SeeK thermal FirePRO Series Personal Thermal Imager Instruction Manual

June 12, 2024
Seek thermal

FirePro SeriesSeeK thermal FirePRO Series Personal Thermal
Imager

IMPORTANT SAFETY INFORMATION
READ ENTIRE MANUAL BEFORE USE

How to use these instructions

Ensure that each person who uses the product has read and understood the safety instructions before using this product. Failure to do so can result in serious injury or death.
Follow all the instructions. This will avoid fire, explosions, electric shocks, or other hazards that may result in damage to property and/or severe or fatal injuries. Keep all safety information and instructions for future reference and pass  them on to subsequent users of the product.
Seek Thermal is not liable for cases of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions. In such cases, the warranty will be voided.
For more information contact:
Seek Thermal Inc.
6300 Hollister Ave
Santa Barbara
CA 93117
www.thermal.com
www.thermal.com/support

1.1 Intended use and reasonably foreseeable Misuse
This product is intended to be used as a personal safety aid. Never become wholly dependent on the thermal imager for personal navigation. It is not a night vision camera. Always maintain awareness of location and escape routes when  using this device. Failure to do so may result in serious injury or death.
The product may only be used in accordance with the instructions described in this manual. Any use other than those described in this manual is considered as non-intended use. This will also invalidate the warranty.
1.2 Online documentation
We update our user manuals regularly. The latest version of the documentation is available at the following address www.thermal.com/

1.3 Other Languages
Manuals in other languages are available upon request.

Legal and Warranty

2.1 Export Compliance
The technology utilized in Seek Thermal imagers may be subject to export control regulation by the governments of the USA. Where an export license applies, once obtained by Seek Thermal on behalf of the customer, all parties must  strictly adhere to the terms and conditions pertaining to that license.
Where an export license applies, a copy of the license will be provided to the end user, and the end user must agree to follow all license terms and conditions. As an indicative (but not exhaustive) guide, typical thermal imager End User  License Standard Conditions are reproduced in the next section.
2.2 End User License standard conditions
The end user must always maintain the Item in their possession and is responsible for its security against theft, loss, unauthorized access, or use.
No resale, donation, export, re-export, transfer, or disposal by other means of the Item is authorized. When the Item reaches the end of its service life, it MUST be returned to Seek Thermal.
Sale, resale, loan, or surrender of the Item for any reason is prohibited.
Maintenance of the Item is limited to routine preventative maintenance and installation of field replacement parts only. Disassembly and/or repair of electrical/mechanical assemblies must only be performed by Seek Thermal authorized  personal.
If the Item is lost, stolen, or destroyed, or unauthorized people have access to it, this must be reported to Seek Thermal within 21 days. The report must include a description of the incident, to include as appropriate:

  • Who had physical possession of the item
  • What is being done to recover the item
  • Police incident report number
  • Steps taken to prevent another such event
  • If unauthorized personnel had access to the Item, who allowed this and what has been done to avoid recurrence
    The end user must agree to all conditions set forth in the export license by signing said conditions and returning the signed export license to Seek Thermal prior to shipment of the Item.

2.3 Disclaimer
Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US Export Regulations. Please refer to  thermal.com/support with any questions.

Safety Information

3.1 Explanation of safety warnings
WARNING
Warning indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.
CAUTION
Caution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates information considered important, but not hazard-related.

3.2 Explanation of Graphical Symbols

Symbol Meaning
**** The CE and UKCA marking on the product is the manufacturer’s

declaration that the product complies with the essential  requirements of the relevant European and UK health, safety, and environmental protection legislation.
ROHS: This RoHS-compliant product conforms to the European Union Restriction of the Use of Certain Hazardous  Substances (RoHS) in Electrical and Electronic Equipment.   Seek Thermal ensures RoHS conformance by requiring supplier Declarations of Conformity, monitoring incoming materials, and maintaining manufacturing process controls.
| The symbol on the product, the accessories or packaging indicates that this device must not be treated as unsorted municipal  waste but must be collected separately.
Li-ion| Lithium-Ion batteries contain elements that may pose health risks to individuals if they are allowed to leach into the ground  water supply. In some countries, it may be illegal to dispose of these batteries in standard household waste. Fortunately, many recycling facilities exist that process lithium-ion batteries, in part due to the value of the materials contained within the  individual cells. In the United States and Canada, a large network of over 30,000 battery drop-off locations may be found at www.call2recycle.org.

3.3 Equipment Ratings

Battery Material Lithium-ion
Nominal Voltage 3.6 V
Nominal Capacity 3500 mAh
Environmental Intended for wet locations (camera)

Intended for outdoor use (camera)
Intended for indoor use (charger)
10 ” 95 % RH, non-condensing
Overvoltage Category OCV: 1
Pollution Degree 2
Altitude| Camera: 5000m. Desktop: 5000m (Warning:
Overall altitude is dependent upon the altitude
rating of the AC/DC adapter used to provide the
5Vdc source).
Operation and Storage
Temperature| Storage: -20°C to +60°C
During discharge: -20°C to +60°C
During Charge: 0°C to +45°C
Charger Input Rating| 5VDC, min 1.0A (USB Type C connection)
Only for use with a USB AC/DC charger or USB
computer host with a 5Vdc output which is
rated LPS or Class II.
IP Rating| IP67 (camera), IP20 (charger)

