snapav MM815 Lifting Arm Instruction Manual
- June 13, 2024
- snapav
Table of Contents
Attaching the MM815 Lifting Arm
into the RB100 Recess Box Kit
MM815 Lifting Arm
STEP 1
Insert MM815 Lifting arm into the RB100 Recessed box making sure to align the
screw holes on the lifting arm to the screw holes on the RB100 as indicated.
NOTE: This process will require the use of four {14} M8x16 screws from
your mount parts package. 
STEP 2
Once all 4 holes are aligned, insert M8x16 screws into holes 1 and 2 and
tighten them using allen wrench. STEP 3
Connect MM815 lifting arm to power supply and use remote to lower lifting arm
to expose holes 3 and 4.
Gently push lifting arm up and back to secure wall bracket to back of RB100.
Insert M8x16 screws into holes 3 and 4 and tighten using allen wrench.
Tighten all four screws then continue with the next step of the installation.
MM815 with RB100 Addendum 03-23
Please read the entire MM815 installation guide and the RB100 manual before
you begin.
If you have any questions, visit MantelMount.com or call (800)-897-9755.