Juno 2.0 LED Spiegel DSK Chrystal Juno User Manual
- June 12, 2024
- Chrystal
Table of Contents
Juno 2.0 LED Spiegel DSK Chrystal Juno
Product Information
| No. | Description | Qty |
|---|---|---|
| 1 | Mirror | 1 |
| 2 | Screws | 4 |
| 3 | Bracket | 2 |
| 4 | Dowels | 4 |
Product Usage Instructions
To hang the Chrystal Juno 2.0 (45×75) mirror, follow these steps:
- Identify a suitable location on the wall for mounting the mirror.
- Using the provided screws, attach the brackets to the back of the mirror.
- Measure and mark the desired position on the wall for the mirror.
- Drill holes into the marked positions on the wall and insert the dowels.
- Align the brackets with the dowels and secure them to the wall using the screws.
- Ensure that the mirror is securely attached to the wall.
Operating instructions
| No. | Description | Q -ty |
|---|---|---|
| 1 | Mirror | 1 |
| 2 | Screws | 4 |
| 3 | Bracket | 2 |
| 4 | Dowels | 4 |
Dear Customer,
We thank you for the trust you put in our products! Read these instructions
for use carefully before using the product for the first time! These
instructions contain all information necessary to safely use this product and
provide for its extended lifespan. Please make sure to observe all safety
information included in these instructions!
Safety instructions
- The light may be installed indoors only.
- To operate this product safely, the user must have read and understood these instructions for use before using the product for the first time.
- The product may not be used unless it is undamaged and functions properly. If the product or parts of it have become defective, have it repaired by a specialised technician.
- When drilling in walls, ceiling or floors, pay attention to any installed cables as well as gas and water lines.
- The electrical connection may be carried out only by a suitably qualified electrical specialist.
- Use only connection clips authorised by the manufacturer.
- For operation of the device in the bathroom, the safety distances must absolutely be adhered to (- fig. 1).
- It must be ensured the people who are in the bathtub or shower cannot reach the device.
Installation
Risk of fatal injury due to electric shock!
The electrical connection may be carried out only by a suitably qualified electrical specialist. Before installation. it must be ensured that there is no current to the electrical network (switch o fat main switch or remove fuse).
Cleaning
- Clean the product with a cloth dampened slightly with clean water (with the addition of a mild cleaning agent if necessary). Wipe dry.
- Do not use any sharp or abrasive objects, or aggressive cleanina agents
Disposal
Disposing of the product
Products which are labelled with the adjacent symbol must not be disposed of
in household rubbish. You must dispose of such old electrical and electronic
equipment separately
Disposing of the packaging
The packaging consists of cardboard and correspondingly marked plastics that
can be recycled. Make these materials available for recycling.
Malfunctions and troubleshooting
Danger of physical injury and death!
Improperly conducted repairs may prevent your product from working safely.
Such repairs will endanger you and your surroundings.
Technical data
- Light
- Illuminant
- Protection class
Warranty
- 2 years warranty time
LED strip replacement help
DSK GmbH
- Rögen 52, DE – 23843 Bad Oldesloe
- Tel: +49 (0)4531 16 16
- Fax: +49 (0)4531 16 17 00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>