QAZQA 103449 Indoor Art Deco Floor Lamp Instruction Manual
- June 13, 2024
- QAZQA
Table of Contents
QAZQA 103449 Indoor Art Deco Floor Lamp
Product Information
The product is a lighting fixture with the following specifications:
- Model: Pallon FL 2
- Manufacturer: FittinQ B.V. (The Netherlands) and FittinQ LTD (United Kingdom)
- Overall Sizes: 6cm x 7cm x 15cm
- Power Supply: 220-240V~ at 50Hz
- Socket Type: E14
- Maximum Wattage: 2xMax.25W
Please note that this is a general overview of the product information and usage instructions. For detailed installation and safety guidelines, refer to the complete user manual provided with the product.
Installation
Pallon FL 2 103449,103450
Overall Sizes
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12-voltage conductors
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical. components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Class III: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltage.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by a wall switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed of together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert,
- The Netherlands www.gazqa.nl
- FittinQ LTD 55 Baker Street, London, W1U 7EU United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>