Alovon V8 Wireless Microphone User Manual

Alovon V8 Wireless Microphone

Introduction

• Thanks for choosing our product!
• This product is a smart wireless microphone, including transmitter and receiver (See as below picture)
• Plug and play, no app required.
• Multiple uses: Online live broadcast, video, vlog shooting, program interview,recording, video teaching and more.
• If you encounter any problems, please contact us and we will help you solve it as soon as possible!

ID illustration

1. Built-in microphone
2. Switch key
3. Indicator light
4. Lavalier
5. Charge/Monitor port
6. Noise reduction key
7. Reverb key
8. Volume adjust key
9. Charge/Audio output port
10. 3.5mm audio output

• Pause: short press switch key 2 of microphone once to pause the radio, short press again to resume radio
• Noise reduction: (default on) short press noise reduction key to turn off/on
• Reverb: (default off) short press reverb key once to turn on off
• Monitor: Insert earphones into port © 0for monitoring

How to use

1. Long Press switch key of microphone and receiver (automatic pairing), the indicator light turns on (no longer flashing), pairs are successful

Note:

  * Only the left indicator light will be on, the right indicator light will not be on. This is normal, the right light is just for aesthetic
  * Microphone and receiver both need to be charged(with 5V/1A charger, Type-C cable)
  * Turn off Bluetooth or disconnect phone from Bluetooth/earphones before connecting to the receiver

2. Connect the receiver to your device

Compatibility problems:
iPhone: Upgrade your phone to the latest version If the device does not match, please exit all open programsand restart the device

Android phones

1. Compatible with most Android phones
2. Some phones need to open the OTG function, search for [OTG] or [USB] in the settings to open it, or search for a solution according to your phone model on Google
3. Some phones do not support external microphone due to system reasons, you can download [Open Camera] software, [Settings]- [Video Settings] – [Audio Source] – [External Microphone]

INDICATOR LIGHT

CAUTION

• No connection for more than 3 minutes, transmitter/receiver shutdown automatically
• The microphone is only for recording, not a speaker, can not amplity the sound
• 8 Volume adjust key only high volume / low volume two options, the default high volume, short press to switch,can be used when connecting to an amplifier for analog audio output, but there is no amplification or reduction for microphone recording.
• Keep the microphone at least 18 cm/7 inches away from the sound source to avoid popping sound
• Keep away from noise sources (e.g. fans, air conditioners, refrigerators, clothes rubbing)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>