls:| **** Functions| Brightness Mute Contrast                                              Over DriveBlack Boost                                       AMD FreeSyncLow Blue Light Refresh Rate NumACM                                                   VRBSuper Sharpness                               LanguageAuto Config OSD TimeoutH. Position                                         TransparencyV. Position                                         OSD LockFocus InputClock                                                  Auto SourceGamma Wide ModeColor Temp.                                        Hot Key AssignmentModes                                                DDC/CIsRGB Mode HDMI Black LevelGrayscale Mode                                  Quick Start Mode6-axis Hue                                          Reset All Settings6-axis Saturate Volume

• All specifications are subject to change without notice.

Find manuals and other documents for your Acer product on the official Acer support website.

EU Declaration of Conformity

We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221
And,
Acer Italy s.r.l.
Viale delle Industrie 1/A, 20044 Arese (MI), Italy
Tel: +39-02-939-921 ,Fax: +39-02 9399-2913

Product: LCD Monitor
Trade Name: ACER
Model Number: RL272
SKU Number: RL272 xxxxxxxxx  (“x” = 0~9, a ~ z, A ~ Z, or blank)

We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is inconformity with the relevant Union harmonization legislations as below Directive and following harmonized standards and/or other relevant standards have been applied:

• EMC Directive: 2014/30/EU
• EN55032:2015+AC:2020 Class B
• EN IEC 61000-3-2:2019 Class D
• EN 55035:2017+A11: 2020
• EN61000-3-3:2013+A1: 2019
• LVD Directive: 2014/35/EU
• EN 62368-1: 2014+ A11:2017
• RoHS Directive: 2011/65/EU
• EN IEC 63000:2018
• ErP Directive: 2009/125/EC
• (EU) 2019/ 2021; EN 50564:2011

Year to begin affixing CE marking: 2022.

**RU Jan / Sr. Manager Date Acer Incorporated (New Taipei City)

**

Aug. 19, 2022

Product Information for EU Energy Label

Documents / Resources

| acer RL2 Series LCD Monitor [pdf] User Guide
RL2 Series, RL2 Series LCD Monitor, LCD Monitor, Monitor
---|---

References

• Acer Laptops, Desktops, Chromebooks, Monitors & Projectors | Acer United States

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>