URBZUE ot-31 Sports Car Shaped Separable Magnetic Power Bank User Manual
- June 14, 2024
- URBZUE
Table of Contents
Sports Car Shaped Separable Magnetic
Power Bank
User Manual
Please read this user manual completely and keep it properly
Product Parameter
Name: Hand Warmer Power Bank
Model No.: OT-91
Cell Type: Polymer Lithium-Ion Battery
Capacity: 5000mAh X 2
Type-C input: 5V/2A
Output: 5V/2A
Size: 1106338mm
Weight: 230g
3 temperature level: 40°C – 45°C, 45°C – 50°C, 50°C – 55°C
Product Description
The product has the characteristics of hand warmer and power bank function. It has built-in over-current, over-voltage ,over-temperature, short-circuit protection and other multiple security protection circuits.
Instructions for the Use of Product
Please follow the instructions when your mobile phones or other digital devices by using this hand warmer power bank.
- Check and make sure the charging voltage of your digital products is consistent with the voltage output of this hand warmer power bank.
- Select and use the original charging cable of your digital device, connect one end of it with your digital device, and the other end with the output port of the hand warmer power bank, it will automatically start to charge your digital device.
Charging this hand warmer power bank by using a AC charger or PC USB port.
| Capacity | LED1 | LED2 | LED3 |
|---|---|---|---|
| 0%~33% | flashing | destroy | destroy |
| 34%~66% | bright | flashing | destroy |
| 67%~99% | bright | bright | flashing |
| Charge 100% | bright | bright | bright |
- Select and use the original USB cable, connect the USB port with the Micro or type-C input port of this hand warmer power bank.
- Connect the Micro or type-C connector with the USB port of AC charger or PC USB port, when the LED indicator begins to flash, that is charging this hand warmer power bank. When being fully charged, the LED indicators become lit constantly.
Heating Mode:
The button has the function of turning on/off the heating mode and switching
the temperature level.
| Button | LED indicators | Temperature level | Temperature |
|---|---|---|---|
| 1. Press and hold for 4s | 1 red light on | Low temperature | 40-45°C |
| 2.Press 1 time after step 1 | 2 red lights on | Middle temperature | 45-50°C |
| 3.Press 1 time after step 2 | 3 red lights on | High temperature | 50-55°C |
| 4.Press and hold for 4s | red lights off |
Note：
- When heating function is on, the hand warmer cannot charge other device.
- When charging other device, heating function can be on, and charging will stop.
- When charging the hand warmer, heating function cannot behand warmer.
Packing List
Power Bank
30cm Type-C charging cable User Manual
Use environment
Use ambient temperature: Non-tropical area below 0°C to 40°C.
Storage ambient temperatures: 0°C to 40°C degrees Celsius.
Safety Warning Instructions
- Due to the existence of conversion efficiency, rated output capacity is less than battery capacity.
- When you need to check the power, press the power button twice and the LED indicator lights up to show the current power.
- Please charge your power bank periodically (at lease one time in 5 months recommended) for longer life spam.
- Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Disintegration of this product by non-professionals is strictly prohibited.
- Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection).
- Intense physical actions including knocking, throwing, trampling on and squeezing, etc, shall be avoided.
Matters Needing Attention
- Please fully charge this hand warmer in first-time using.
- Please select the correct charger and charging cable when charging the hand warmer or charging other devices.
- Please unplug the charger when out or staying out for long time.
- Please unplug the cable after fully charging other devices or being fully charged in order to avoid the loss due to long period of connection.
- Please keep the power of the hand warmer between 25% – 50% and keep it in cool and dry place if the hand warmer will not be used for long time. This can protect the product and prolong the battery life.
Statement on Toxic and Hazardous Substances in Electronic information Products
| Part Description | Toxic or hazardous substances and elements |
|---|---|
| Lead (Pb) | Mercury |
| (Hg) | Cadmium |
| (Cd) | Hexavalent chromium (Cr(VI) |
| (PBB)** | Polybrominated biphenyls ethers |
(PBDE)
PCB| X| 0| 0| 0| 0| 0
Electrode| 0| 0| 0| 0| 0| 0
Battery| X| 0| 0| 0| 0| 0
Casing| 0| 0| 0| 0| 0| 0
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the toxic and harmful substance in all
homogeneous materials of the component is below the limit specified in GB/T
26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous
material of this part exceeds the limit stipulated in GB/T26572 standard.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>