aowoka A9 ENC Noise Cancelling Wireless Headset Instruction Manual

aowoka A9 ENC Noise Cancelling Wireless Headset

Please read the instructions before use

Connect

1. Short press the headset function key
2. After open the phone Bluetooth, Click the < A9 > to Pairing

Reset

If headset has any connection or function problems, please reset the headset

1. Delete the BT pairing information on the phone.
2. Clear pairing: In the charging state, press and hold the function button for 5s until the green light flashes for 2s.

(If the above operation does not work, please try again)

Operation

• X1: Click Once
• X2: Click 2 times
• 2S: Press and hold for 2 seconds
• 3S: Press and hold for 3 seconds

Problem handling

1. Can be connected but there is no sound: Click the headset to increase the volume.
2. Headset cannot be charge: Clean the charging contact of the headset and the charging case.
3. Headset cannot be connected: Reset the headset.

If the headset cannot be charged, please activate the warranty and contact us to send a new product.

Please clean the charging contacts of the earbuds and charging case frequently to avoid charging failures.

Safety Instructions

1. Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
2. Avoid liquid immersion into the product.
3. Do not disassemble the product.
4. Do not use concentrated chemical products or detergents to clean the product.
5. Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
6. Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.

eVatmaster Consulting GmbH

• Bettinastr. 30,60325 Frankfurt am Main,Germany
• [email protected].

EVATOST CONSULTING LTD

• Suite 11, First Floor, Moy Road, Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
• [email protected].

Made in China.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>