ISHN LOTO 8 Step Lockout-Tagout Procedure Instructions

ISHN LOTO 8 Step Lockout-Tagout Procedure

Product Information

The lockout-tagout (LOTO) procedure is a safety measure designed to reduce accidents and eliminate hazards during equipment repairs. It involves shutting down and isolating the energy source of the equipment to prevent accidental activation while repairs are being made. The procedure requires the use of LOTO padlock devices and proper training for all workers involved.
PK Safety, a trusted supplier of occupational safety and personal protective equipment, provides comprehensive LOTO training and offers a range of safety products to ensure workplace safety.They have been in operation since 1947 and prioritize compliance with OSHA, ANSI, PPE, and CSA work safety standards.

Product Usage Instructions

8 steps to a lockout-tagout procedure
A guide to reducing accidents and eliminating hazards

1. Shutdown preparation
   Everyone occupying the worksite should be trained on proper LOTO procedures as well as the potential hazards present within the space. Educating employees is the first step to a successful repair job.

2. Notify employees
   All workers whose jobs will be affected by the LOTO should be notified of the planned outage ahead of time, including which pieces of equipment will be taken offline and for how long. If the employees need to use the equipment for work, they should be given alternate tasks or responsibilities.

3. Shut down the energy source
   Before making the repairs, use the appropriate shutdown procedures to turn off the equipment safely. Check the owner’s manual to learn how to turn off the equipment properly.

4. Isolate the energy source
   Disconnect the underlying energy source from the equipment that needs to be maintained to further eliminate the possibility of someone accidentally turning it on while the repairs are being made. Isolate and shut off circuit breakers connected to the equipment. Turn off generators, compressors and other machines supplying energy to the equipment.

5. Lock the energy sources
   Use a LOTO padlock device to physically prevent anyone from accessing and restarting the energy supply while the repairs are being made. The device blocks the switch, ignition, or circuit from being activated. It requires a key that should remain in the technician’s control and on their person at all times.

6. Release the stored energy
   The LOTO prevents new energy from entering the equipment, but there could be additional energy stored in the machine. Spring tension or parts raised/suspended overhead are examples of indirect stored energy. Make sure there are no moving parts or processes that could start during the repair process, such as air compressors, compactors, and sliding sleeves.

7. Verify lockout
   Verify that there is no way for someone to accidentally restart the equipment while the repairs are being performed. Test the equipment to see if it starts and to ensure the lockout is successful.

8. Maintain lockout
   Keep the equipment offline and disconnected from the power source until the repairs are complete. The LOTO device must remain in place throughout the process. Remove unrelated workers from the repair site and communicate with incoming workers during the shift change to inform them of the situation at hand. Post visual reminders and set up barriers to reduce access to the affected area.
   These steps are designed to help workers and repair technicians do their jobs safely in the field. The equipment in question must be completely drained of its power and disconnected from external energy sources and the electrical grid before the work begins.

KEYWORDS: electrical safety lockout tagout LOTO LOTO training workplace hazards
It is essential to drain the equipment of power and disconnectit from external energy sources and the electrical grid before commencing any repair work.
If you require further assistance or have any questions, you can contact PK Safety’s customer service at 800-829-9580 or visit their website at https://www.pksafety.com/contact-us/.

References

• Rick Pedley | ISHN
• lockout tagout LOTO | ISHN
• electrical safety | ISHN
• workplace hazards | ISHN
• LOTO training | ISHN
• Contact Us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>