Hesung PF005S Air Circulator Fan User Manual
- June 15, 2024
- Hesung
Table of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- ASSEMBLING YOUR PEDESTAL AIR CIRCULATOR
- CONNECTING TO YOUR PEDESTAL AIR CIRCULATOR POLYFAN 715S
- KNOWING YOUR PEDESTAL AIR CIRCULATOR
- USING YOUR PEDESTAL AIR CIRCULATOR
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- DREO CUSTOMER CARE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Smart Pedestal
Air Circulator Fan
PolyFan 715S
USER MANUAL
www.dreo.com
Looking for help?
Contact us to get expert support.
support@dreo.com
888-290-1688
www.dreo.com
Mon – Fri, 9:00 am-5:00 pm PST/PDT
“Thanks for Choosing DREO!
Your support means the world to us. We hope you enjoy our product as much
as we did creating it.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.
Do not cover the air inlet and outlet while in operation.
Do not use the air circulator near flammables and combustibles.
General Safety
- Children shall not play with the appliance. Cleaning and maintenance Shall not be performed by children without supervision.
- Use the appliance as described in the user manual only. Any other use not recommended in the user manual may cause fire, electrical shock, or personal injury.
- This appliance can be used by children aged above 8 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of this appliance in a safe way and understand the hazards involved.
Operation Safety
- Place the appliance on a flat, dry surface before use.
- Do not immerse in water and any other liquids.
- Do not use the appliance until the base is installed.
- Do not insert your fingers, pencil, and any other objects into the grilles under any circumstances.
- Do not dismantle, repair, or modify. All servicing should be performed by qualified personnel.
- Do not operate the unit close to the curtain. Do not hang foreign objects on the grille to prevent damaging the balance of the fan or rotational structure.
- Do not operate the fan under overly humid, high-temperature, dusty environment or the place where acid or alkali is stored.
- Fans should never blow directly on infant, the elderly and patients for a long time.
- When the unit is not operated during maintenance period, please cut off the power and then unplug the power plug.
- Do not pull the power with wet hands.
- Do not put or install the fan on the oblique plane to prevent inclination or other abnormal phenomenon.
- During the operation process, do not insert your fingers or sharp objects into grille to prevent personal injury or damage to the fan.
- Do not operate the fan under overly humid, high-temperature, dusty environment or the place where acid or alkali is stored. Do not operate the unit close to fire source or inflammable objects.
Electricity Safety
WARNING:
-
Make sure that the voltage of your electricity supply is the same as that indicated on the appliance.
-
Always unplug before cleaning or leaving the appliance unused for a long period of time. Keep your hands dry when plugging / unplugging.
-
Do not operate any air circulator with a damaged cord or plug.
Discard a circulator or return to an authorized service facility for examination and/or repair. -
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
-
WARNING: To reduce the risk of fire or electric shock, do not use this air circulator with any solid-state speed control device.
-
Use 24V/1.5A power adapter only. Turn off the appliance before plugging.
-
WARNING: To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. parts made at home using a 3D printer).
-
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
-
WARNING: To reduce the risk of fire, electric shock and injury to persons, the unit body must be installed with the chassis that are marked (on their cartons) to indicate the suitability with this model. Other chassis cannot be substituted.
FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS
Gentle Reminder:
Check the appliance regularly and refer to TROUBLESHOOTING or contact our
customer support if it shows any of the following signs:
- Power cord or plug is damaged.
- Loud noise, unusual smell or excessive heat.
Specifications
Model No. | DR-HPF005S |
---|---|
Power Supply | 24V **** 1.5A |
Rated Power | 36W |
Power Adapter | Input: |
120V∼60Hz 1.0A
Output:
24V **** 1.5A
Battery Type| CR2025 3V
ASSEMBLING YOUR PEDESTAL AIR CIRCULATOR
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
|
---|---
Align the air circulator’s cutout with the base’s jutting point and push them
together.| Insert the screw through the flat washer, into the base, and use
the provided screwdriver to secure it to the bottom of the air circulator.
|
Put the fan upright, and rotate the Adjustment Collar counterclockwise to
adjust the height of the air circulator.| Tighten the adjustment collar by
rotating clockwise. Plug the power adapter into the power (located at the back
of the air circulator), and into
the power outlet.
