Su scon SGN Series Aluminum Electrolytic Capacitors Owner’s Manual

Su scon SGN Series Aluminum Electrolytic Capacitors

Product Usage Instructions

1. Make sure to follow the specified operating temperature range for the capacitors.
2. Choose the appropriate rated voltage from the available options (6.3V, 10V, 16V, 25V, 35V, 50V, 63V to 100V).
3. The leakage current should be within the specified limits.
4. The dissipation factor (tanδ) should not exceed the maximum values mentioned in the specifications.
5. The capacitors have a long life, but it is recommended to perform load life and shelf life tests for optimum performance.
6. Ensure that the product is AEC-Q200 Compliant and RoHS Compliant for compatibility with automotive applications and environmental regulations.
7. For further details and judgment standards, refer to the product catalog.

• Anhydrous product
• High ripple current, ultra low impedance at high frequency range
• Long life
• AEC-Q200 Compliant
• RoHS Compliant

SPECIFICATIONS

(After 2 minutes application of DC rated voltage at 20℃)

Dissipation Factor (tan δ)

| Measurement Frequency:120Hz. Temperature: 20℃
Rated Voltage(V)| 6.3| 10| 16| 25| 35| 50| 63~100
tanδ（Max)| 0.24| 0.20| 0.16| 0.15| 0.12| 0.10| 0.09
When nominal capacitance over 1000µF, tanδ shall be added 0.02 to the listed value with increase

of every 1000µF.

Low Temperature Stability| Measurement Frequency:120Hz

Impedance Ratio(Max)

| Rated Voltage(V)| 6.3| 10| 16| 25| 35| 50| 63~100
Z(-25℃) / Z(20℃)| 2| 2| 2| 2| 2| 2| 2
Z(-55℃) / Z(20℃)| 3| 3| 3| 3| 3| 3| 3

Load Life

| The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied for 5000 hours (ΦD≦6.3: 2000 hours;

ΦD=8: 3000 hours; ΦD=10: 4000 hours) at 105℃.

Capacitance Change| within ±25% of lnitial Value
tan δ| 200% or less of lnitial Specified Value
Leakage Current| lnitial Specified Value or less

Shelf Life

| The following specifications shall be satisfied when the capacitors are restored to 20℃ after
exposing them for 1000 hours 105℃ without voltage applied. Before the measurement, the
capacitance shall be preconditioned by applying voltage according to them 4.1 of JIS C5101-4.
Capacitance Change| Within ±20% of lnitial Value
tan δ| 200% or less of lnitial Specified Value
Leakage Current| lnitial Specified Value or less
Standards| JIS C 5101-4-1 (IEC 60384)

Frequency Coefficient of Permissible Ripple Current

• The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise.
• When long life performance is required in actual use, the rms ripple current has to be reduced.

DIMENSIONS

DIMENSIONS(mm)

Electric Characteristics

Su ,scon **P/N| Cap. (uF)| Cap. Tol.**

(%)

| Rate Volt.

(V-DC)

| Surge Volt.

(V-DC)

| Oper. Temp.

( ℃ )

| Nominal Case Size

*DL(mm)**

| Leakage Current

Max (uA)

| D.F. MAX

(%)

| R.C 100KHz

(mA rms)

| IMP 100KHZ

at 25 ℃ (Ω)Max

| Load Life

(hours)

---|---|---|---|---|---|---|---|---|---|---|---
SGN050M101G16PE50S00R| 100| ±20| 50| 63| 105| 10*16| 50| 10| 553| 0.180| 4000

REMARKS

1. Dissipation Factor Test: at 20℃, 120 Hz
2. Capactitance Test: at 20℃, 120 Hz
3. Ripple Current Test: at 105℃, 100K Hz
4. Leakage Current: Initial specified value or less
5. When have characteristic requested: Load life & shelf life test and etc., judgment standard reference to our catalogue.

Contact Information

US Contact Information

• Tony Yang Lumimax Optoelectronic Technology
• Tel: +1 510 241 9686
• Mobile: +1 510 364 7157
• Email: tony.yang@lumimaxusa.com

DONG GUAN KUAN KUN ELECTRONIC CO., LTD

• YIN HE INDUSTRIAL ZONE, QING XI TOWN,
  • TEL: +86-769- 87318000
• DONG GUAN CITY, GUAN DONG CHINA (P.R.O.C)
  • FAX: +86-769- 87318008

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>