Remote-things LLC NDW-15WT Glass Panel Heater with Digital Timer User Manual

Remote-things LLC NDW-15WT Glass Panel Heater with Digital Timer

Product Information

• Model: NDW 15WT
• Type: Glass panel heater

Specifications:

• Auxiliary electricity consumption: 2.0 1.0 .c 1.98 1.983 0.985 0.0015
• Wall mounted mode dimensions: 845mm x 445mm x 288mm
• Power supply: 120V
• Frequency: 60Hz

Product Usage Instructions

Before First Use:

1. Ensure that the device is properly installed according to the mounting guide.
2. Download the associated app for your device.
3. Connect the device to a WiFi network using the app.

Important Safeguards:
Follow these safety precautions while using the product:

• Do not modify or tamper with the device.
• Ensure a minimum distance of 20cm between the radiator and your body during operation.

Connecting to WiFi:
To connect the device to WiFi, follow these steps:

1. Ensure that the device is properly installed and turned on.
2. Download the associated app from your app store.
3. Open the app and follow the on-screen instructions to connect the device to your WiFi network.

Using the Touch Screen Display:

• Power Button: Press to turn the device on and off.
• Up Button: Press to increase the heatinglevel.
• Down Button: Press to decrease the heating level.
• Setting Button: Press to access additional settings.

Using the Remote Control:

• Power Button: Press to turn the device on and off.
• Up Button: Press and hold for three seconds to turn on/off the frame section.
• Down Button: Press and hold for three seconds to select the frame colors.
• Temperature Setting Button: Press to set the desired temperature.
• Low/High Heating Selection Button: Press to switch between available heating levels.
• Timer Setting Button: Press to set the timer (0-24 hours).
• Child Lock/ECO Button: Press and hold for three seconds to lock the screen and activate ECO mode.

Note:
For detailed instructions on using specific features, refer to the user manual.

Waste Electrical Recycling:
Dispose of the device in accordance with local waste electrical recycling guidelines.

Model Identifier:
The model identifier for this product is NDW-15WT.

BEFORE FIRST USE
Read and follow all the instructions in this manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. Retain in the event that warranty service is required.

NOTE:
The rating of this product (as marked on the product identification plate) is based on specific loading tests. Normal use or the use of other recommended attachments may draw significantly less power.

IMPORTANT SAFEGUARDS

When using any electrically powered product, basic safety precautions should always be followed, including the following:

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.

WARNING
To reduce the risk of fire, electrical shock or injury to persons or property:

• Read all instructions before using this appliance and keep them for future reference.
• Use only the voltage specified on the rating plate of the heater.
• Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the appliance may overheat and become a fire risk.
• Do not cover grilles, block entry or exhaust of airflow by placing appliance against any surface. Keep all object at least 1 meter from the front, side and rear of the appliance.
• Do not place the appliance close to a radiant heat source.
• Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.
• This appliance heats up when in use. To avoid burns, do not let bare skin touch hot surface. Switch off and let cooling before moving.
• Do not use the appliance to dry clothes.
• Do not insert or allow foreign object or metal utensils to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
• Do not immerse in liquid or allow running into the interior of the appliance, as this could create an electrical shock hazard.
• Do not reach for an appliance that has fallen into water. Switch of at supply and unplug immediately.
• Do not operate any appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return to a qualified electrical person for examination, electrical or mechanical adjustment, service or repair.
• Do not operate appliance with wet hands.
• The most common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning air vents and grilles.
• Do not use this appliance in a window as rain may cause electric shock.
• Do not use a abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
• Do not connect the appliance to the mains voltage until completely assembled and adjusted.
• This appliance is not intended for use in outdoor locations.
• Do not use this appliance in the immediate surrounds of a bath, a shower or a swimming pool or other liquids.
• Always operate upright.
• Switch off and let cooling before moving.
• Do not operate with cord set coiled up as a build up of heat is likely, which could be sufficient to become a hazard.
• The use of an extension cord with this appliance is not recommended.
• Do not remove plug from power socket until the appliance has been switched off.
• Do not remove plug from power socket by pulling the supply cord-always grip plug.
• Always unplug appliance when not in use.
• CAUTION: This product is NOT suitable to be used on long pile carpets or Flokati rugs.
• Do not allow cord to come in contact with heated surface during operation.
• Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away from traffic areas so that it will not be tripped over.
• Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area.
• Do not use outdoors or whilst standing on a damp floor.
• Do not store appliance while it is still hot.
• This appliance is not intended for use by young children or infirm persons without supervision.
• Young children should be supervised to ensure they do not play with the appliance.
• The appliance must not be located immediately below a socket-outlet.
• Do not use this appliance with another programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the appliance is covered or positioned incorrectly.
• All covers of this appliance is intended to prevent direct access to the heating elements and must be in place when the appliance is in use.
• WARNING: In order to avoid overloading, do not cover the heater.”
• To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to rain, moisture or any liquid other than those necessary for correct operation of the product.
• the fireguard does not give full protection for young children and for infirm persons.
• If the supply cord is damaged, it must be replaced by a qualified electrical persons in order to avoid a hazard.
• Do not use this appliance outdoors pr on wet surfaces Avoid spilling liquid on the appliance
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such a timer, or connected to a circuit that is regularly on and off by the utility.”
• Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
• This appliance is intended for household use only and not for commercial or industrial use.

