AQUAEARTH Bidet Sprayer for Toilet Installation Guide
- June 14, 2024
- AQUAEARTH
Table of Contents
AQUAEARTH Bidet Sprayer for Toilet
HOW TO USE
- SHUT OFF THE WATER
- TOILET BDRAIN THE ARREL
- REMOVE THE WATER SUPPLY HOSE FROM THE BARREL
- USE TEFLON TAPE ON THE T-ADAPTER ANYWHERE THERE’S THREAD
- REMOVE THE PLASTIC CAP FROM THE HOSE
- REMOVE THE PLASTIC PLUG FROM THE HOSE
- MAKE SURE THERE IS A GASKET IN THE HOSE
- MAKE SURE THERE IS A GASKET IN THE HOSE
- ATTACH THE HOSE TO THE BIDET SPRAYER – MAKE SURE YOU FASTEN THE RIGHT SIDE
- SCREW HOSE TO T-ADAPTER AS SHOWN IN THE PICTURE
- LIFT UP THE TOILET COVER DRUM
- INSSPRATALL BIDET YER HOLDER
- CLOSE THE TOILET LID
- USE TEFLON TAPE
- SCREW T-ADAPTER TO THE BARREL
- SCREW THE WATER SUPPLY HOSE TO THE T-ADAPTER
- SET BIDET SPRAYER TO HOLDER
Important Friendly Reminder
Please kindly keep the T-valve off after each use. If you choose to turn on
the T-valve all the time, you may weaken the bidet sprayer’s internal
component due to the constant water pressure, and over time, it may cause
flooding or water damage.
The handle is conveniently controlled, please take a few seconds to shut it
off. Aqua Earth LLC is not responsible for any damage caused by failure to
follow this advice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>