Lucande Terrace Lamps Instruction Manual
- June 12, 2024
- Lucande
Table of Contents
Lucande Terrace Lamps
Product Information
- Product Name: Unknown
- Revision: 2.4
- Languages: DE, EN, FR, NL
- Intended Use: The product is used for lighting purposes.
- Packaging: The product and its packaging contain small parts that can be swallowed by children. Keep children away from the product and packaging.
- Safety Regulations: Comply with national installation and safety regulations for the installation, operation, and maintenance of the product. Always note the symbols on the packaging and in the installation instructions.
- Electrical Safety: Never work on the light if a voltage is applied. Always follow general safety instructions and warnings. The electricity supply should only be connected by a trained electrician. Have damaged electrical cables replaced by a trained electrician.
- Installation Requirements: The lights are not suitable for covering with thermal insulation materials. They are also not suitable for direct installation on normally flammable surfaces, only on non-combustible surfaces.
- Cleaning and Maintenance: Before cleaning or maintenance work, ensure that the light is cooled and disconnected from the power supply. Use a dry or lightly moistened cloth for regular cleaning. Avoid using chemicals or abrasive cleaners/scouring agents.
- Disposal: Instructions for disposal are not provided in the text extract.
Product Usage Instructions
- Read the user manual carefully before using the product.
- Ensure that the product is complete and undamaged before use. If any parts are damaged, do not use the product and contact the service address provided.
- Keep the user manual for future reference and pass it on to subsequent owners or users of the product.
- Comply with national installation and safety regulations for the installation, operation, and maintenance of the product. Pay attention to the symbols on the packaging and in the installation instructions.
- Do not work on the light if a voltage is applied. This can be dangerous and lead to electric shock. Always follow general safety instructions and warnings.
- Keep children away from the product and its packaging as they contain small parts that can be swallowed.
- If you are not a trained electrician, do not connect the electricity supply. Only a trained electrician should perform electrical connections.
- Do not cover the lights with thermal insulation materials.
- Ensure that the lights are installed on non-combustible surfaces and not directly on normally flammable surfaces.
- Use the product only for lighting purposes as intended. Any other use can damage the product and cause hazards such as short-circuits, electric shocks, or fires.
- Before cleaning or performing maintenance work, make sure that the light is cooled and disconnected from the power supply. Check that no voltage is present. Use a dry or lightly moistened cloth for regular cleaning. Avoid using chemicals or abrasive cleaners/scouring agents.
Installation instructions
Before using for the first time / Liability notice
Dear Customer,
Unpack the product carefully and check that it is complete and intact. The
light should not be used if there is any damage to the cable, glass or
electrical parts. In such a case, contact the service address named below
immediately.
Read through these instructions carefully. This will help you to avoid errors,
which could lead to a hazard or malfunction. Keep the instructions in case you
have any questions later. Pass on the instructions to each subsequent owner or
user of the product. Ensure that any supplement to the instructions is
enclosed.
The manufacturer cannot be made responsible and/or liable for personal injuries or damage to property caused by:
- incorrect installation
- changes made to the product
- improper use (misuse)
- failure to observe these instructions
Health and safety regulations
Comply with the national installation and safety regulations for the
installation, operation and maintenance. Always note the symbols on the
packaging and in these installation instructions. Refer to the following list
for the precise meanings of the symbols:
- Never work on the light if a voltage is applied. Warning – Danger of death! Always follow the general safety instructions and warnings.
- This product and its packaging contain small parts, which can be swallowed by children. Keep children away from the product and packaging!
- These instructions assume technical knowledge corresponding to that of a person who has successfully completed training in the electrical trade. The electricity supply should only be connected by a trained electrician Have damaged electrical cables replaced by a trained electrician only.
- Caution, risk of electric shock.
- Note on light sources, which are not intended to be replaced by the user.
Notes on the installation sketch
- The smallest distance to illuminated areas (in m).
- The lights are not suitable for covering with thermal insulation materials
- The lights are not suitable for direct installation on normally flammable surfaces (only suitable for installation on non-combustible surfaces).
Intended use/foreseeable misuse
This product is used for lighting. Further information on the intended use is given on the installation sketch p. 9. Do not expose the light to large mechanical loads or stresses or heavy soiling. For safety reasons, you should not change and/or modify the product. Any use other than that described above can damage the product. This can cause hazards such as a short-circuit, electric shock, or fire
Cleaning/maintenance
The light should always be cooled and disconnected from the power supply before cleaning/ maintenance work is carried out! Check that no voltage is present. For regular cleaning, use a dry or lightly moistened cloth and never use chemicals or abrasive cleaner/scouring agent
Notes on disposal
- This light should not be disposed of in normal household waste. It should be handed into a collection point to recycle large electrical and electronic appliances. Please find out about the relevant provisions regarding the separate collection of waste electrical and electronic equipment (WEEE) in your country. Correct disposal of your waste equipment protects the environment and people against potential negative consequences.
- Batteries do not belong in household waste! Used batteries must be handed into the public collection points in your municipality or wherever batteries are sold.
Declaration of Conformity and service address
The light is designed, produced, and tested in conformity with EN 60598 and
fulfills the fundamental safety requirements of the EU Directives 2014/35/EU
and 2014/30/EU. The complete declaration of conformity is available at the
service address named in the following: LUQOM Holding GmbH, Seelbüde 13,
D-36110 Schlitz
020 3514 3658
info@luqom.eu
Subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>