SAFAVIEH LIGHTING FLL4089A Portable Lamp Instruction Manual
- June 13, 2024
- SAFAVIEH LIGHTING
Table of Contents
SAFAVIEH LIGHTING FLL4089A Portable Lamp
Product Information
This portable lamp is equipped with a polarized plug, which has one blade wider than the other for safety purposes. The plug is designed to fit into a polarized outlet in only one way. If the plug does not fit fully into the outlet, you can try reversing the plug. If it still doesn’t fit, it is recommended to contact a qualified electrician. It is important to never use this lamp with an extension cord unless the plug can be fully inserted. Do not attempt to bypass or disable the polarized plug as it is a safety feature.
For care and maintenance, always unplug the lamp before using any cleaning solutions. Dust the lampshades with a feather duster or an appropriate vacuum brush attachment. Use a soft, dry cloth to wipe the lamp bases, using cleaning methods suitable for the material. Avoid using chemicals and household cleaners as they may cause damage to the finish.
The lamp consists of several parts, including the lamp base (A), lamp body (B1, B2, B3, B4), shade (D), socket (C), socket ring (E), and bulb (F). The product dimensions are 11 inches in length, 11 inches in width, and 70 inches in height.
When assembling the product, ensure that all parts are present by comparing them with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. The estimated assembly time is approximately 15 minutes. If you encounter any difficulties during assembly, our friendly Customer Care team is available to assist you.
Note: This lamp requires an on/off type A bulb with a maximum wattage of 60 watts or an LED bulb with a maximum wattage of 9 watts. There is an LED 4-watt bulb included in the box.
Product Usage Instructions
- Screw the socket (C) onto the lamp body (B4).
- Put the shade (D) on the socket (C) and tighten the lamp body (B4) onto the lamp body (B3).
- Screw the lamp body (B3) onto the socket ring (E).
- Insert the bulb (F) into the socket on the lamp body (B2).
- Screw the lamp body (B2) onto the lamp body (C).
- Screw the lamp body (B1) onto the lamp base (A). Be careful not to twist the power cord and tighten securely.
- Put the lamp on a level surface to check if everything is stable.
Ensure that you use the appropriate type of bulb as specified in the note section. Following these steps will allow you to assemble and use the portable lamp effectively.
Model# FLL4089A
Product Dimensions: 11″L X 11″W X 70″H
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock. this plug will fit in a
polarized outlet only one way. if the plug does not fit fully in the outlet,
reverse the plug, if it still does not fit, contact a qualified electrician.
Never use with an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
- If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 15 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX
- Step 1: Screw the Socket (C) onto the Lamp body(B4). Screw the Lamp body (B4) onto the Lamp body(B3). Screw the Lamp body (B3) onto the Lamp body(B2). Screw the Lamp body (B2) onto the Lamp body(B1). Screw the Lamp body (B1) onto the Lamp base(A). Be careful not to twist the power cord and tighten securely.
- Step2: Put the shade (D) on the socket (C),then tighten the Socket ring (E). Insert the bulb (F) into the socket (C).
- Step3: Put the light on a level surface to check if everything is stable.