CAUTION
Do not operate the alr circulator if the base has not been installed.
DO not manually oscillate the fan.
Package Contents
CONNECTING TO YOUR PEDESTAL AIR CIRCULATOR POLYFAN 715S
This device includes the radio transmitting module whose CMIIT ID is FCC ID: 2A3SYPFOOSS.
https://bc.dreo.com/app?model=haf003s®ion=na
Before connecting the appliance to your mobile device, please scan the QR code on the left or to the app store and search “Dreo,” then select and download the app.
Look for “PolyFan 715S” when connecting your new pedestal air circulator fan.
You can use the Dreo app to connect your smart pedestal air circulator to
Amazon Alexa or Google Assistant.
Please follow the in-app instructions to set up your voice assistant.
NOTE: You must create a Dreo account to access voice assistants.
-
Launch Dreo and sign in or create account by following in-app instructions.
-
Enable Bluetooth on your mobile device and plug in your air circulator.
-
Hold the Oscillation button for 5 seconds to start WiFi connection settings.
( Tip: The WiFi icon will keep flashing when pairing.) -
Tap + Add Device and select PolyFan 7158S.
-
Follow in-app instructions to complete WiFi connection.
-
You’re now ready to control the appliance on your app.
( Tip: To restart connection settings, hold the Oscillation button again for 10 seconds.)
KNOWING YOUR PEDESTAL AIR CIRCULATOR
Getting the Most out of Your Air Circulator
Summer:
Use with Air Conditioner
Position the air circulator in front of your AC to circulate cold air and
provide better cooling.
Winter:
Use with Heater
Send the heat to corner of the room and circulate warm air faster.
Spring & Fall:
Circulation
Make the indoors as fresh and pleasant as the outdoors.
Control Panel
| Power Button
• Turn power on/off
• Long press 10 seconds to reset to factory settings
---|---
| Mode Button
Switch between NormaVAuto/Turbo Mode
| Fan Speed Button
• Adjust airflow speed (1-12 levels)
• Exit turbo mode
| Vertical Oscillation
• Sweep airflow vertically (Default 85°, 85°160°/30°/0°)
• Long press 3 seconds to mute/unmute
| Horizontal Oscillation
• Sweep airflow horizontally (Default 90°,120°190° /60300°)
• Long press 5 seconds to start network settings and device pairing
Note: This appliance is mute by default. To turn on button sounds, go to the Dreo app.
LED Display
USING YOUR PEDESTAL AIR CIRCULATOR
General Operations
Working Modes (Press on the remote contro)
| Normal Mode
Air circulator runs at the fixed speed.
---|---
| Auto Mode
Air circulator speed adapts to the ambient temperature.
| Turbo Mode
Air circulator runs at the maximum speed.
| Natural Mode
(Available in the Dreo app)
Air circulator runs at alternating speeds.
Custom Mode
(Available in the Dreo app)
Air circulator speed changes according to temperatures.
Sleep Mode
(Available in the Dreo app)
Mute auto on.
Air circulator soeed decreases every 30 minutes.
Speed decreases by three levels at most and will remain constant if at level
3, 2, or 1:
For level 12: 12→11→10→9
For level 11: 1→10→9→8
For level 10: 10→9→8→7
For level 9: 9→8→7→6
For level 8: 8→7→6
For level 7: 7→6→5
For level 6: 6→5→4
For level 5: 5→4→3
For level 4: 4→ 7 →3
For level 3: 3
For level 2: 2
For level 1: 1
| Timer
When the fan is ON/OFF, touch the timer button on the remote control
repeatedly to set a timer from 1 to 12 hours. When the timer ends, the fan
will stop/start running automatically. To cancel, set the time to 0 hour.
Note: When the auto off timer is enabled, display will return to fan
speed after 3 seconds.
---|---
| Child Lock
Long press the Horizontal Oscillation button and Vertical Oscillation button
at the same time for 3 seconds to turn on/off Child Lock.
