MikroTik C52iG-5HaxD2HaxD-TC Wireless Router User Guide

MikroTik C52iG-5HaxD2HaxD-TC Wireless Router

Quick Guide

This device needs to be upgraded to RouterOS v7.7 or the latest stable version, to ensure compliance with local authority regulations!
It is the end users’ responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions.
This Quick Guide covers the model: C52iG-5HaxD2HaxD-TC.
This is a wireless network device. You can find the product model name on the case label.

(ID).

Please visit the user manual page on https://mt.lv/um for the full up-to- date user manual. Or scan the QR code with your mobile phone.
The most relevant technical specifications for this product can be found on the last page of this Quick Guide.
Technical specifications, brochures, and more info about products are at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found at https://mt.lv/help
If you need help with configuration, please seek a consultant https://mikrotik.com/consultants

First Steps

• Make sure your Internet service provider is allowing hardware change and will issue an automatic IP address;

• Connect the device to the power source;

• Open network connections on your computer and search for MikroTik wireless network – connect to it;

• The configuration can be done through the wireless network using a web browser or mobile app.
  Alternatively, you can use a WinBox configuration tool https://mt.lv/winbox;

• Open https://192.168.88.1 in your web browser to start configuration, user name: admin and there is no password by default (or, for some models, check user and wireless passwords on the sticker);

• Click the (Check for updates) button and update your RouterOS software to the latest version;

• Choose your country, to apply country regulation settings;

• Set up your wireless network password;

• Set up your router password;

• The following RouterOS “npk” packages are required for the core functionality of the product: wifiwave2, system.

Safety Information

• Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should be familiar with network structures, terms, and concepts.

• Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.

• This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the device.

• This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.

• We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
  Please use this product with care and operate at your own risk!

• This is a Class A product. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate measures.

• In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power adapter from the power outlet.
  Exposure to Radio Frequency Radiation : This MikroTik equipment complies with the European Union radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 38 centimeters from your body, occupational user, or the general public.

Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.
Exposure to Radio Frequency Radiation : This MikroTik equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 38 centimeters from your body, occupational user, or the general public. FCC regulations restrict operation to indoor use only.

Innovation, Science and Economic Development Canada

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This Class A digital apparatus complies with Canadian ICES-003.
CAN ICES-003 (A) / NMB-003 (A)
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Exposure to Radio Frequency Radiation : This MikroTik equipment complies with the IC radiation exposure limits set forth for an uncontrolled environment. This MikroTik device should be installed and operated no closer than 38 centimeters from your body, occupational user, or the general public.

UKCA Marking

CE Declaration of Conformity

Hereby, Mikrotīkls SIA declares that the radio equipment type C52iG- 5HaxD2HaxD-TC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products

WLAN

This MikroTik device meets Maximum TX power limits per ETSI regulations. For more detailed information see Declaration of Conformity above.

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Technical Specifications

Product Power Input Options| DC Adapter Output Specification| IP class of the enclosure| Operating Temperature
---|---|---|---
Voltage, V| Current, A
DC Jack (12 – 28 V DC)
PoE in Ethernet (18 – 28 V DC)| 24| 1.2| IP20| ±0°..+50°C

References

• MikroTik Routers and Wireless - Buy
• MikroTik Routers and Wireless - Buy
• MikroTik Routers and Wireless - Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>