SAFAVIEH LIGHTING FLL4088A Portable Lamp Instruction Manual
- October 31, 2023
- SAFAVIEH LIGHTING
Table of Contents
SAFAVIEH LIGHTING FLL4088A Portable Lamp
Product Information
This product is a portable lamp with a polarized plug, designed to reduce the risk of electric shock. The lamp base is made of [material], and the shade is made of [material]. The lamp dimensions are 17 inches in length, 11 inches in width, and 61.5 inches in height. The model number of this lamp is FLL4088A.
The lamp requires an on/off type A bulb with a maximum wattage of 100 watts or an LED bulb with a maximum wattage of 12 watts. The package includes an LED bulb with a wattage of 9 watts.
Product Usage Instructions
- Before assembly, ensure that all parts are present. Check the package contents list and hardware contents list to confirm.
- If any part is missing or damaged, do not attempt to assemble the product. Contact our Customer Care team for assistance.
- Estimated assembly time is approximately 6 minutes.
- To begin assembly, follow these steps:
Step 1: Lamp Body Assembly
- Screw the Lamp body (B4) onto the Lamp body (B3).
- Screw the Lamp body (B3) onto the Lamp body (B2).
- Screw the Lamp body (B2) onto the Lamp body (B1).
- Screw the Lamp body (B1) onto the Lamp base (A). Ensure that the power cord is not twisted and tighten securely.
Step 2: Shade and Bulb Installation
- Put the shade (D) onto the socket (C).
- Tighten the Socket ring (E) to secure the shade.
- Insert the bulb (F) into the socket (C).
Step 3: Stability Check
Place the lamp on a level surface and ensure that all components are
stable.
Model# FLL4088A
Product Dimensions: 17″L X 11″W X 61.5″H
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock. this plug will fit in a
polarized outlet only one way. if the plug does not fit fully in the outlet,
reverse the plug, if it still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
CARE AND MAINTENANCE
- Unplug lamps before using any cleaning solutions.
- Dust shades with a feather duster or with an appropriate vacuum brush attachment.
- Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
- Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guidelines below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
- If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PREPARATION
- Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 6 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help.
NOTE : PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR LED BULB MAX 12-WATT, THERE IS AN LED 9-WATT BULB IN THE BOX
INSTRUCTIONS
- Step 1 : Screw the Lamp body (B4) onto the Lamp body(B3), Screw the Lamp body (B3) onto the Lamp body(B2), Screw the Lamp body (B2) onto the Lamp body(B1), Screw the Lamp body (B1) onto the Lamp base(A). Be careful not to twist the power cord and tighten it securely
- Step 2: Put the shade (D) on the socket (C), then tighten the Socket ring (E) . Insert the bulb (F) into the socket (C).
- Step 3: Put the light on a level surface to check if everything is stable.
Please email customersupport@safavieh.com