Cricket Mini Golf Carts SX3 Electric Sport Vehicle Instruction Manual

Cricket Mini Golf Carts SX3 Electric Sport Vehicle

Product Information

The Cricket Mini Golf Cart SX3 is an electric sport vehicle designed for transportation on various terrains. It offers a compact and efficient mode of transportation for both personal and recreational use. The specifications and safety features of the SX3 may be subject to change as the manufacturer continues to improve the vehicle.

General Safety Information

The SX3 is equipped with safety measures to ensure the well-being of both the operator and passengers. It is important to follow the safety guidelines and precautions provided in the user manual to prevent accidents or injuries. The following warnings should be taken into consideration:

• Operating the SX3 in wet areas may affect stability and traction.
• Exercise caution when navigating blind spots, sharp turns, bridge approaches, and areas with loose terrain.
• Avoid operating the vehicle in dense traffic or pedestrian areas whenever possible.

It is crucial to follow the instructions and warnings outlined in the user manual to prevent damage to the vehicle and ensure personal safety. Failure to do so may result in severe injury or death.

Product Usage Instructions

• Proper operation, maintenance, and adjustment of the SX3 Electric Sport Vehicle are essential for safety and optimal performance. If you have any questions or doubts regarding the operation or maintenance, it is recommended to contact Cricket Mini Golf Carts directly for technical support.
• To access technical support, you can call Cricket Mini Golf Carts at 888-795-2278 ext 102 or send an email to service@cricketminigolfcarts.com. Additionally, you can visit their website at https://cricketminigolfcarts.com/ to find informational videos, support documentation, and an online store for accessories and parts.
• The user manual provides detailed instructions on installation, setup, control functions, operational procedures, maintenance, and adjustments. Please refer to the specific sections of the user manual for comprehensive guidance on each aspect of using the SX3 Electric Sport Vehicle.
• Ensure that you follow the safety guidelines and precautions mentioned in the user manual at all times to prevent accidents or injuries. If you encounter any doubts or issues during operation, it is recommended to contact Cricket Mini Golf Carts for assistance.

lNFO@CRICKETMINIGOLFCARTS.COM

ELECTRIC SPORT VEHICLE OWNER’S MANUAL, SAFETY GUIDE & WARRANTY INFORMATION

Thank you for the purchase of your new SX3 Model Electric Sport Vehicle. This owner’s manual is designed to furnish you with a basic understanding of the features and operation of this vehicle. Important safety information and information about special techniques and skills needed to operate and ride your SX3 are included, as well as basic maintenance and inspection procedures and warranty information.

Cricket Mini Golf Carts reserves the express right to make design adjustments, improvements or changes without obligation to make these changes on units previously sold, and the information contained in this publication is subject to change without notice.
Cricket Mini Golf Carts is not responsible for inadvertent errors in this publication, and/or incidental and consequential damages that result from the use of the material in this publication…

Please consult Cricket Mini Golf Carts at 888-795-2278 or via email at service@cricketminigolfcarts.com if you have any questions regarding the operation or maintenance of your SX3.

For Your Safety, and The Safety of All Passengers:

• Please read this addendum and the original SX3 owner’s manual carefully and completely before operating your SX3. Make sure you understand all instructions.
• Take special notice of all warning and caution notices herein.
• Operate your SX3 vehicle only after proper training and instruction.
• No one under 16 years of age should ever operate a SX3 Electric Sport Vehicle.

NOTE: Whenever there is any doubt whatsoever about anything involved with the operation, maintenance and safe operation of your SX3 Electric Sport Vehicle, always call FREE TECHNICAL SUPPORT at
888-795-2278 ext 102 or email us at service@cricketminigolfcarts.com. You can also visit us online where you will find informational videos, support documentation and our online store for accessories and parts.
https://cricketminigolfcarts.com/

