SIMONS VOSS 3063 Digital Smart Relay 2 User Manual
- June 13, 2024
- SIMONS VOSS
Table of Contents
SIMONS VOSS 3063 Digital Smart Relay 2
Product Information
The Digital Smart Relay 2 3063 is a passive smart card technology device developed for system environments. It functions as an electronic switch that can be activated with a SimonsVoss ID medium, such as a transponder or smart card. The device serves as an access control reader or a key switch, allowing it to openelectrically operated doors, gates, and barriers. Additionally, itcan switch lighting, heating, and machines on and off. The Digital Smart Relay 2 3063 also transmits data from ID media to third-party systems like time-and-attendance systems, cashless vending systems, or facility management systems.
With its wireless network-ready feature, the Digital Smart Relay 2 3063 offers instant connectivity. It also supports release usingan external signal. The device provides several benefits to customers, including being an intelligent additional component forlocking devices. It offers optional solutions with integrated and external card readers for machines, time-and-attendance systems, and access control readers. Furthermore, it can be used as a gateway in a virtual network.
System Specifications and Interdependencies with Other Products
- LSM: LSM 3.1 SP1 and higher
- Network: Virtual network and online
- Miscellaneous: Must be integrated into a G2 or mixed locking system
Technical Specifications
- Housing: Made of white plastic (polyamide 6.6)
- Dimensions: 78 x 78 x 19 mm (H x W x D)
- Protection Rating: IP20 (IP54 as WP variant, IP65 with additional seal for the cable inlet)
- Humidity: < 95% without condensation
- Vibrations: 15 G for 11 ms
Technical Specifications for Output Relay
-
Type: NO contact (Normally open contact, reversible)
-
Continuous Current: Max. 1.0 A
-
Switch-on Current: Max. 2.0 A
-
Switching Voltage: Max. 24 V
-
Switching Power: 106 activations at 30 V A
-
Multi-function connections F1, F2, F3: Max. 24 V DC, max. 50 mA
-
Loggable Access Events: 3,600 access events (200 access events as gateway)
-
Time Zone Groups: 100+1
-
Number of Transponders that can be managed per Locking
Cylinder: Up to 64,000 -
Networking Capability: Network-ready with integrated Lock Node (WN(M).LN.I.SREL2.G2) or via external Lock Node with added door monitoring function
-
Other: Can be used as a gateway, freely configurable
Product Versions
- SREL2.ZK.MH.G2.W: Weatherproof version for external smart card readers, including connection cable (about 1 m long), IP54
- SC.M.I.G2: ‘Network Inside’ version with integrated Lock Node
- SC.M.E.G2.W:
Product Usage Instructions
To use the Digital Smart Relay 2 3063 effectively, please follow these instructions:
- Ensure that the Digital Smart Relay 2 3063 is integrated into a G2 or mixed locking system.
- If you intend to use the device as a gateway in a virtual network, make sure to order the ZK version.
- Connect the Digital Smart Relay 2 3063 to the appropriate power source and ensure it is properly grounded.
- If using an external smart card reader, connect it to the device using the provided connection cable (about 1 m long).
- Configure the device according to your specific requirements. Refer to the user manual for detailed instructions on configuration options.
- Mount the Digital Smart Relay 2 3063 in a suitable location, ensuring proper protection against environmental factors such as moisture and vibrations.
- Test the device by activating it with a SimonsVoss ID medium (transponder or smart card) to ensure proper functionality.
- If integrating the device with third-party systems, follow the instructions provided by the respective system manufacturer for proper integration and data transmission.
For further assistance or troubleshooting, refer to the user manual or contact our customer support.
Digital Smart Relay 2 3063 has been developed for system environments which use smart cards. It supports MIFARE® Classic, MIFARE® Plus and MIFARE® DESFire reader systems. Smart Relay 2 is an electronic switch which can be activated with a SimonsVoss ID medium (transponder or smart card), thus fulfilling the function of an access control reader or a key switch. In System 3060, it opens electrically operated doors, gates and barriers, and switches lighting, heating and machines on and off. It transmits data from ID media to third- party systems, such as time-and-attendance systems, cashless vending systems or facility management systems.
