BlulaxaBLULAXA A009597 LED Strip Light Slim Instruction Manual
- June 12, 2024
- BlulaxaBLULAXA
Table of Contents
A009597 LED Strip Light Slim
Instruction Manual
MODEL : 49446, 49571, 49447, 49572, 49448, 49573, 49449, 49570
Please read these instructions and retain them for future reference.
IMPORTANT INFORMATION
- Install only by certified electricians.
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire it not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Before installation, you must carefully check the integrity of the product and accessories.
- Indoor use only
- Maintenance: Dry cloth
- Storage: In dry room, temperature range: -40°C to +70°C
The manufacturer is not liable for damage caused by improper installation,
operation, maintenance or the use of unsuitable tool Please use the supplied
accessories for the installation.
We assume no liability for property damage or personal injury caused by
improper handling or non-observance of the safety instar In such cases, the
guarantee is void, see also below: www.hwh-
electronic.com/garantiebedingungen
Do not make any changes or modifications to the product and its accessories.
We reserve the right to misprints and changes to the product, the packaging or
the operating instructions.
INSTALLATION DIAGRAM
-
Choose the right position, drill two holes (make sure the distance between the holes is no less than 50mm, less than bracket length).
-
Insert the plugs into the drilled holes.
-
Point the hole of the bracket so it is right above the plug, then install the screws to fixate the brackets.
-
Turn off the power and connect the batten to the mains with a waterproof connector or WAGO-connector.
-
Press the lamp body firmly into the mounting brackets to fix the lamp body. Slide the lamp body along the mounting bracket to the desired position as needed.
-
The batten has now successfully been installed.
TECHNICAL DATA
| Power (W) | 10 | I 20 | I 40 | I 50 |
|---|---|---|---|---|
| Input Voltage (V) | 220V – 240V AC | |||
| DF | ≥ 0,5 | ≥ 0,7 | ≥0,9 | |
| CRI | >80 | |||
| Beam Angle (°) | 120° | |||
| IP Rating | IP20 | |||
| Operating temperature (C°) | -25 C to +45 +45°C | |||
| Operating humidity (%) | 10% – 95% | |||
| Luminous efficacy (Im/N) | 120Im/VV |
DIMENSION DATA
| Dimensions | D1(mm) | D2(mm) | L1(mm) |
|---|---|---|---|
| lOW | 24 | 76 | 300 |
| 20W | 24 | 76 | 600 |
| 40W | 24 | 76 | 1200 |
| 50W | 24 | 76 | 1500 |
HWH
HWH Elektronische
Battelle GmbH
Tee center 1
31162 Bad Salzdetfurth| MAIL info@hwh-etectronic.com
WEB www.hwh-etectronic.com
FON +49 (0) 5063 27 12 16
FAX +49 (0) 5063 27 12 12| GF: Wilhelm Hassenpflug, Ellen Hassenpflug
Registration number: HRB 203167
VAT ID: DE133556722
WEEE-Rg-Nr.: 68131480
Status: 11/2022
---|---|---