ADDFUN AT133 13.3 Inch Smart Android Car TV User Manual

36G+326
13.3″ Smart Android Car TV
User Manual MODEL NO: AT133

Thank you for purchasing our product! This manual provides some important information to help you operate our Android Car TV safely. Before using this product, please read this user manual carefully. If you have any problems with the product or missing accessories, please don’t hesitate to email us: us- cartv-133@eitack.com our customer service staff is online 7/12 hours to provide you with the best solution.

FCC WARNING STATEMENT

FCC Cautior:
This device compies with part 16 of the FCC Rues. Operation is subject to the fonowing two condition: (u): This device may not cause harmfu interference, and (2) this device must accept any interference received, incuding interference that may cause undesired operation.
Any changes or modifications not sxprssswprwsd by the party responsiie for compiiance cound void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to compwy with theimits for a Ciass B digitan device, pursuant to Part 15 of the FCC Runes. These iimits are designed to provide reasonabe Pprotection against harmfu interference in a residentian instanation. This equipment generates, uses and can radiate radio frequency energy and, if not instaned and used in accordance with the instructions, may cause harmfu interference to radio communications. However, there is no quumntse that interference win not occur in a particunar instanation.
if this equipment does cause harmfun interference to radio or tewvision reception, which can be determined by turning the wipment off and on, the user is encouraged to try to correct the interference by one or more of the fonowing measures:
Reorient or reocate the receiving antenna.
increase the separation between the equipment and receiver.
– Connect the equipment into an outet on a circuit different om that to which the receiver is connected.
—- Consunt the deaer or an experienced radio/TV technician for hexp.
The device has been evawuated to meet genera RF exposure requirement. The device can be used in portabwe exposure condition without restriction
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be instaled and operated with minimum distance between 26mm the radiator your body: Use only the supplied antenna.

PACKAGE LIST

[Tip] Please check the product package carefully, if any accessories are missing, please contact our after-sales customer service by email for replacement.

INSTALLATION STEPS

step I: Pull up the button A on the back of the display (As in Figure 1). Insert the small bracket into the depression at the bottom of the back, push the small bracket to a suitable position and release the button to fix the position (As in Figure 2).

Step 2: Press the B and C buttons on both sides of the big bracket to open both ends of the bracket (As in Figure 1). Choose the plastic buckle that fits your car’s headrest and install it to the inner side of the big bracket (applicable diameters are 10.2,11.2,12.2,12.9,14, 16mm) (AsinFigure 2).

Step 3: According to the distance between the two rods of your car’s headrest, press both ends of the large bracket and fix it to the car’s headrest.

Step 4: Insert the display screen into the hole of the big bracket on the headrest, and push the switch to the locked position to complete the installation.
[Note] There are unlocking and locking on the long stand. In order to protect the safety of the display screen, lock it in time after installation.

BASIC OPERATION

1. Port Description

Power: When short press, sleep/wake/power on; when long press, power off.
(Long press 2-3 seconds)
HDMI Out: Output content to other devices for display. Such as projectors, monitors and other equipment.
HDMIIn: Can be connected with PS4/PS5/computer and other equipment.
USB Port: USB flash drive can be inserted for playback.
Headphone Jack: 3.5mm headphones can be plugged in.
DCInterface: Plugin the 12V DC adapter to sLpply power to the display.
Reset: Restarts the device. When the machine freezes or freezes, please press this function to restart the device.
Main interface function introduction

1. Return to the previous step.
2. Back to Home page.
3. View or close interfaces running in the background.
4. Adjust the brightness of the display and the volume of the sound. When “MORE’is selected, the ambient light can be adjusted and the FM transmit can be turned on.
5. Hide the icons in the lower bar. If you need to show it again, leave your finger at the bottom of the main screen and swipe up a bit to restore it.
6. Time: Enter through “Settings’ > ‘Information’ > “ZGNE” to set the time.
7. Video: Play local video or video from U disk. Support 4k video.
8. Musie: Play local music or U disk music.
9. HDMIIN: Connection with other devices can be established via HDMI cable.
10. Settings: Settings applied to each function
11. Phone Link: Wireless projection between display screen and mobile device.
12. Apps: Freely check 4 apps to be displayed on the homepage.

SETTINGS

1. WiFi
   1. Via WLAN (router)-Turn on WiFi and connect WiFi.
   2. Share hotspots via cellular data.

2. Bluetooth
   A Turn on Bluetooth and connect your Bluetooth device. Such as headphones or Sound Bars [Note] If when you don’t need to use wifi or bluetooth, it is recommended that you choose to turn them off.

3. APP Link
   APPLINK is a function that allows you to control this Android Car TV wirelessly from your cell phone. (Extends your phone as a remote control)
   How to establish a connection between an Android car TV and a mobile device? [Tips] Mycar Link app can be downloaded from Apple Appstore [ Google Play Store. When connecting, please ensure that the Android Car TV and the mobile device are on the same network to establish a connection.

Display/Volume

By pressing the to control the brightness and volume respectively.

