Treocho ET2205 Side Table with Charging Station Instruction Manual

End Table
ET2205

Assembly Instructions

We have designed our furniture with you,the customer in mind.Our clear, easy to follow step by step instructions will guide you through the project from start to finish. Please believe that this will be a fun and rewarding project.
The assembled product will be a quality piece of furniture that will go together smoothly and give years of enjoyment.
Please do not return to the store
Broken or missing Hardware?
Neen help with Assembly?
If you have any questions just email us at service@treochofurniture.com

Completed Assembly

Parts Description

Assembly Requirements:

1-Person
Assembly| 0.5 Hours
Assembly Time
(Average)| Tools Required
(Wrench)| Phillips Screwdriver
Flat Screwdriver|
---|---|---|---|---

Note: Please do not use any power tools. Using of power tools may cause damage and void manufacture warranty.
Instructions For Fastening
Cam Bolt and Cam Lock
CAM BOLT
CAM LOCK

Cam Bolt
Place Cam Bolt on the designated pre-drilled hole on the panel. Use a Phillips Screwdriver to screw in Cam Bolt vertically until shoulder is snug and flushed with panel. Do not over-tighten or under-tighten Cam-bolt. See illustrations below.

|
---|---
Shoulder is flushed (on the same level) with the panel.| Shoulder is above the panel.

CAM-LOCK
Align the arrow on the Cam-lock to the Cam-bolt head and insert the Cam- lock.

Use a Flat-head Screwdriver to turn Cam Lock clockwise to lock onto the head of the Cam Bolt. Turn until it is snug (about a half turn) — over-tightening could damage Cam Lock and/or Cam Bolt.

Step 1

1. Screw Cam Bolt (A) into Bottom Panel (4).
2. Attach Bottom Left Side Panel (7) and Bottom Right Side Panel (8) to Bottom Panel (4), using Cam Bolt (A) and Cam Lock (B).

Step 2
Screw Cam Bolt (A) into Back Panel (1) and Front Panel（2）.

Step 3

1. Attach Left Side Panel（5）to Back Panel（1）, using Cam Bolt（A）and Cam Lock（B）.
2. Attach Right Side Panel（6）to Back Panel（1）, using Cam Bolt（A）and Cam Lock（B）.
3. Attach the assembly to Back Panel（1）, using Cam Lock（B）.

Step 4

1. Attach Front Panel（2）to the assemmbly, using Cam Lock（B）.
2. Using Foot Pad(N) to cover the bottom of table legs.

Step 5

1. Attach Right Gilder（I）to Right Side Panel（6）, using Screw（G）.
2. Attach Right Gilder（I）to Bottom Right Side Panel（8） , using Screw（G）.
3. Attach Left Gilder（H）to Left Side Panel（5）, using Screw（G）.
4. Attach Left Gilder（H）to Bottom Left Side Pane（7）, using Screw（G）.

Step 6

1. Screw Cam Bolt（A）into Top Panel （3）.
2. Attach Top Panel（3）to the assembly with Cam Lock（B）.

Step 7

1. Screw Cam Bolt（A）into Drawer Front Panel（9）.
2. Attach Drawer Front Panel（9）to Drawer Left Panel （12） and Drawer Right Panel（13）by Wood Dowel （C）and Cam Lock（B）.
3. Insert Drawer Bottom Panel（10）into the drawer frame.
4. Attach Drawer Back Panel（11）to Drawer Left Panel （12） and Drawer Right Panel（13）with Screw（F）.
5. Attach Left Slider（J）to Drawer Left Panel（12）with Screw（G）.
6. Attach Rightt Slider（K）to Drawer Right Panel（13）with Screw（G）.
7. Attach Knob（D）to Drawer Front Panel（9）with Bolt（E）.
   Repeat the above steps to complete the second drawer.

Step 8
Insert the drawer to the table.

Step 9
Insert Outler（L）to the assembly using Screw（G）.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>