acer QG240Y Gaming Monitor User Guide
- June 12, 2024
- Acer
Table of Contents
Acer LCD Monitor Quick Start Guide (QSG)
QG240Y Gaming Monitor
Important safety instructions
Please read the following instructions carefully.
-
To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location.
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
• Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. -
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
-
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
-
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
-
Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the LCD monitor outside this range may result in permanent damage.
-
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
PACKAGE CONTENTS
Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future.Attaching the monitor to the base
- Unpack the box. Take out the styrofoam and accessories.
- Remove upper styrofoam and monitor’s protected bag.
- Take out the bracket and place it on the machine shaft and fix it with two screws.
- Take out the base, align it with the bottom of the stand, and fix it with two screws.
- Flip the LCD monitor over to make it stand upright on the desk where it will be used. (Note: Do NOT press the screen to avoid damage any time.)
Connecting Your Monitor to a Computer
-
Make sure both the monitor and computer are powered-OFF.
-
Connect VGA Cable (Only VGA-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA cable to the computer. -
Connect HDMI Cable (Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer. -
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
…………………
Note:
- The audio output function depends on models. Please refer to User’s Guide for more information.
- VGA: 1920×1080 supports 60Hz.
HDMI: 1920×1080 supports 100Hz.
External Controls
No. | Item | Description |
---|---|---|
1 | Power button | Power on/Press more than 5 seconds to turn off the power. |
2 | Exit/Left button | Exit or return to the previous menu. |
3 | Down button | Move down in the menu. |
4 | Menu button | Enter sub-menus. |
5 | Up button | Move up in the menu. |
FreeSync (HDMI Only):
It can allow a FreeSync supported graphics source to dynamically adjust
display refresh rate based on typical content frame rates for power efficient,
virtually stutter free and low-latency display.
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CE declaration of Conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the
essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of ecodesign requirements for energy-related product.
Notice:
In order to prevent damage to the monitor, do not lift the monitor by its
base.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with EMC regulations.
Notice:
Acer monitor is purposed for video and visual display of information obtained
from electronic devices.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified
to comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio
and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void
the user authority, which is granted by the Federal Communications Commission,
to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Notice: Canadian users
Can ICES-003(B)/NMB-003(B)
Disposal of Waste Equipment by Users in Private Household in the European
Union
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
Acer monitor is purposed for video and visual display of information obtained
from electronic devices. The terms HDMI and HDMI High-Definition Mulltimedia
Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States and other countries.
|
---|---
https://eprel.ec.europa.eu/qr/1340482|
https://eprel.ec.europa.eu/qr/1340473
Product Information for EU Energy Label
LCD Monitor Quick Start Guide – 7
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>