PRODUCT SPECIFICATIONS

• Model: Double-seat RX5 Electric Sport Vehicle – Four-wheel, electric powered
• Power: Single Magnet 800-watt motor
• Transmission: Direct drive through 16:1 reduction gearbox
• Speed Control: Standard accelerator pedal on the left side of floorboard
• Directional Control: Forward/Reverse switch conveniently located on main control
• Maximum Speed: Controlled from 0 to 10 mph in consideration of load and terrain
• Hill-Climbing Ability: 1:3 Gradient, no more than 10% incline or decline
• Battery Charging: Permanent on-board charging unit underneath front seat
• Frame: MIG-welded high-tensile steel with corrosion protection
• Body: Molded in polymer-reinforced plastic
• Brakes: Single regenerative electromagnetic braking
• Batteries: 3 heavy-duty glass-mat U1, 12-volt 35-amp/hour in series (36-volt system)
• Battery Charger: 10-amp, automatic cut-off when fully charged
• Tires: 13×6.50-6 tubeless – Recommended air pressure at 12-15 psi
• Turning Radius: 102”
• Overall Length: With rear passenger step plate removed – 72”; step plate installed – 78”
• Adjusted Overall Length: For storage & transport 58” (with floorboard extension removed)
• Overall Width: 32”
• Overall Height: 31” (with seat back removed, steering wheel removed and rear passenger safety bar removed)
• Load Capacity: 600 lbs
• Vehicle Curb Weight: 404 lbs

GENERAL INFORMATION

SAFETY

General Safety Information
This guide is provided to assist the owner or operator of this SX3 in the safe operation and maintenance of the vehicle. The warnings in this manual are not a replacement for good common sense and safe driving practices. Your SX3 is designed and manufactured for off-road use. It does not conform to Federal Motor Vehicle Safety Standards and is not equipped for operation on public streets. Operators of the SX3 should have a valid motor vehicle driver’s license. No one under 16 years of age should be allowed to operate a SX3.

Operating Safety

1. Always use your SX3 in a responsible manner and maintain the vehicle in safe operating condition.
2. Always read and observe all warnings and operation instruction labels affixed to the SX3 vehicle.
3. Always follow all safety rules established in the area where you are operating the SX3 vehicle.
4. Always use extreme caution when making sharp or blind turns.
5. Always release throttle gradually to control speed and stability on steep grades.
6. Do not tow the SX3 vehicle, unless following tow instructions.
7. Always use extreme caution when traveling:
   • a. In wet areas
   • b. In blind spots
   • c. Along loose terrain
   • d. On uneven roads
   • e. In traffic with other vehicles
   • f. Near pedestrian areas

Notes, Cautions and Warnings

• The following notations indicate important information. Failure to follow the warnings contained in this owner’s manual could result in serious injury or death.
• Conditions should be observed. This provides key information that makes procedures easier and clearer.
• CAUTION: CONDITIONS THAT MAY RESULT IN DAMAGE TO THE VEHICLE. SPECIAL  PRECAUTIONS MUST BE TAKEN TO AVOID DAMAGE TO THE VEHICLE.
• WARNIING: NG: HAZARDOUS CONDITIONS THAT COULD RESULT IN SEVERE INJURY OR DEATH TO THE MACHINE OPERATOR, BYSTANDER OR A PERSON INSPECTING AND/OR REPAIRING THE VEHICLE.

General Safety Practices

• WARNING Steep Grade: In areas where steep grades exist, vehicle operations should be restricted to the designated vehicle pathways wherever and whenever possible. Such potential hazards should be identified with a suitable warning giving the following information: “Warning: STEEP GRADE – Ascend or descend slowly and proceed with due caution” More than 10% is considered steep.
• WARNING Wet Areas: Wet grassy areas may cause a vehicle to lose traction and may affect stability. Wet areas should be chained or roped off to prevent access and potential accidents with injury.
• WARNING Sharp Turns, Blind Corners, Bridge Approaches: Sharp turns, blind spots, bridge approaches and other potentially hazardous areas shall be either chained or roped off to repent vehicle operations or identified with a suitable warning to the operator of the nature of the hazard and stating the proper precautions to be taken to avoid the hazard.
• WARNING Loose Terrain: Loose terrain may cause a vehicle to lose traction and may affect stability. Areas of loose terrain should be repaired if possible, or chained or roped off to prevent vehicle operation, or identified by a suitable warning to operators not to operate vehicles in this area due to lose terrain or possible hazardous conditions.
• WARNING Pedestrian Areas: Areas where pedestrians and vehicles interfere shall be avoided whenever possible by rerouting the vehicle traffic or the pedestrian traffic to eliminate the interference is not possible or is highly impractical, signs should be erected warning pedestrian traffic and to drive slowly and use extreme caution.
• CAUTION Ventilation: Never charge a vehicle in an area that is subject to flame or spark. Pay particular attention to natural gas or propane gas water heaters and furnaces.

