SUNVIE Low Voltage Landscape Light User Manual
- June 14, 2024
- SUNVIE
Table of Contents
SUNVIE Low Voltage Landscape Light
specifications
- Wattage: 3 Watts
- Construction: Aluminum
- Waterproof Rating: IP65
- Voltage: 12-24 Volts AC/DC
- Finish Color: Black
- Working Temperature: -4~104°F
Installation Instructions
- Thread the wire through the pole, then screw the light clockwise onto the pole.
- Place the wire at the notch of the stake, and screw the stake clockwise onto the pole.
- Step on the pedal on the stake gently and insert it into the ground. If the ground is too hard, loosen the soil first.
- Place the shade and screw it clockwise onto the fixture top.
Troubleshooting
Problem: All of the lights fail to work
Probable Cause:
- Check that the transformer power is on.
- Check if there is a loose connection at the transformer screw terminal with the cable.
- Check that the power switch is not in an OFF setting.
Problem: Few lights not work properly
Probable Cause:
- Check the connector to make sure the pin has pierced the landscape cable.
- Test by connecting the faulty lights directly to transformer taps or a 12V battery.
Warranty & Support
24 Months Warranty and Lifetime Service In case of any product failure or missing, please contact us to get a free replacement within the warranty period. If you have any questions about product installation or operation, please feel free to contact us through Amazon.
FAQ
Q: What is the wattage of the Low Voltage Landscape Light?
A: The wattage of the Low Voltage Landscape Light is 3 Watts.
Q: What is the waterproof rating of the light?
A: The light has a waterproof rating of IP65.
Q: What is the working voltage range?
A: The working voltage range is 12-24 Volts AC/DC.
Q: What is the working temperature range?
A: The working temperature range is -4~104°F.
SPECIFICATIONS
- Wattage: 3 Watts
- voltage: 12-24 Volts AC/DC
- Construction: Aluminum
- Finish Color: Black
- Waterproof Rating: IP65
- Working Temperature: -4℉~104℉
INSTALLATION INSTRUCTIONS
- Thread the wire through the pole, then screw the light clockwise onto the pole.
- Place the wire at the notch of the stake, and screw the stake clockwise onto the pole.
- Step on the pedal on the stake gently and insert it into the ground. (If the ground is too hard, loosen the soil first.)
- Place the shade and screw it clockwise onto the fixture top.
TROUBLESHOOTING
| Problem | Probable Cause |
|---|
All of the lights fail to work
| Check that the transformer power is on. Check if there is a loose connection at the transformer screw terminal with the cable.
Check that the power switch is not in an OFF setting.
Few lights not work properly
| Check the connector to make sure the pin has pierced the landscape cable.
Test by connecting the faulty lights directly to transformer taps or a 12V battery.
WARRANTY & SUPPORT
24 Months Warranty and Lifetime Service
In case of any product failure or missing, please contact us to get a free replacement within the warranty period. If you have any questions about product installation or operation, please feel free to contact us through Amazon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>