System

language
Switch and set the language of different countries.
wallpaper
Switch settings 14 wallpapers
Bootlogo
* Press “OK” to enter. Click the ‘@’ button to add an exclusive car brand logo to your car as the boot interface of the Android phone. The resolution of the car logo image is 19201080p
**Boot Mode

1. Power on mode: After powering up, turn on automatically.
2. standby mode: After powering up, you need to manually press the power button to turn it on.

**** open display mode

1. Enter the main interface: After powering on, the main interface is displayed
2. Enter HDMI input: After powering on, the HDMI interface is displayed.

Equaliser

**** There are 5 different music styles to choose from.

[IMPORTANT NOTE ] When the equalizer is turned or, it affects the sound to become smaller. Therefore, itis recommended that you tumn off the equalizer in time when you do not need to use it

Information

Check for Update
Click “Check for Updates” to check whether the software is the Iatest version.
****Factory Reset
Click “Restore Factory Settings” to restore the system to the factory default settings.

[INFORMATION] The factory reset process will take 2-3 minutes. Do not power off the system during factory reset in progress.
When Android car TV are connected to a Wi-fi, the monitors will be able to receive software updates if software update is available. The system will require periodic updates which are managed through “over-the-air

• software updates, an “Update Available’ message will appear on the home screen of the monitors.

PHONE LINK

**** Phone Link is an application that can synchronize the display of mobile phone content to android car V.

1. Mirroring Function with Android Phones OS software version has to be minimum 6.0 onwards.
2. iPhone Mirroring/Airplay OS is compatible i0S 10 version and above.
3. Operation will vary depending on the Android device and software version of the Android OS
4. compatibility with all Android devices is not guaranteed

How to connect iOS devices?

How to connect an Android device?

[Note] Operations will vary depending on the Android device and the software version of the Android OS.

APPS

**** Apps “add an app here” can add 4 commonly used APPs and display them on the homepage, making it more convenient to use.

1. Click “ “, check the APP you need to display, and click “ok’ to complete.
2. If you want to enter the selection interface again, press and hold the icon in the current APP column to enter the selection interface and select other APPs.

MUSIC

**** Music Mode Window Components

1. Play Mode: Can be switched to sequence/repeat/random
2. Previous: Select the previous track.
3. Play: Play/pause track.
4. Next: Select the next track.
5. Song List: You can choose to play other sorgs.
6. File List: Select a music file from the file list.

VIDEO

1. File List: Select a video file from the file list.
2. Aspect Ratio: You can choose to switch the aspect ratio of the video to 16:9 or 4:3.
3. Previous: Select the previous video,
4. Play/Pause: play or pause the video.
5. Next: select the next video.
6. Video List: You can choose to play other videos.

**** swipe up and down on the left side of the screen to adjust the brightness of the video.
Swipe up or down on the right side of the screen to adjust the volume of the video.

PHOTO

**** Photo Mode Window Components

1. File list button: select a photo file from the file list.
2. Aspect Ratio: You can choose to switch the aspect ratio of the photo to 16:9 or 4:3.
3. Settings: You can set the slide show time (3s/6s/9s/12s).
4. Photo list: You can choose to play other photo.
5. To view the previous photo, manually swipe to the right of the screen.
6. To view the next photo, manually swipe to the left of the screen.

MOOD LIGHTING

*** Press” ” on the main menu to enter the setting. Open the path: “

Click ‘more’.

1. FM: Turn on/off FM, can tune frequency.
2. Light: Adjust the brightness of the LED light.
3. Brightness: adjust the brightness of the screen.
4. Volume: Adjust the volume of sound
5. Mode lighting: you can switch to auto change mode and adjust the light color.

PRODUCT SPECIFICATION

XMF,MXMF,RTTTL,RTX,OTA,IMY,
Supported Video Formats| DAT,MPG,VOB,MPEG,AVI,MKV,MP4,MOV, 3GP,TS,FLV,WEBM,WMV, ASF
Software Attributes| Perating System: Android 11.0
Support Android/iPhone wireless Miracast
Product Size| 12.20418.674118inch
Product Weight| 2.301b

PRECAUTIONS

– Screen Protection
To protect the display from damage, do not use a ballpoint pen or similar tool with a sharp point to manipulate the display.
– Clean and Wipe
When cleaning the touch screen, turn off the display first, and then wipe it with a soft cleaning cloth. Do not use cloths made of hard, chemical or oily materials (alcohol, benzene, etc.), which may damage or distort the surface of the screen.
– Troubleshooting
Do not disassemble or repair the system if there is any malfunction with the display or if there is any doubt about its use. Please contact our after- sales staff directly, we will help you at any time.
– Warm Reminder for Outdoor Use
If the vehicle is parked in a very cold or very hot place, you may see a black screen with distorted images.
When the temperature of the unit returns to the normal operating range, the system will return to normal. This may take over an hour, depending on the temperature.
– About the screen When the screen is at rest or no operation, it will go to sleep and consume less power.

3G+32G
13.3″ Smart Android Car TV
User Manual
us-cartv-133@eitack.com

Documents / Resources

| ADDFUN AT133 13.3 Inch Smart Android Car TV [pdf] User Manual
2ATFT-AT133, 2ATFTAT133, AT133, AT133 13.3 Inch Smart Android Car TV, 13.3 Inch Smart Android Car TV, Smart Android Car TV, Android Car TV, Car TV, TV
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>