3.4 Safety Instructions
Read and understand this manual and its safety instructions before using this product. Failure to do so can result in serious injury or death.
Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including  interference that may cause undesired operation.
Notice: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,  including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
Note: Modifications or changes to this product may void the FCC authorization to operate this equipment.
WARNING
The thermal imager is not life support equipment and should not be used as such. Users of thermal imagers, regardless of brand or type, are required to read the operating manual prior to use.
WARNING
The thermal imager must only be used by authorized personnel familiar with and trained on the uses, proper operation, features, and full functionality of the thermal imager, including training in simulated fire conditions such as controlled live burn simulations. This includes understanding thermal images and how they are interpreted.
WARNING
The thermal imager is a complex electro-optical device, and just like any other machinery, electronic systems are subject to potential failures. If a failure occurs, the user will no longer have access to the thermal imagery provided by the  thermal imager. Tactical use of this equipment must not deviate from standard operating procedures used by personnel who do not have the benefit of the equipment. Failure to follow your fire department’s standard operating  procedures in a hazardous atmosphere could result in disorientation, serious injury or death should equipment failure occur.
WARNING
Never use the thermal imager as the sole source of navigation. If system failure occurs, you may become disoriented or lost in a hazardous environment which could result in serious injury or death.
WARNING
Failure to exit a hazardous environment immediately on observation of the low battery warning may result in system failure in a hazardous environment which could result in serious injury or death.
WARNING
Do not disassemble or modify the battery used with this device. The battery contains safety and protection devices which, if damage occurs, can cause the battery to become hot or cause an explosion or ignition.
CAUTION
Stop using the camera if it becomes abnormally hot, or shows signs of odor, discoloration, deformation, or abnormal conditions is detected during use, charge, or storage.
CAUTION
It is important to test the thermal imager and any other associated accessories prior to use to ensure that the equipment is functional before entering a hazardous environment. Always perform a visual and functional check on the  equipment to validate that it has not been damaged or degraded prior to use.
CAUTION
Do not continue to charge the battery if it does not become charged in the specified charging time. If you continue charging the battery, it can become hot or cause an explosion or ignition, potentially causing injury.
CAUTION
Stop using the camera if the enclosure becomes cracked, swollen or shows any other signs of misuse. Discontinue immediately and promptly dispose of unit.
CAUTION
Do not charge the thermal imager in a hazardous location.
CAUTION
Only use a Seek Thermal specified battery charger when you charge the battery. otherwise, damage to the battery can occur.
CAUTION
Leaving the flashlight on with the FirePRO in the charger, without the charger power engaged, can lead to damage to charger. Ensure LED is powered off.
CAUTION
Do not put the thermal imager directly into a fire or increase the temperature of the battery. Do not leave the unit in direct sunlight for extended periods of time. Damage to battery can occur.
CAUTION
Do not point the infrared camera at strong energy sources, for example, devices that cause laser radiation, or the sun. This can affect the accuracy of the camera and cause damage to the detector.
NOTICE
Contact your dealer for servicing by authorized personnel. The thermal imager contains no user-serviceable components.
NOTICE
The thermal imager will not provide images through glass, water, or shiny objects. These surfaces act like mirrors to the thermal imager.
NOTICE
When using the thermal imager in a cold environment (below 0˚C/32˚F), the maximum temperature that the thermal imager can detect is lowered, until the unit reaches an internal nominal temp of (20˚C/68˚F). Be aware that colorization and temperature readings may not be accurate under these conditions.
NOTICE
For best performance and accurate scene colorization, always store the thermal imager indoors or in a room temperature environment (20˚C/68˚F).
Do not leave the thermal imager exposed to cold environments.
NOTICE
Repeated exposure to high temperature environments without adequate periods for the unit to self-cool may result in degradation or loss of the thermal image or damage to the internal components. Be sure to allow adequate cool- down  periods between high temperature exposures.
NOTICE
The service life of the thermal imager depends in part on how it is used and the environmental conditions in which it is used. Under heavy usage, or under extreme environmental conditions, the service life of the equipment may vary.
NOTICE
Battery lifespan can vary greatly depending on prolonged exposure to hot and cold environments.

Disposal

4.1 Disposal of electronic components
Dispose of the device via a collection point for the recycling of waste electrical and electronic equipment if you live within the EU and in other European countries that operate separate collection systems for waste electrical and electronic  equipment. By disposing of the device in the proper manner, you help to avoid possible hazards for the environment and public health that could otherwise be caused by improper treatment of waste equipment. The recycling of materials  contributes to the conservation of natural resources.
4.2 Disposal of packaging waste
The packaging is made of environmentally friendly materials, which may be disposed through your local recycling facilities. By disposing of the packaging and packaging waste in the proper manner, you help to avoid possible hazards for  the environment and public health.
4.3 Disposal of batteries
The product contains a battery. Batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazard our waste regulations. For this reason, dispose of used rechargeable batteries  at a local collection point.

Customer and Product support

For any questions or issues with the use of this product, do not hesitate to
contact our customer support group at:
Seek Thermal Inc.
6300 Hollister Ave
Santa Barbara
CA 93117
www.thermal.com
www.thermal.com/support
5.1 Quality Assurance
The Quality Management System under which this product was developed and manufactured complies to the ISO 9001 Standard. Seek Thermal Incorporated reserves the right to make changes and improvements on any of the products without prior notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals