SAFAVIEH LIGHTING CHA4034 Floor Lamps Instruction Manual

SAFAVIEH LIGHTING CHA4034 Floor Lamps

Product Information

• Model Number: CHA4034
• Product Dimensions: 31.75L X 16.25W X 22-94H

Care and Maintenance
Notice & Important Safety Instructions:

• Please make sure that you have all parts indicated before you begin assembly of this item.
• This item should be assembled on a soft surface to prevent scratching the finish during assembly.
• To reduce the risk of fire, electrical shock, or injury to persons or property, please follow the guideline below for safe use and installation.
• The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.

Part List and Hardware List
Part List:

• Mounting Bracket (C)
• Canopy (G)
• Closable Link (J)
• Loop (K)
• Lamp Body (M)
• Anchor Screw (A)
• Mounting Screws (D)
• Tapping Screws (E)
• Bulbs (L) – 4 pieces of LED 4-Watt bulbs included in the box

Product Usage Instructions

Preparation

• Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product.
• Estimated Assembly Time: 20 minutes.
• If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com.

Step 1: Unpack and Separate
Unpack all parts from cartons carefully. Turn the Canopy Nut (H) counterclockwise to separate the Mounting Bracket (C) and Canopy (G).
Connect the Closable Link (J) to the lifting ring of the Canopy (G).

Step 2: Fix the Loop
Turn the Loop (K) counterclockwise to fix it on the Lamp Body (M). Connect the Closable Link (J) to the lifting ring of the Loop (K).

Step 3: Wire Connection
Connect fixture neutral wire (ribbed) to the outlet box neutral wire (usually white) using a wire nut.
Connect fixture hot wire (smooth with markings) to the outlet box hot wire (usually black) using a wire nut.

CAUTION: Do not reverse the hot and neutral connections.

Grounding Instructions:

• Wrap ground wire from outlet box around green ground screw on Mounting Bracket (C), no less than 2 inches from wire end. Tighten ground screw.
• If the fixture is supplied with a ground wire, connect it to the outlet ground wire with a wire connector.

Step 4: Fix the Mounting Bracket
Fix the Anchor Screw (A) to the ceiling and the Mounting Bracket (C) to the junction box through Mounting Screws (D) and Tapping Screws (E).

Step 5: Attach the Canopy
Attach the Canopy (G) to the junction box and fix it by turning the Canopy Nut (H) clockwise.

Step 6: Insert the Bulbs
Insert the bulbs (L) into the sockets.

WARNING

• WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN **
• Switch off the main electrical supply from the main fuse box / circuit breaker before installation.
• Inspect item carefully before attempting to install.
• If there is any damages or obvious defects, do not install.
• Item may not be returned once it has been installed.

CARE AND MAINTENANCE

• To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
• To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
• Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

NOTICE & IMPORTANT SAFETY INSTRUCTIONS

• Please make sure that you have all parts indicated before you begin assembly of this item
• This item should be assembled on a soft surface to prevent scratching the finish during assembly
• To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
• The external flexible cable or cord of this lamp cannot be replaced

If the cord is damaged, the lamp shall be destroyed

Part List and Hardware List

PREPARATION

• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
• If any part is missing or damaged, do not attempt to assemble the product.
• Estimated Assembly Time: 20 minutes.
• If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com

PLEASE USE TYPE”A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATTTHERE ARE 4PCS LED 4-WATT BULB IN THE BOX

Assembly

• Step 1: Unpack all parts from cartons carefully. Turn the Canopy Nut (H) counterclockwise to separate the Mounting Bracket (C) and Canopy (G). Connect the Closable Link (J) to the lifting ring of the Canopy (G)
  

• Step 2: Turn the Loop (K) counterclockwise to fix it on the Lamp Body (M). Connect the closable Link(J) to the lifting ring of the Loop (K)

• Step 3: Wire connection
  **Connect fixture neutral wire (ribbed) to the outlet box neutral wire (usually white) using a wire nut. Connect fixture hot wire (smooth with markings) to the outlet box hot wire (usually black) using a wire nut.
  CAUTION: Do not reverse the hot and neutral connections
  Grounding Instructions:**
  Wrap ground wire from outlet box around green ground screw on mounting Bracket (C), no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

  ---

• Step 4: Fix the Anchor Screw(A) to the ceiling and the Mounting Bracket (C) to the junction box through Mounting Screws (D) and Tapping Screws (E)

  ---

• Step 5: Attach the Canopy(G) to the junction box and fix it by turning the Canopy Nut(H) clockwise.

  ---

• Step 6: Insert the bulbs (L) into the Sockets
  

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>