Nisco Co Ltd BKZQ01 Bluetooth Speaker with Somatosensory Vibration Instructions

Nisco Co Ltd BKZQ01 Bluetooth Speaker with Somatosensory Vibration

Product Information

• Product Name : Bluetooth speaker with somatosensory vibration
• Model : BKZQ01
• Manufacturer : Hangzhou Zhiyuan Technology Co., Ltd.
• Address : No. 10, Naxian Street, Liangzhu Mainland Industrial Park, Hangzhou, Zhejiang Province
• Telephone : 0571-88212500
• Email : zengrt@allytech.com.cn

Product Usage Instructions

Hardware Installation

1. Connect the desired number of vibrators and speakers according to the requirements.
2. Insert the power cord into the power interface to supply power to the control box and turn on the system.

System Configuration Diagram

Serial Number | Parts

• 1 | Control box
• 2 | Vibrator
• 3 | Speakers
• 4 | Speaker cable
• 5 | Power supply line
• 6 | Communication line
• 7 | Control box fixing plate

Parts list

• Control Box: 1 pc
• Vibrator: 1 pc
• Speaker: 1 pc
• Speaker cable: 4 pcs
• Power supply line: 1 pc
• Communication line: 1 pc

Function description

Interactive control function:

After powering on, press the Bluetooth on/off button on the remote control to turn on the Bluetooth. Use a device that can act as a Bluetooth host to search for Bluetooth playback the Bluetooth name Base Speaker-N**. Once found, connect to this device and it will be able to play the audio output from the host. Through the remote control buttons, you can control the audio playback, including functions such as pause/resume, volume adjustment, and previous/next track.

Vibration function:
When audio is playing, the vibrator will vibrate in sync with the low- frequency fluctuations of the audio. The vibration intensity can be adjusted in three levels. There are three massage modes available: continuous vibration function, follow the audio vibration function, and customizable vibration function.

Thank you for choosing our company’s products, please read this instruction manual carefully before use

Product name and model

• Brand： Hangzhou Zhiyuan Technology Co., Ltd.
• Products： Bluetooth speaker with somatosensory vibration
• Model： BKZQ01

Change Description

Manufacturer information

Manufacturer ：Hangzhou Zhiyuan Technology Co., Ltd.
Address ： No. 10, Naxian Street, Liangzhu Mainland Industrial Park, Hangzhou, Zhejiang Province
Telephone ：0571-88212500
Email ：zengrt@allytech.com.cn

Product Installation

Hardware Installation
Control Box Installation

1. Connect the desired number of vibrators and speakers according to the requirements；
2. Insert the power cord into the power interface to supply power to the control box and turn on the system；

System Configuration Diagram

Parts list

Function description

Interactive control function:

Serial Numbe r|

Function

|

Introduction

---|---|---

1

|

Bluetooth playback

| After powering on, press the Bluetooth on/off button on the remote control to turn on the Bluetooth. Use a device that can act as a Bluetooth host to search for the Bluetooth name “Base Speaker-N**”. Once found, connect to this device and it will be able to play the audio output from the host. Through the remote control buttons, you can control the audio
| | playback, including functions such as pause/resume, volume adjustment, and previous/next track.
---|---|---

2

|

Follow     the    audio vibration function

|

When audio is playing, the vibrator will vibrate in sync with the low- frequency fluctuations of the audio. The vibration intensity can be adjusted in three levels.

3

|

Massage function

|

There are three massage modes available: continuous massage, pulse massage, and wave massage. The massage intensity can be adjusted in three levels. Continuous massage means the vibrator will vibrate continuously. Pulse massage means the vibrator will vibrate for 3 seconds and then stop for 3 seconds, repeating this cycle. Wave massage means the vibrator will start at level one and gradually increase the vibration evenly within 3 seconds, then continue at level three for 3 seconds, followed by a gradual decrease in vibration within 3 seconds back to level one, and finally, it will continue for 1 second before repeating the cycle.

Technical indicators

1. Input： DC 24-30V 4A Max.
2. Output：80W Max.
3. Oscillator impedance：8ohm
4. Oscillator power rating：20W
5. Oscillator output power：10W/pcs（Follow the audio），15W/pcs（Massage）
6. Oscillator frequency response：20-200Hz
7. Horn power：8W*2
8. Speaker frequency response：40-20kHz
9. The oscillator outputs the maximum peak-to-peak：±15.2V
10. Operating temperature range：-10℃~50℃

Form factor

Control box
Size：168.5mm106.6mm42mm Tolerance±0.5mm

Vibrators
Size：235.9mm173.0mm27mm ±0.5mm

Speaker
347.6mm65.6mm50.0mm ±0.5mm

Control box fixing plate
129.1mm61.0mm5.7mm ±0.5mm

Environmental conditions and limits on work and storage

Storage environment

1. Please do not place your device in extremely cold or hot places.
2. Please avoid severe impacts or electric shocks to your device.

Working environment

• The device is not waterproof, so please keep it dry. Avoid exposing the device to water and steam. Do not touch the device with wet hands.
• Please do not use the device in dusty, humid, dirty, or magnetic environments.

Cleaning and maintenance

1. Before cleaning or maintaining the device, please turn it off and disconnect it from the power source.
2. Please do not use chemical cleaners, cleaning powders, or other chemical agents (such as alcohol and benzene) to clean the device. You can use an anti-static slightly damp soft cloth for wiping.

Summary of Security Information

1. Please read these safety precautions carefully to ensure the correct and safe use of your device.
2. Please connect the device to the appropriate power voltage. Exceeding the voltage range may pose a risk of damage.
3. It is recommended to use the device in the following environment: Temperature: -10°C to 50°C; Humidity: 20% to 90%.
4. It is recommended to store the device in the following environment: Temperature: -20°C to 70°C; Humidity: 5% to 95%.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The equipment should be installed and operated with a minimum distance 20cm between the radiator and your body

IC WRING
This device complies with the Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3(B)
NMB-3(B)
The equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The equipment should be installed and operated with minimum distance 20cm between the radiator and your body limitesd’exposition aux rayonnements ISED Canada établies pour unenvironnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé avec un minimum de20cm de distance entre la source de rayonnement et votre corps.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>