Benz Reeds 570486 Digital Reed Strength Tester Instruction Manual
- June 12, 2024
- Benz Reeds
Table of Contents
Benz Reeds 570486 Digital Reed Strength Tester
Product Information
- The Strength Tester is designed to measure the strength of Saxophone and Clarinet reeds.
- It provides accurate measurements and facilitates reed comparison.
- The device operates by pressing a start button and placing the reed on the sensor.
- The measurement is displayed on the screen.
Specifications
- Handling: Reed measurement after cutting, sorting, or sheet comparison
- Accuracy: 0.1 factor for precise measurements
- Size: 73mm x 146mm x 18mm
- Power supply: Rechargeable lithium battery
- Weight: 120g
- Accessories: USB/Mini charging cable
Product Usage Instructions
To use the Strength Tester, follow these steps:
- Press the start button located on the back of the device.
- Hold the Strength Tester firmly and place the reed on the sensor as far as it will go. Please note that the sensor is sensitive and may need to be switched off and on again.
- Press down on the center of the reed until the display shows the strength value.
Ensure the device is adequately charged using the included USB/Mini charging cable before usage.
INSTALLATION INSTRUCTION
- A: Press the start button on the back.
- B: Hold the Strength Tester still and place the Reed on the sensor as far as it will go. The sensor is sensitive, it may be switched off and on again.
- C : Press down on the center of the Reed until the display shows the value.
Specifications
- Handling: Reed measurement aer cung,
- Sorng or sheet comparison
- Accuracy: 0.1 factor for precise measure-
- menus, scale from 0.0 to 10.0
- Size: 73mm x 146mm x 18mm
- Power supply: Lithium battery, rechargeable
- Weight: 120g
- Accessories: USB/Mini charging cable
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>