DQ Wall Support DQ12-1127 Double Monitor Bracket with Gas Spring Instruction Manual
- June 13, 2024
- DQ WALL-SUPPORT
Table of Contents
DQ Wall Support DQ12-1127 Double Monitor Bracket with Gas Spring
Product Information
- Product Name: DQ monitorarm Pardo double black
- Model Number: DQ12-1127
- Compatible VESA Sizes: 75×75 and 100×100
- Maximum Weight Capacity: 2 monitors, each weighing between 1kg to 10kg (2.2lbs to 22lbs)
- Number of Installation Steps: 7
Product Usage Instructions
- Begin by unpacking the product and ensuring that all components are present.
- Identify and assemble the following components: A (x2), E (x2), F (x4), B (x2), C (x1), D (x1), G, 3mm (x1), H, 6mm (x1), M4x12 (x4), M-A, M6x12 (x4), D6(x4), F, G, A, C.
- Attach the VESA plate to the back of each monitor using the appropriate screws (M-A for smaller monitors, M-C for larger monitors).
- Using the provided screws, attach the monitor arms to the VESA plates on each monitor.
- Position the monitors at the desired height and distance apart on the monitor arms.
- Securely fasten the monitor arms to the desk or wall using screws and the provided components (refer to the manual for specific instructions based on your installation type).
- Ensure that the monitors are securely attached and adjust the positioning as needed.
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE
Check that the bracket is secure and safe to use at regular intervals (at least every three months).
SPECIFICATION
PARTS
INSTALLATION
Read User Manual Online (PDF format)
Loading......