SAFAVIEH LIGHTING FLL4043A Portable Lamp Instruction Manual
- June 13, 2024
- SAFAVIEH LIGHTING
Table of Contents
SAFAVIEH LIGHTING FLL4043A Portable Lamp
Product Information
This portable lamp is equipped with a polarized plug, which is a safety feature designed to reduce the risk of electric shock. The plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, please contact a qualified electrician. Please note that this lamp should never be used with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.
When cleaning the lamp, always unplug it before using any cleaning solutions. Dust the shades with a feather duster or an appropriate vacuum brush attachment. Wipe the lamp bases with a soft, dry cloth and clean them using methods suitable for the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
Product Usage Instructions
Preparation:
- Before beginning the assembly of the product, ensure that all parts are present.
- Compare the parts with the package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- The estimated assembly time is approximately 15 minutes.
- If you encounter any difficulties during assembly, our friendly Customer Care team is available to assist you. Please email customersupport@safavieh.com
Product Assembly:
- Step 1: Screw the Lamp body (B) onto the Lamp base (A). Screw the Lamp body (B1) onto the Lamp body (B). Screw the Lamp body (B2) onto the Lamp body (B1). Screw the Lamp body (B3) onto the Lamp body (B2). Be careful not to twist the power cord and tighten securely.
- Step 2: Insert the Harp (E) into the Saddle (C). Put the shade (F) on the Harp (E), then tighten the Finial (G) into the Harp (E).
- Step 3: Insert the bulb (H) into the socket (D).
- Step 4: Put the lamp on a level surface to check if everything is stable.
Note: Please use an on/off type A bulb with a maximum wattage of 60 watts or an LED bulb with a maximum wattage of 9 watts. There is an LED 4-watt bulb included in the box.
Model# FLL4043A
Product Dimensions: 21.5″ L X 12″W X 60″H
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as
a safety feature to reduce the risk of electric shock. this plug will fit in a
polarized outlet only one way. if the plug does not fit fully in the outlet,
reverse the plug, if it still does not fit, contact a qualified electrician.
Never use with an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced
- If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 15 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
NOTE: PLEASE USE ON/OFF TYPE”A” BULB MAX 60-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX
-
Step 1: Screw the Lamp body (B) onto the Lamp base (A). Screw the Lamp body (B1) onto the Lamp body (B). Screw the Lamp body (B2) onto the Lamp body(B1).
Screw the Lamp body (B3) onto the Lamp body(B2). Be careful not to twist the power cord and tighten securely. -
Step2: Insert the Harp (E) into the Saddle (C). Put the shade(F) on the Harp(E), then tighten the Finial (G) into the Harp (E). Insert the bulb(H) into the socket(D).
-
Step3: Put the light on a level surface to check if everything is stable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>