acer NSK211 Nitro Gaming Soundbar User Guide

acer NSK211 Nitro Gaming Soundbar User Guide

Please read all instructions before use for the best performance of this product. Save these instructions for future reference.

Quick start guide

Please read all instructions before use for the best performance of this product. Save these instructions for future reference.

Box Contents

• Sound Bar

• Quick Start

• 3.5mm to 3.5mm audio cable

• USB-C to USB-C cable

• USB-A to USB-C cable

LED Indicators and Button Control

 Computer
Bluetooth
AUX

LED Light
Fixed color light, gradient color light (Red -> Green -> Blue -> Yellow -> Purple )

Front / Right side of Soundbar

1. Select the source input mode. Press the button ” ” to select input sources: Computer - > Bluetooth -> AUX)

2. Sound effects (Press the button ” ” to select different sound mode: Music -> Movie – > Game)

3. LED light button control (Red -> Green -> Blue -> Yellow -> Purple -> Five color gradient lamp)

4. Power switch / volume control

5. Headphone jack
   Back / Right side of Soundbar
   
   

6. AUX input jack

7. USB Type-C in (DC 5V) / Computer input jack

Connection Diagram

Bluetooth signal up to 30 feet

Connecting a bluetooth device

a. Press the “ ” button on the right side of Sound Bar, the LED indicator blinks blue.
b. Turn on Bluetooth on the Bluetooth device.
c. Select “NSK211” and connect it. When your Bluetooth device is connected, the LED indicator blinks blue slowly.
d. Play music files from the device, connected via Bluetooth, through the Soundbar

Specifications

Computer: 700±50mV
Bluetooth: R/L: 700±50mFFS
Frequency response:| 80HZ-18KHZ
Full range speaker:| 2 inch (52mm)
Product dimension:| 417.17.5 cm
Product weight:| 850g

Troubleshooting

If you have a problem with your Soundbar, there is a quick simple solution, first make sure:

• The cables between Soundbar and input devices are securely connected.
• The LED indicator is lighting in the front of the Soundbar.

No sound or crackling noise:

• Check if all cables are connected properly.
• Adjust Volume+ on top of your Soundbar.
• Make sure you have selected the right input source, and the LED is lighting accordingly.
• If using Bluetooth, check if the sound on your device is under minimum volume.
• When using cable connection, make sure your device has audio output port (not input).

I hear buzzing or humming:

• Ensure all cables and wires are securely connected.
• Connect a different source device to see if the buzzing persists. If it does not, the problem maybe with the original device.
• Connect your device to a different input on the Soundbar

Bluetooth can’t be connected:

• Check if the Soundbar is connected with the third Bluetooth device.
• Be sure that there are no solid obstructions betrween the Soundbar and source device. (Within 30 feet)
• Reboot the Bluetooth and connect again.

Have any other questions?
Please contact with your retailer for assistance

Warning/Caution

• Keep away from water.
• Please don’t use alcohol to clean.
• Please ensure all connections are secure before use.
• Keep away from direct sunlight.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
  

• Increase the separation between the equipment and receiver.
  

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  

• Consult the dealer or an experience radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>