Note: Child Lock doesn’t apply to operations from the remote control.
You can also turn off Child Lock by re-plugging in, or through the Dreo app.
| Memory
If the fan is turned OFF or disconnected from power, it will operate under the
previous settings (except the Timer setting ) when it is turned ON again.
| Display Auto Off
Display turns off after 1 minute (after 5 seconds in sleep mode).
Wake up the display with any button.
To disable this feature, please go to the Dreo app.
Remote Control
Battery Replacement
- Press the locking button to pop out the battery holder.
- Replace with the same battery type with the (+) side facing up.
- Push in the holder until securely locked into place.
Note: If the indicator on the remote control doesn’t turn on any more, please consider replacing the battery.
WARNING
Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium buttor/coin cell battery. If a new or used
lithium buttor/coin cell battery is swallowed or enters the body it can cause
severe internal burns and can lead to death in as little as 2 hours. Always
completely secure the battery compartment. If the battery compartment does not
close securely, stop using the product, remove the battery, and keep it away
from children. If you think batteries might have been swallowed or placed
inside any part of the body, seek immediate medical attention.
The batteries must be disposed of properly, including keeping them away from
children. Even used cells may cause injury.
CLEANING AND MAINTENANCE
CAUTION
- Always unplug the fan before any cleaning or maintenance to avoid the risk of fire, electric shock, or injury to persons.
- Do not immerse in water or get water inside the motor housing.
- Do not use any chemical agents when cleaning the fan.
- Store in a cool, dry place and cover it to protect from dust.
Grilles
WARNING
To reduce the risk of electrical shock and injury to persons, turn off and
unplug the appliance before any cleaning and maintenance.
|
---|---
Remove the screw on the front grille.
Note: Please use the button, remote control, or app to adjust the optimal
fan angle for removing screws, do not manually handle it.| Rotate the grille
counterclockwise until the on the grille aligns with the on the casing.
|
Take the grille off.| Remove the blade cap by rotating it clockwise and take
the two blades out of the shaft.
|
Rinse cap, blades, and grille under running water or with a clean, damp
cloth.| Dry up all parts, and insert the 2 blades back into the shaft by
aligning the D-shaped point on the center.
|
Rotate the blade cap counterclockwise to tighten.| Align the on the grille
with the on the casing, then rotate the grille clockwise to align the with the
.
Install the screw back in place.
TROUBLESHOOTING
My air circulator won’t turn on!
Make sure that the cord is connected to a powered outlet and the mains voltage
corresponds with the voltage indicated on the air circulator.
My air circulator is shaky and wobbling!
- Place the air circulator on a flat, level surface.
- Incorrect installation might also cause shakiness. Please refer to the assembly instructions in page 4-5.
My air circulator is making vibration and noise!
- Place the air circulator on a flat, level surface.
- Be sure not to insert anything into the air inlet and outlet.
DREO CUSTOMER CARE
Default 12-Month Warranty
This appliance is covered by Dreo warranty for 12 months from the date of
its original purchase.
Extend Your Warranty
Extend your warranty by registering your new appliance on our website
https://dreo.com/warranty.
The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purposes.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo.
We can only provide after-sales service for products that are sold by Dreo or
Dreo authorized retailers and distributors. If you have purchased the
appliance from a different place, please contact your seller for return and
warranty issues.
CAUTION: Any changes or modifications not expressly approved?could void
the user’ s authority to operate the equipment.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
Please note that changes or modifications of this product is not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with FCC RF exposure compliance requirements, please follow operation
instructions as documented in this manual. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body. The availability of some specific
channels and/or operational frequency bands are country dependent and are
firmware programmed at the factory to match the intended destination. Tne
firmware setting is not accessible by the end user.
Model No.: DR-HPFOO5S
Rev_1.0_EN
We’re Here to Help!
888-290-1688
Mon – Fri, 9:00 am-5:00 pm PST/PDT
support@dreo.com
www.dreo.com
Shenzhen Hesung Innovation
Technology Co., LTD
26F, Bidg A7, Creative City, Shenzhen, China