- Instantly wireless network-ready
- Release also possible using an external signal (SREL2.ZK.MH.G2.W)
CUSTOMER BENEFIT
-
Intelligent additional component for locking devices
-
Optional solution with integrated and external card readers for
MIFARE® cards (Classic, DESFire, Plus) -
Connection to third-party systems, e.g. barriers, gates,machines, time-and-attendance systems and access control readers
-
It can be used as a gateway in a virtual network
SYSTEM SPECIFICATIONS AND INTERDEPENDENCIES WITH OTHER PRODUCTS
LSM
- LSM 3.1 SP1 and higher
Network
- Virtual network and online
- You need to order the ZK version to use it as a gateway in a virtual network
Miscellaneous
- Must be integrated into a G2 or mixed locking system.
Dimension
Measurements indicated in mm
TECHNICAL SPECIFICATIONS
- Housing made of white plastic (polyamide 6.6)
- Dimensions: 78 x 78 x 19 mm (H x W x D)
- Semi-transparent base plate
- Protection rating: IP 20
- IP54 as WP variant
- IP65 with additional seal for the cable inlet
- Humidity: < 95 % without condensation
- Vibrations: 15 G for 11 ms,
- 6 shocks as per IEC 68-2-27
- Not approved for use when subject to permanent vibrations
- Circuit board dimensions: 50 x 50 x 14 mm (H x W x D)
- Power supply voltage: 9–24 V DC
- Power limitation: Mains adapter must be limited to 15 V A
- Standby current: < 100 mA
- Max. current: < 300 mA
- Pulse duration can be programmed between 1 and 25.5 sec.
TECHNICAL SPECIFICATIONS FOR OUTPUT RELAY
-
Type: NO contact
- Normally open contact, reversible
-
Continuous current: max. 1.0 A
-
Switch-on current: max. 2.0 A
-
Switching voltage: max. 24 V
-
Switching power: 106 activations at 30 V A
-
Multi-function connections F1, F2, F3: max. 24 V DC, max. 50 mA
-
Loggable access events: 3,600 access events 200 access events as gateway
-
Time zone groups: 100+1
-
Number of transponders that can be managed per locking
cylinder: up to 64,000 -
Networking capability: network-ready with integrated Lock Node (WN(M).LN.I.SREL2.G2) or via external Lock Node with added door monitoring function
-
Other: Can be used as gateway, freely configurable
PRODUCT VERSIONS
Digital Smart Relay 2 3063
for active transponders and also designed for use with passive smart cards.
Basic version in white housing, relay contact as NO contact (reversible to
break contact); can only be operated with direct current (9 to 24 V DC); can
be directly networked with integrated Lock Node (must be ordered separately),
with connection available for an external antenna (SREL.AV). With access
control, time zone management and events logging. With serial port and the
option of triggering the SREL2 by means of an external circuit (isolated NO
contact). Can be used as gateway in a virtual network (active transponder).
Designed to also house an internal MIFARE® card reader and able to connect one
or two additional external MIFARE card readers. Can be used as gateway in a
virtual network (passive smart cards). SREL2.ZK.MH.G2.W
Smart card reader, internal
For inserting into the Smart Relay 2 relay circuit board for smart cards
(SREL2.ZK.MH.G2.W), operated with MIFARE® Classic, MIFARE® Plus or MIFARE®
DESFire smart cards SC.M.I.G2
Smart card reader, external
For installation in a non-secured area; connection to Smart Relay 2 for smart
cards via cable (not included in supply package; recommended cable type:
Cat5); Smart Relay 2 operated with MIFARE® Classic, MIFARE® Plus or MIFARE®
DESFire smart cards SC.M.E.G2.W
Weatherproof version for external smart card readers, including connection cable (about 1 m long), IP54 .WP
‘Network Inside’ version with integrated Lock Node WN(M).LN.I