Biowin ModMi Robot System with App User Guide
- June 12, 2024
- Biowin
Table of Contents
ModMi
Build Freely To Inspire Creativity
STEAM PARENT-CHILD INTERACTION AI COMBINATION
Programming Methods
Teach and play Play interesting robot actions easily
Graphical programming Quick start of the world of programming
Code programming Compatible with advanced programming language, exploring
more applications
Robot+Programming+AI
Basic
module
| T module | Joint Module |
|---|
Range of motion: ±90°
Weight: 100g
I module| Joint Module
Position mode: 0-320°
Velocity mode: Unlimited rotation
Weight: 105g
G module| Clamp Module
Position mode: 0-90° Constant force mode
Weight: 123g
Control module
| F module | IO Port：2 |
|---|
Input voltage: 7.4V
Battery capacity: 1500mAH
Communication : wifi and serial port
Weight: 100g
P module| IO Port：7
Input voltage: 7.4V
Battery capacity: 2500mAH
Communication : wifi and serial port
Weight: 420g
Auxiliary module
| Orthogonal module | 90 ° installation between different modules |
|---|---|
| Bionic foot module | Simulate animal support legs to realize bionic robot |
walking
External sensor| Equipped with a variety of sensors, including gesture
recognition, ultrasonic sensors and infrared sensors.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum
distance 0cm between the radiator and your body.
Foshan Biowin Robot Automation Technology Co., Ltd
: 400-994-0579
: www.biowinedu.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>