OVERVIEW OF THE APPLIANCE

SPECIFICATIONS

• Model Number NDW-15WT
• Rated Power 1500W
• Rated Voltage 120V 60Hz
• Dimensions(mm) 845×115×350

The function module

Circuit Diagram

Control

1. Setting button
2. Up button
3. Down button
4. Power button
5. Heating element working indicator
6. Low heating indicator
7. High heating indicator
8. Timer indicator
9. Wifi indicator (if connected ok, wifi indicator lights on;if failed,it flashes)
10. LED number display
11. Timing settings
12. Child Lock/ECO
13. Low high heating selection
14. Temperature setting

Starting

1. Take out the heater from the carton carefully. Please save the carton for off-season storage.
2. Ensure the heater is fully assembled according to the Mounting Guide.
3. It is better not to use the same electric outlet with other high wattage electric appliances in order to avoid overloading your circuit.

Panel control

Remote control

DOWNLOAD APP

• Scan the QR code below for a simple download using your smart device.
• Alternatively, search ‘Smart Life’ on your device application store to download.

CONNECT WIFI

1. Enter the interface.
2. Click the + icon in the upper right-hand corner or alternatively press Add Device.
3. Go to Small Home Appliances and select Heater.
4. Enter the corresponding password to the chosen Wi-Fi network account.
5. Check that the Wi-Fi icon is blinking on the device and tick the ‘Confirm indicator rapidly blinking’ box. If the indicator is not blinking reset the Wi-Fi (see Operation Instructions).
6. Set the device information and press Done to enter the control interface where you will now be able to control the heater.

Safety Feature

• The unit is equipped with a high limit switch, the heater will automatically shut off if it is in an over-heating condition.
• The heater will automatically turn back on when it has cooled down.

User tips

CLEANING INSTRUCTIONS

Cleaning behind the heater

• It is very easy to clean behind it. Hold two sides of the heater ,after upwards pull the heater forwards.then you can clean behind.
• After cleaning, the heater must be fixed in the normal position.

The heater requires regular cleaning to ensure trouble-free operation:

• Unplug the heater from the mains supply before cleaning.
• Ensure that the heater has been allowed to cool down completely before cleaning.
• Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
• Use a vacuum cleaner to remove dust and fluff from around the grilles.
• Ensure the heater is dry before plugging back into the mains supply.

Warning

1. Fixing the heater rightly on the wall or put the heater in the right position.
2. The heater is to be installed so that the controls cannot be touched by a person using a bath or shower.
3. The heater is to be installed so that it is not located directly under a socket outlet.
4. When the heater is working as it is in free standing mode with the foot set, please do not use it in the vicinity of bath, shower, or swimming pool.
5. When the heater is working as it is in wall mounted mode, do not touch the control unit when using it in the vicinity of bath, shower or swimming pool.
6. Consult a qualified electrician or service technician If the power cord is damaged.
7. DO NOT cover the heater when it is working.
8. Always store the heater when not in use.
9. Make sure the heater has cooled down before store it away.

Service
When you require service, contact your local dealer.

REPLACEMENT OF SUPPLY CORD
The supply cord damaged must be replaced by a service agent or equivalent qualified person in order to prevent a hazard.

Storage
If you do not plan to use the heater for extended periods of time, it is recommended that the heater is cleaned and then stored (preferably in its original packaging) in a cool dry place.

Mounting Guide

Wall mounted mode

1. Insert the bracket(to the hole),turn it anticlockwise 90°, fasten it with screw;
2. Press the rubber pad (in the hole), fasten it with screw.

Caster Installation & removal

WASTE ELECTRICAL RECYCLING

This symbol indicates that this product is classed as Electrical or Electronic Equipment and should not be disposed of with other household waste.

• The Waste Electrical and Electrical Equipment (WEEE) Directive has been introduced across the European Union:
• To recycle waste electrical products using the best available recovery and recycling techniques in order to minimize the impact on the environment
• To treat any hazardous substances and
• To avoid increasing landfill.
• WEEE product should be disposed of by handing it over at a designated collection point.

For more information about where you can drop off your waste product for recycling, please contact your local authority.

MODEL IDENTIFIER

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or reloca te the receiving antenna.
• Increase the separation between the equi pment and receiver.
• Connect the equipment into an outlet on a circuit different f rom that to which the receiver is c onnected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution:
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>