SAFAVIEH LIGHTING LITS4292A Portable Lamp Instruction Manual
- October 31, 2023
- SAFAVIEH LIGHTING
Table of Contents
SAFAVIEH LIGHTING LITS4292A Portable Lamp
Product Information
- Model: LITS4292A
- Product Dimensions: 15L X 15W X 28H
- Power Cord : Polarized plug (one blade is wider than the other) for safety
- Recommended Bulb: On/Off Type A Bulb max 100-watt or LED Bulb max 12-watt (9-watt LED bulb included in the box)
Product Usage Instructions
WARNING
This portable lamp has a polarized plug (one blade is wider than the other)
as a safety feature to reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Never use an extension cord unless the plug can be fully
inserted. Do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
- Unplug lamps before using any cleaning solutions.
- Dust shades with a feather duster or with an appropriate vacuum brush attachment.
- Wipe lamp bases with a soft, dry cloth and clean them with methods appropriate to the material.
- Avoid the use of chemicals and household cleaners as they may damage the finish.
ASSEMBLY
Before beginning assembly of the product, make sure all parts are present.
Compare parts with the package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time is 6 minutes.
-
Step 1:
Pull the power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A). Be careful not to twist the power cord and tighten it securely. -
Step 2:
Insert the Harp (E) into the Saddle (C). -
Step 3:
Put the Shade (F) on the Harp (E), then tighten the Finial (G) into the Harp (E). -
Step 4:
Put the lamp on a level surface to check if everything is stable. -
Step 5:
Insert the Bulb (H) into the Socket (D).
Model# LITS4292A
Product Dimensions: 15″L X 15″W X 28″H
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock. this plug will fit in a
polarized outlet only one way. if the plug does not fit fully in the outlet,
reverse the plug, if it still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
CARE AND MAINTENANCE
- Unplug lamps before using any cleaning solutions.
- Dust shades with a feather duster or with an appropriate vacuum brush attachment.
- Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
- Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guidelines below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
- If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PREPARATION
- Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 6 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help.
NOTE : PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR LED BULB MAX 12-WATT, THERE IS AN LED 9-WATT BULB IN THE BOX
INSTRUCTIONS
- Step 1: Pull the power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A). Be careful not to twist the power cord and tighten it securely.
- Step 2: Insert the Harp (E) into the Saddle (C). Put the shade (F) on the Harp (E), then tighten the Finial (G) into the Harp (E), Insert the bulb (H) into the socket (D).
- Step 3: Put the light on a level surface to check if everything is stable.
Please email [email protected]