KeoBin L2800 RGB Double Projection Laser Lamp User Manual

KeoBin L2800 RGB Double Projection Laser Lamp User Manual

Questions or Concerns?
Our team will solve your any problems in 24hours [email protected]
This manual contains important laser system safety and operation information. Read and understand all instructions prior to powering on laser unit the first time, to avoid laser eye enjoy and to avoid breaking the law. Keep this manual in a safe place for future reference.

Warranty Warnings:

1. Damages caused by the disregard of this user manual are not subject to Warranty.
   The dealer will not accept liability for any resulting defects or problems.

2. Please consider that unauthorized modifications on the device are forbidden due to safety reasons.
   Please note that damages caused by manual modifications on the device or unauthorized operation by unqualified persons are not subject to warranty.

3. If this device will be operated in any way different to the one described in this manual, it may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-circuit, burns electric shock, etc.

For any questions about this light, please contact your dealer or our company for service.

General Instructions

Unpacking:
Thank you for purchasing this product. Please read user guide for safety and operations information before using the product. Keep this manual for future reference. This product can create perfect light programs and effects since it has passed a series of strictly tests before delivery. Please check the attachments listed on the page after opening the carton. Immediately upon receiving a fixture, carefully unpack the box. Check the box contents to ensure that all parts are present and that they are in good condition. If any part appears damaged from shipping, or if the box shows signs of mishandling, notify the shipper immediately.
What is included: 1 Light, 1 Power Cable, 1 User Guide ,1 remote control

Safety Notice: Please read the following notes carefully because they include important safety information about the installation, usage and maintenance of this product. It is important to read all these notes before starting to work with this product.

Lasers can be hazardous and have unique safety considerations. Permanent eye injury and blindness is possible if lasers are used incorrectly. Pay close attention to each safety REMARK and WARNING statement in the user manual. Read all instructions careful.

Laser Safety Warnings

Potential laser injury hazard exists with this product! Read these Instructions carefully, which include important information about installation, safe use and service!
Caution:

• • Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser radiation.
• *This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.
• *It is illegal and dangerous to shine this laser into audience areas, where the audience or other personnel could get direct laser beams or bright reflections into their eyes.
• *It is a US Federal offense to shine any laser at aircraft.

NON-INTERLOCKED HOUSING WARNING

*This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation. The laser power levels accessible if the unit is opened can cause instant blindness, skin burns and fires.

Installation

Laser effects projected 3 meters (9.8 ft) above the audience are eye safe. A survey should be taken to assess the likelihood of any reflective surfaces (such as high windows, chrome bars etc) bouncing stray beams back down into the audience.
Using a fastening clamps on the light and tight to the ceiling in a strong hook..
*Make sure its correct power output and plug the power cable to the wall socket.

• Power must be in earth! Power on the light.
• Do not shoot the beams to the audience!
  *Do not look direct into the laser aperture once the laser light is ON. Please pay attention to the Laser Danger Warning Label!

Caution
After setting up, and before public use, test laser to ensure proper function. Do not use if any defect is detected. Do not use if laser emits only one or two laser beams rather than dozens/ hundreds, as this could indicate damage to the diffraction grating optic, and could allow emission of higher laser levels above Class 3B.
Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.
Do not point lasers at highly reflective surfaces, such as windows, mirrors and shiny metal. Even laser reflections can be hazardous.
Never point a laser at aircraft, this is a federal offense.
Never point un-terminated laser beams into the sky.
Do not expose the output optic (aperture) to cleaning chemicals.
Do not use laser if the laser appears to be emitting only one or two beams.
Do not use the laser if the housing is damaged, the housing is open, or if the optics appear damaged in anyway.
Never open the laser housing. The high laser power levels inside of the protective housing can start fires, burn skin and will cause instant eye injury.
Never leave this device running unattended.

During Assembly, operation, maintenance, please pay special attention to avoid possible exposure to laser and collateral radiation in excess of the accessible emission limits.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Protective eye wear is typically require,/ where direct viewing of a Class 3B laser beam may occur.

REMOTE CONTROL FUNCTION:

Laser Expected Lifespan
Laser gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration of this decline. Packaged in clusters, Laser exhibit higher operating temperatures than in ideal or singular optimum conditions. For this reason when all color Laser are used at their fullest intensity, life of the Laser is significantly reduced. It is estimated that a viable lifespan of 5,000 to 10,000 hours will be achieved under normal operational conditions. If improving on this lifespan expectancy is of a higher priority, place care in providing for lower operational temperatures. This may include climatic-environmental and the reduction of overall projection intensity.

WHAT’S IN THE BOX

Double projection laser lamp xl
Power Cable xl
Remote Control xl
User Manual x 1

INTRODUCTION

♦Feature: Double-projection laser lamp combine RGBUV LED effect, Red and blue the beam Light; Red and green pattern laser lamp; LED Strobe; so that a single device can display 4 effects, either work together or separate.
♦ Scanner High-speed optical scanner, big angle scanning
♦ Play Mode Sound Active, AUTO-Beam, DMX, Master/ Slave, Remote Control
♦ DMX channel: l 8CH
♦Power Supply Bi-Voltage: ACl00V ~ 240V /2A, 50/60HZ
♦ Applicable place: company advertising, superstar fashion show, DJs, Bands, Bars, Pubs, Clubs, Roller skating rinks, KTV, Family Party, etc. Fixture Rear Plate:

“Menu” is Menu, ” Enter” is confirm, “Previous” is UP, “Next” is down.
Menu: Function mode selection, such as auto strobe, sound active strobe, DMX512 and Dimming mode ( This dimming mode can only be set by staff. Please do not set this mode.)
Up/Down: Previous/Next selection or Increase/Decrease selection.
Enter: Confirm and save the selection.

DISPLAY MENU:

OMX channel:

Thank you for your order. Please do not hesitate to contact us with any questions issues or concerns you may have about our products we are more than happy to help.
As a growing business, we know how scarce time can be, so we especially appreciate your time and input.

[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>