QAZQA QL7001034 Floor Lamp Incl LED Instruction Manual

QAZQA QL7001034 Floor Lamp Incl LED

Product Information

• Product Name: Sixties FL Satin
• Model Number: 98219
• Manufacturer: FittinQ B.V.
• Manufacturer Address: Smaragdweg 52, 5527 LB Hapert, The Netherlands
• Website: www.qazqa.nl
• Barcode: 8718881095962
• Power Supply: 220-240V~ 50Hz
• Lamp Type: LED Module
• Lamp Wattage: 5x5W
• Luminous Flux: 520lm per module, 380lm per lamp
• Color Temperature: 3000K
• Color Rendering Index (CRI): >80
• Lifespan: 30000 hours
• Switch Lifespan: 15000 ON/OFF cycles

Product Usage Instructions

1. Make sure the floor lamp is connected to a compatible power outlet with a voltage of 220-240V~ and a frequency of 50Hz.
2. Position the lamp in the desired location.
3. Switch on the lamp using the ON/OFF switch.
4. The lamp emits a warm white light with a color temperature of 3000K and a color rendering index (CRI) of over 80.
5. To adjust the brightness, use the lamp’s built-in dimming feature if available.
6. When not in use, switch off the lamp to conserve energy.
7. Do not exceed the specified lifespan of the lamp or the switch.
8. If you encounter any issues or need further assistance, refer to the instruction manual or contact the manufacturer.

Sixties FL Satin

• Floor lamp
• incl.LED QL7001034
• 5x520lm Module
• 5x380lm Lamp
• 5x5W LED Module
• 5x5W Lamp
• 220-240V~50Hz
• 3000K 2500LM
• CRI>80
• 30000 h
• 15000 ON/OFF

Overall Size

This product contains a light source of energy efficiency class F

Replaceable (LED only) light source by a professional

Replaceable control gear by a professional.

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. lake account of the minimal separation distance from other objects and the room required around the fitting
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Marisasterbale.
11. Take note of the symbols when connecting wires:

Live conductor
Earth conductor
Neutral conductor

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands www.gazqa.nl

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>