CHRONOKING MANUAL WINDING Watch Instruction Manual

CHRONOKING MANUAL WINDING Watch

Product Information

The CHRONOKING MANUAL watch is a chronograph watch with manual winding capability. It features various watch parts including a chronograph 30 minute hand, running seconds hand, hour hand, minute hand, and chronograph second hand. The watch also has a band, date window, case, pushers A and B, crown, and a dial. The crown has three positions for different functions.

Crown Positions:

• 1. Normal crown position
• 2. Setting the date
• 3. Setting the time

Manual Winding:
To manually wind the watch:

1. Turn the crown clockwise. As you’re winding your watch, you will feel a slight resistance which increases as the tension mounts. Depending on the size of the watch, 20 to 30 forward turns should lead to resistance.
2. Purely manually wound movements require winding at regular intervals, normally on a daily basis, to keep operating. Take care to stop winding this type of movement at the first sign of resistance as damage may result from over winding.

Setting the Date:

1. Pull the crown out to the 2 position.
2. Turn the crown clockwise for date setting.
3. Do not set the date between 9 PM and 3 AM, otherwise the day may not change properly.
4. Push the crown back into the normal 1 position.

Setting the Time:

1. Pull the crown twice out to the 3 position.
2. Turn the crown to set minute and hour hands.
3. Push the crown back into the normal 1 position.

Using the Chronograph:
The chronograph on this watch can measure up to 60 minutes.

1. To start the chronograph: Press the upper pusher A. The chronograph hands will begin to move.
2. To stop the chronograph: Press the upper pusher A again. The chronograph hands will stop and indicate the elapsed time. Read the elapsed seconds on the large central hand and minutes on the sub-dial in the 9 o’clock position.
3. To reset the chronograph: Press the lower pusher B. All the chronograph hands will be reset to the 0 position.

CHRONOKING MANUAL Watch parts

CHRONOKING MANUAL Crown Position

1. Normal crown position
2. Setting the date
3. Setting the time

CHRONOKING MANUAL Manual winding

1. Manual winding
   Turn the crown clockwise. As you’re winding your watch, you will feel a slight resistance which increases as the tension mounts.
   Depending on the size of the watch, 20 to 30 forward turns should lead to resistance.

Purely manually wound movements require winding at regular intervals, normally on a daily basis, to keep operating. Take care to stop winding this type of movement at the first sign of resistance as damage may result from over winding.

CHRONOKING MANUAL Setting the date

1. Pull the crown out t 2o the position.
2. Turn the crown clockwise for date setting. Do not set the date between 9 PM and 3 AM, otherwise the day may not change properly.
3. Push the crown back into the normal 1 position.

CHRONOKING MANUAL Setting the time

1. Pull the crown twice out t 3o the position.
2. Turn the crown to set minute and hour hands.
3. Push the crown back into the normal 1 position.

CHRONOKING MANUAL Using the chronograph

THIS MODEL CHRONOGRAPH FEATURES STOPWATCH THAT CAN MEASURE UP TO 60 MINUTES.

1. To start the chronograph: Press the upper pusher A The chronograph hands will begin to move.
2. To stop the chronograph: Press the upper pusher A again. The chronograph hands will stop and indicate the elapsed time.(Read the elapsed seconds on the large central hand and minutes on the sub-dial in the 9 o’clock position).
3. To reset the chronograph: Press the lower pusher B to reset the chronograph. All the chronograph hands will be reset to “0” position.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>