DeliverDeli USE58-300-9 Heavy Duty Soft Close Slides Instruction Manual
- June 13, 2024
- DeliverDeli
Table of Contents
DeliverDeli USE58-300-9 Heavy Duty Soft Close Slides
Product Information
The USE58-300 Series Dura-Close Heavy Duty Soft-close Slides with 2nd
Generation clips are undermount slides designed for drawers in cabinetry. They
feature a soft-close mechanism for smooth and quiet closing. The slides come
with 2nd Generation
undermount clips, which provide improved stability and adjustment options. The
product is compatible with various clip models, including 6 Way Adjustable,
Zinc (UCLIP2ND-6WZ), 4 Way Adjustable, Zinc (USCLIP2ND-4WZ), 4 Way Adjustable
(USCLIP2ND-4W), 2 Way
Adjustable, Narrow (US-CLIP-NR), and 2 Way Adjustable (US-CLIP-2W).
Installation
Dura-Close Heavy Duty Soft-close Slides with 2nd Generation clips
Learn more about our 2nd Generation undermount clips.
Scan QR to view product video. https://delivr.com/2cmy9
Simplify bracket installation with HR-TOOL-RBINST.
Scan QR to view video. https://delivr.com/2yhj3
Parts Included
pair USE58-300 Series Dura-Close Undermount Slides
USE58-300 Series Dura-Close Undermount Slides
- 6 each #6 x 5/8” Flat Head Screws (Part # 6X580)
- 8 each #6 x 5/8” Pan Head Screws (Part # 6X2580)
- 1 pair Undermount Release Clips
- 1 pair Rear Mounting Brackets (Framed cabinetry only)
Required Tools
- Pencil Tape
- Screwdriver Framing Square
- Level
- Measure
- Framing Square
Optional Tool
- Rear Slide Bracket Installation Tool
- (See QR code above for a video with details
Compatible Clips: See how to adjust 2nd Generation Undermount Clips on page 5
6 Way Adjustable, Zinc
- UCLIP2ND-6WZ
- (Replaces US-CLIP-6WZ)
Way Adjustable, Zinc
- USCLIP2ND-4WZ
- (Replaces US-CLIP-4WZ)
Way Adjustable
- USCLIP2ND-4W
- (Replaces US-CLIP-4W)
Way Adjustable, Narrow
- US-CLIP-NR
Way Adjustable
- US-CLIP-2W
Construction & Assembly Specifications
|
Total Cabinet Depth
|
Overall Drawer Length
| FRAMELESS
Min Inside Cabinet Depth
| FACE FRAME
Min Inside Max Inside Cabinet Cabinet
Depth Depth
---|---|---|---|---
| USE58-300-9 – (9”) drawer
10-1/4”
260 mm
| 12”
305 mm
| 9”
229 mm
| 10-1/2”
266 mm
| 10-1/2”
266 mm
| 11-3/4”
299 mm
| USE58-300-12 – (12”) drawer
12-9/16”
319 mm
| 15”
381 mm
| 12”
305 mm
| 12-5/8”
321 mm
| 12-7/8”
326 mm
| 14”
356 mm
| USE58-300-15 – (15”) drawer
15-5/16”
389 mm
| 18”
457 mm
| 15”
381 mm
| 15-5/8”
397 mm
| 15-7/8”
403 mm
| 17”
432 mm
| USE58-300-18 – (18”) drawer
18-5/16” 21” 18”
465 mm 533 mm 457 mm
| 18-5/8”
473 mm
| 18-7/8”
479 mm
| 20”
508 mm
| USE58-300-21 – (21”) drawer
21-5/16” 24” 21”
541 mm 610 mm 533 mm
| 21-5/8”
549 mm
| 21-7/8”
555 mm
| 23”
584 mm
| USE58-300-24 – (24”) drawer
24-5/16” 27” 24”
618 mm 686 mm 610 mm
| 24-5/8”
625 mm
| 24-7/8”
632 mm
| 26”
660 mm
CABINET AND DRAWER BOX DIMENSION VERIFICATION
Ensure that the cabinet and drawer are both square by measuring the distance from the front of each side to the back of the opposite side of both the cabinet and drawer
- The maximum difference is 1/16”
- If the difference is greater than 1/16”, the slide will not work correctly
IMPORTANT
DRAWER BOX MINIMUM WIDTH (VARIES BY CLIP)
| US-CLIP2ND-6WZ US-CLIP-6WZ| US-CLIP2ND-4WZ US-CLIP-4WZ| US-
CLIP2ND-4W US-CLIP-4W| US-CLIP-2W| US-CLIP-NR
---|---|---|---|---|---
5/8” (16 mm) material| 7.25″| 7.25″| 7.25″| 6.25″| 4.75”
1/2” (13 mm) material| 7″| 7″| 7″| 6″| 4.5”
MAXIMUM DRAWER HEIGHT = OPENING MINUS 19 MM (3/4”)
FRONT VIEW OF THE DRAWER INSIDE THE CABINET
FRONT HOLE PATTERN
REAR NOTCH DIMENSIONS
- Installation Steps for Face-Framed Cabinetry
- Choose rear mounting brackets (Sold separately)
NOTE: Installation screws not included with brackets.
-
* USE-STEEL- USE-STEEL-309 (Required for USE58-300-9)
- USE-ADJ5 – Dowels plug into pre-drilled 8 mm system holes. Bracket provides wide range of lateral adjustment.
-
Install rear mounting brackets
NOTE : Simplify bracket installation with HR-TOOL-RBINST. Scan QR code on page 1 for a video walkthrough.
-
* On the front of the cabinet, measure the distance from the top of the cabinet to both the left and bottom corners of the cabinet opening- Measure the distance from the inside of each side of the cabinet to both the left and right edge of the cabinet opening
- Align the outside bottom edges of both brackets using the measurements from steps 2a & 2b
- Fasten rear mounting brackets to the rear of the cabinet using 2x #6 x5/8” screws per bracket
- For maximum adjustment during installation, use the slotted holes to fasten the screws loosely while making adjustments
- Fasten screws loosely to allow the brackets to adjust when the drawer is first installed and fastened
- Avoid stripping out screws by not overtightening
-
Install undermount slides
- Insert slides into cabinet opening and align the rear brackets with the slotted rear of each slide
- Align each slide to the corner of the cabinet opening (Recommended 1/8” setback for non-inset applications) and pre-drill each hole location using a 3/32” drill bit For Inset drawer front applications:
- Setback: 4 mm (5/32”) + Drawer Front Thickness Fasten each member to the front rail of the cabinet using the front hole of the cabinet member and 1x #6 x 1/2” flat head screw per side
-
Install undermount clips
Insert slides into cabinet opening and align the rear brackets with the slotted rear of each slide
- Install the drawer box
- Set the drawer box inside the cabinet Ensure drawer box sits flush to the bottom of the drawer box inside each notch at the back of the drawer box
- Press the drawer in toward the rear of the cabinet until both side slides engage with both release clips
- Listen for an audible click sound ensuring the drawer is locked in place
- Ensure the rear hooks are embedded within the rear hole of both sides of the drawer box
See how to remove drawer boxes on p. 6
How to Adjust 2nd Generation Undermount Clips
Up / Down Adjustment
Available with 4-way and 6-way clips
Turn wheel to adjust
Left / Right Adjustment
Available with 4-way and 6-way clips
Turn wheel to adjust
In / Out Adjustment
Available with 6-way clips
Move tab to adjust
-
Measure and mark cabinet
Measure from the top of the cabinet to the desired drawer location. Draw a level line on the inside of the cabinet where the top of the undermount slide will mount. -
Position the cabinet member
Use the line and a level to position the cabinet member to the side of the cabinet
Recommended setback: 4 mm (5/32”)
For inset applications: Inside Cabinet Depth Minimum = Slide Length + Setback
-
3 mm (3/16”)
-
Secure the slides to the cabinet
Fasten the slides to the cabinet using the fixed screw hole locations and 3 or more #6 x 5/8” screws for both slides ensuring that both cabinet members are level and parallel -
Install the drawer box
-
* Set the drawer box inside the cabinet- Ensure that the slides are resting within the notch at the drawer box
- Press the drawer in toward the rear of the cabinet until both side slides marry with each clip producing an audible click sound ensuring the drawer is locked in place
- Ensure the rear hooks are embedded within the rear hole of both sides of the drawer box
-
See how to adjust 2nd Generation clips on p. 5
How to Remove a Drawer Box
- Open and release the drawer box
-
* Pull the drawer out to the open position and locate the release clip levers on both sides- Press both levers in to unlock the drawer box then lift the box out of the cabinet
References
- Upgraded Second Generation Undermount Release Clips on Vimeo
- How to use your Rear Bracket Installation Tool on Vimeo
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>