SYRCAR 666-819A 2.4 Stunt Racing Car Instructions

June 12, 2024
SYRCAR

SYRCAR 666-819A 2.4 Stunt Racing Car Instructions

SYRCAR 666-819A 2.4 Stunt Racing Car Instructions

SYRCAR 666-819A 2.4 Stunt Racing Car - Figrue 1

SYRCAR 666-819A 2.4 Stunt Racing Car - Figure 2

<http://cyltoys.com>


<https://www.gso.org.sa/gcts/p/46622>

The remote control is powered by two 1.5V batteries.
Open the battery cover and install the battery. The LED light is blinking. Press any button to launch 2.4G and connect with the remote control car. If the LED is steady on, you can use the remote control function to control the remote control car.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

The devices has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals