mafiti MX-XJ15 Walkie Talkie User Manual
- June 12, 2024
- mafiti
Table of Contents
MX-XJ15 Walkie Talkie
User Manual
- The manual contains important information please keep it for future use
Product Parts Display
Start Guide
- The right side of the walkie-talkies is the Turn ON/OFF key. Push up to turn on, and push down to turn off.
- The left side of the walkie-talkies is the PPT key. Press the key while speak- ing, and release when finished.
- The power indicator is blue light after booting.
- When the battery of the walk- ie-talkies is low, please use type-c charging cable to charge.
- Adapter specification: DC 5V/1A. Charging must be done by an adult.
Main Specifications
| Frequency | 400-470MIlz |
|---|---|
| RF output power | c 0. 5W |
| Operating Voltage | 3. 7V |
| Communication distance | 400-1000M |
(Depends on the environment)
Number of channels (simplex)| 1
Frequency stability| ±5ppm
Charging Voltage| DC5V—1A
Charging Time| 1h
Working Time| 20h
- In the process of compiling this manual, our company strives for the accuracy and completeness of the content, but we do not assume any responsibility for the possible errors or omissions.
- Our company reserves the right to change product design and specifications. Due to the continuous development of technology, product design and specifications are subject to change without notice.
WARNING
- Contain small parts, not suitable for children under 3 years old.
- The package must be taken out by the adult and the kids walkie-talkies must be used under the direct supervision of adults.
- The kids walkie-talkies can only be charged with the equipped adapter (Adapter specification: DC 5V-1A).
- Keep out of the fire when using the walkie-talkies.
- When using the walkie-talkies, please check the shell and other parts regularly for damage. If the damage is found, please stop using it immediately until the repair is complete.
- If the walkie-talkies is disintegrated, broken or deformed, do not let children use it to avoid accidental swallowing, choking and other injuries.
- Maintenance method: The electrical components of this product must not be exposed to water or placed in a humid environment. Please wipe the surface stains with a dry cloth.
User Safety Information
In order to use this product safely and efficiently, please read the following safety information carefully.
- Turn off the walkie-talkies before entering a flammable and explosive environment.
- Do not charge the battery in a flammable or explosive environment.
- Do not expose the walkie-talkies to direct sunlight for a long time or put it near the heating device.
- The walkie-talkies does not have full waterproof performance, please keep it dry.
- When the walkie-talkies is transmitting the signal, please keep it in a vertical position and speak near the microphone.
- If you wear the walkie-talkies on your body, please make sure that the antenna is at least about 5 cm away from your body when the walkie-talkies is transmitting the signal.
- Do not use the walkie-talkies with damaged antenna. The damaged antenna may cause slight burns if it touches the skin.
- Maintenance of the walkie-talkies should only be carried out by professional technicians, do not disassemble and assemble the walkie-talkies by yourself.
Attention
This radio complies with IEEE and ICNIRP exposure limits for General
Population/Uncontrolled RF exposure environment at operating duty factors of
up to 50% and is authorized by the FCC for General Population/Uncontrolled use
only. An appropriate warning label is affixed to all units. In order to comply
with RF exposure requirements, a minimum distance of 2.5 cm must be maintained
when held-to-face, and body-worn operations are restricted to the approved
original accessories (belt clip), a minimum distance of 0 cm. Do not use this
device when antenna shows obvious damages.
This product is compliance to FCC RF Exposure requirements and refers to FCC
website https://apps.fcc.gov/oetcf/eas/reports/-GenericSearch.cfm search for
FCC ID: 2AQXTMX-XJ15 to gain further information include SAR Values.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Made in China
Documents / Resources
|
mafiti MX-XJ15 Walkie
Talkie
[pdf] User Manual
2AQXTMX-XJ15, 2AQXTMXXJ15, MX-XJ15 Walkie Talkie, MX-XJ15, Walkie Talkie
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>