Safety
On steep hills it is possible for vehicles to coast at greater than normal speeds encountered on a flat surface. To prevent loss of vehicle control and possible serious injury, speeds should be limited to no more than the
maximum speed on level ground. Limit speed by reducing or eliminating pressure on the accelerator pedal, which engages the automatic brake function.
Catastrophic damage to the drive train components due to excessive speed may result from driving the vehicle above specified speed. Damage caused by excessive speed may cause a loss of vehicle control and is costly. This is considered abuse and will not be covered under warranty.
If the vehicle is to be used in a commercial environment, signs should be used to warn of situations that could result in an unsafe coasting condition.
Keep this manual as part of the permanent service record in case the vehicle should be resold.
Your SX3 vehicle is intended for off-road use only. The owner should check local and other applicable laws and regulations before operating.

WARNING SEVERE INJURY OR DEATH can result if you do not follow these instructions:

• Read this entire manual carefully and follow the operating procedures described.

• Operate a SX3 only if you have had proper training or instruction.

• Follow these age recommendations:

  • No one under 16 years of age should operate a SX3 or be left without adult supervision.

• Be wary of the safety of passengers and pedestrians.

• Do not operate a SX3 vehicle on a highway.

• Do not consume alcohol or drugs before, or while operating, this machine.

• Never operate at speeds too fast for your skills or the outdoor conditions. Always operate at a speed that is suitable for the terrain, visibility and operating conditions, and your experience.

• Never attempt wheelies, jumps or other stunts.

• Inspect your vehicle every time it is used to make sure it is in safe operating condition. Follow the inspection and maintenance procedures and schedules described in this manual.

• Always keep both hands on the steering wheel during operation.

• Always drive at slower speed and be cautious when operating on unfamiliar terrain. Be alert to changing terrain conditions always when operating a SX3 vehicle.

• Do not operate your vehicle on excessively rough, slippery or loose terrain until you have learned and practiced the skills necessary to control the vehicle on such terrain. Be especially cautious of these kinds of terrain.

• Always follow proper procedures for turning as described in this manual. Practice turning at low speeds before attempting to turn at faster speeds. Do not turn at excessive speeds.

• Do not operate the vehicle on hills too steep for the vehicle or for your ability. Practice on smaller hills before attempting larger ones.

• Always follow safe procedures for climbing hills. Check the terrain carefully before you start up any hill. Never climb hills with excessively slippery or loose surfaces. Shift your weight forward. Never press down on the
  accelerator suddenly. Never go over the top of a hill at high speed.

• Always follow safe procedures for going down hills and for braking on hills. Check the terrain carefully before you start down any hill. Shift your weight backward. Never go down a hill at high speed. Avoid going down a hill at an angle that could cause the vehicle to lean sharply to one side. Go straight down the hill wherever possible.

• Allow follow proper procedures for crossing the side of a hill as described in this manual. Avoid hills with excessively slippery or loose surfaces. Shift your weight to the uphill side of the vehicle.. Never attempt to turn the vehicle around on any hill until you have mastered the turning technique on level ground. Avoid crossing the side of a steep hill if possible.

• Use proper procedures if you stall or roll backwards when climbing a hill. To avoid stalling, use proper gear and maintain a steady speed when climbing a hill. If you stall or roll backwards, follow the special procedure for braking. Dismount on the uphill side or to a side if pointed straight uphill. Turn the vehicle around and remount.

• Always check for obstacles before operating in a new area.

• Never attempt to operate over large obstacles, such as large rocks or fallen trees.

• Be careful when skidding or sliding. Learn to safely control skidding or sliding by practicing at low speeds and on level, smooth terrain. On extremely slippery surfaces, such as ice, go slowly and be very cautious in order to reduce the chance of skidding or sliding out of control.

• Never operate a SX3 in fast-flowing water or excessively deep waters. Contact with water may affect the batteries and may reduce stopping ability. Test your stopping ability after leaving water by removing pressure from accelerator pedal rapidly several times in a row.

• Always use the size and type tires specified in this manual.

• Always maintain proper tire pressure as described in this manual.

• Never modify a SX3 vehicle through improper installation or use of accessories.

• Never exceed the stated load capacity for a vehicle. Cargo should be properly distributed and securely attached. Reduce speed and follow sound procedures for carrying cargo or pulling a trailer. Allow greater distance for braking.

INSTALLATION & SETUP INSTRUCTIONS

Once you have safely and completely removed your vehicle from its shipping crate, you are ready to perform the basic installation and set-up procedures prior to the initial operation of your new SX3.

1. Unpack the SX3 Vehicle
   Remove all packing material including the rear step plate and the front seat from the SX3.
   Set these items aside until needed.

2. Install the Steering Shaft
   Make sure the steering wheel is in the correct orientation for driving straight and the front wheels are pointing straight. Line up the spline on the lower shaft with the upper shaft and slide the two shafts together. Then tighten the large nut on the upper shaft until tight.

3. Install the Floorboard Extension

   • Use your hand to pull up on the spring-loaded T-lever in the center of the rail. Turn the lever clockwise until it locks open.
   • Gently pull or push the vehicle chassis front end forward until it stops. Then lift and turn the T-lever counterclockwise and lock the chassis into position. You might need to slightly adjust the two chassis once the T-lever is lowered for it to “click” into lock. Check to make sure the lever is locked.
   • Remove the floorboard knobs from both sides of the chassis, located just under the front seat of the frame.
   • Slide the floorboard extension into position by angling it in toward the front of the SX3. Check that the key is in the “OFF” position and you may need to depress the throttle pedal slightly to get the floorboard to clear.
   • Slide the floorboard extension underneath the stainless-steel flash plate of the permanent floorboard assembly.
   • Make sure both sides of the floorboard extension are lined up and securely fitted underneath the front stainless-steel flash plate and into the black plastic tabs on the front body.
   • Install but do not tighten one of the floorboard knobs located on the chassis under the front seat, then install the second knob. You may need to slightly move the floorboard in order to line up with the threaded holes forthe knobs. Once both knobs are installed, tighten them down to secure the floorboard in place.

4. Install Front Seat Back Rest
   • Gently guide both seat back support arms into the metal slots located behind the front seat. Install the small knobs into the threaded inserts on the rear of the metal slots to secure the seat back.

5. Install Rear Passenger Step Plate

   • Loosen both locking nuts located below the back seat and carrier rack.
   • Connect grab rail to the step plate using the included 4 bolts, washers and nuts from in the bag under your seat, next to the charger.
   •  Insert both step plate bars into the rear chassis frame tubes. Check that the step plate bars are all the way in and that the knobs are tightened securely.

CONTROL FUNCTIONS

Key Switch Functions:

• ON: One click of key clockwise activates power and makes engine ready for operation.
• OFF: With the key in the OFF position, all electrical circuits are switched off. The key may now be removed.

Charge Meter:
“I” signifies full charge; “0” signifies no charge

Directional Toggle Switch:
Up (F) for Forward; Down (R) for Reverse

Rheostat Speed Control:
Use this knob to adjust the maximum speed of the cart. Turn clockwise for full speed and turn counterclockwise to limit the maximum speed.

Turn Signal/Head Lights:
The turn signals are activated with the left and right arrows on the dash. To turn on the headlights, press the red button on the dash.

Horn:
The horn is the green button on the dash panel. Depress in to honk the horn.

Freewheel Electronic Switch:
The key must be in the “on” position. It is located under the front seat. Use this switch to disengage the brake and all electronics. Under normal operation, this switch must be in the “off ” position. When this switch is in the “on” position, the SX3 will not drive. Also, brake lever in rear of the cart must be pulled out to put in full freewheel.

ENTERING THE VEHICLE:
All passengers (including driver) must always be seated while the SX3 vehicle is in use.

TURNING THE VEHICLE ON:
Switch the key switch to the “ON” position and select the desired direction (Forward or Reverse).

DRIVING THE VEHICLE:
After making the desired directional selection, depress the floorboard-mounted accelerator pedal with your right foot to engage the vehicle’s power train. Always be aware of surrounding terrain and use caution. Judge speed accordingly. Be cautious when encountering loose or wet terrain. Do not attempt steep grades.

STOPPING THE VEHICLE:
Slow down by gradually lifting your right foot off the accelerator pedal and automatically stopping the vehicle, switch the key to the OFF position.

TURNING THE VEHICLE OFF:
After taking your right foot completely from the accelerator pedal and automatically stopping the vehicle, switch the key to the OFF position.

EXITING THE VEHICLE:
Once the vehicle has come to a complete stop, and the key switch is turned to the OFF position, all passengers may carefully exit the vehicle. Never attempt to exit the vehicle while it is still moving. This could lead to severe injury.

STORING THE VEHICLE:
Store your SX3 vehicle with the key switch in the OFF position. Do not store vehicle more than one day without the battery charger plugged in. The charger must be left plugged in when vehicle is not in use.

RIDING THE VEHICLE:
Ride with Care and Good Judgement. Get Training If You Are Inexperienced.
This SX3 vehicle should only be used by experienced operators. This vehicle requires special skills
obtained through practice. Take your time to fully learn techniques before attempting more difficult maneuvers.
You should familiarize yourself with the operation of the vehicle to obtain the skill necessary to enjoy riding safely. Be sure you have read this entire guide and understand the operation of the controls before you begin to ride. Pay particular attention to the safety information.
Beginners should become familiar with this vehicle at slow speeds first, even if you are an experienced operator. Do not attempt to operate at maximum performance until you are totally familiar with the vehicle’s handling and performance characteristics.

WARNING: Passenger and Driver Safety – During Operation
Always keep your feet inside the vehicle during operation. Otherwise, your feet may contact the rear wheels. Removing even one hand or foot can reduce your ability to control the vehicle or could cause you to lose your balance and fall out of the vehicle. If you remove a foot from inside the vehicle, your foot or leg may come into contact with the rear wheels or objects outside the vehicle. Always keep both hands on the steering wheel and both feet inside the vehicle during operation.

OPERATIONAL INSTRUCTIONS, MAINTENANCE AND ADJUSTMENTS

TIRES AND TIRE AIR PRESSURE:

• Operating this vehicle with improper tires, or with improper or uneven tire pressure, may cause loss of control, thereby increasing your risk of an accident.
• Always use the size and type tires specified in this manual for this vehicle.
• Always maintain proper 12-15PSI tire pressure as described in this manual, adjusting periodically for conditions, load and terrain.
• Check tire pressure and adjust accordingly by removing cap from valve stem, just as with any pneumatic tires. Always replace valve stem after each tire pressure check operation.

CHARGING THE BATTERIES:

1. Simply raise the hinged front seat with the convenient lift strap for easy access to the on-board permanent charging system.
2. Insert the plug (it will fit only in one direction) attached to the battery- charging unit into any convenient 110-volt electrical outlet.
3. Charge light turns GREEN when SX3 is fully charged, and the unit cuts off automatically. It will float and top off as needed when left plugged in, as required.

ADJUSTING THE FREE-WHEEL LEVER:

1. The free-wheel lever is conveniently located just underneath the left rear of your SX3.
2. Pull the free-wheel lever toward rear of the vehicle “out-of-gear” position for free-wheeling operation; when you hear the “click”, you’ve engaged the free-wheeling function (This makes pushing, rolling, and/or loading the vehicle much easier).
3. Re member to push the free-wheel lever back in, toward the front of the vehicle prior to normal operation. (Listen for another “click” to indicate you have returned to regular driving configuration.)

REPLACING YOUR SX3 BATTERIES:
NOTE: Batteries are hermetically sealed and require NO MAINTENANCE for the life of the battery. No acid. No acid odor. No leakage.

1. To remove battery cover, unhinge the two latches at the front of the battery compartment (beneath the front portion of the seat) and slowly, carefully slide the cover forward to reveal both batteries. Sometimes it’s easier to remove the floorplate first to easier access the battery cover.
2. Use 13mm wrench or pliers to turn bolts counterclockwise to loosen and remove batteries with built-in, convenient plastic handles. Use caution not to “short” the batteries with the wrench when disconnecting or connecting the battery terminal leads.
3. See battery diagram shown here, or download from our website, to make sure batteries are hooked up and connected properly. Install batteries as shown.
4. Reverse procedure in Step 1 to replace and secure battery cover after install.

ADJUSTING CHASSIS RIGIDITY FOR HEAVY LOADS OR ROUGH TERRAIN:

Your fully assembled SX3 is delivered with the chassis secured in a safe, yet somewhat flexible chassis configuration — basically perfect for normal, everyday operating conditions. If you should need to haul a heavier payload (up to 600lbs maximum) or drive your SX3 over moderately rough terrain, you may elect to tighten the two under-chassis frame bolts (shown here) to provide a more rigid, firmer ride.

1. Use a 17mm (or adjustable) wrench to turn nuts on both bolts clockwise until they fit snugly — but not too tightly.
2. To return chassis rigidity to normal operating configuration and before collapsing vehicle, simply turn the nuts on both bolts counterclockwise until both return to their original position on the bolt.

References

• Cricket Mini Cart | Cricket Carts Dealer | 5YR Warranty

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>