4BABY STINGER Pro Baby Stroller User Manual

STINGER Pro Baby Stroller
User Manual

STINGER Pro Baby Stroller

PARTS LIST {pic. 1)
1. BUMPER1
2. CUP HOLDER1
3. CANOPY 1
4, FRAME1
5. REAR WHEELS2
6. FRONT WHEELS2
OPEN THE STROLLER (pic. 2-6)
2. Push the lock to the outside of the stroller as pic. 2, and at the same time pull up the handle with the other hand to unfold the stroller.
3. When the stroller is opened as pic. 3, you should hear “click” sounds on both side of the stroller, please examine if the stroller is locked in safety position before you use it.
4a. Insert the bumper on both sides of the seat as pic. 4a.
Note: please make sure to lock the bumper in place when you heard a “click“sound.
4b. Insert the hood plastic into the seat as pic. 4b.
Sa. Take out the front wheels, insert the vertical shaft into the plastic hole on the wheel seat as pic. 5a, until it is locked, install the other side of the front wheel in the same way
Sb. Take one side of rear wheels, insert the rear axle into the plastic hole as pic. 5b, until it is locked, install the other side of the rear wheel in the same way.
6. Assembled all the parts of the stroller.
FUNCTION (pic. 7-12)
7a. Rotate the front bumper from left to right.
7b. Rotate the front bumper up and down.
8. Open or close the canopy as pic 8 indicate.
9. Pull the back rest lock ,and at the same time to adjust the angle of the back rest.
10a. Lift up the plastic button on the front wheels to lock it not rotated at 360 degree, press down the plastic button to release it can be rotated at 360degree as the arrow in the pic. 10a.
10b. Disassemble the front wheels, press the small metal pins as arrow pic.10b, at the same time use your hand to pull out the front wheel as arrow indicated to finish disassemble.
FUNCTION (pic. 7-12)
11a. Pull the rear wheel express iron as arrow down indicated, remove the rear wheel in the direction of arrow left then finish the disassemble.
11b. Step down the brake pedal to brake the stroller, lift up the pedal to release the brake as pic. 11b.
Warning : Always lock the brake when put or carry a child.
12. Pull the button as arrow in the pic. 12 to adjust the footrest in 3 position.
FOLD THE STROLLER (pic. 13-14)
13. Press the second lock and at the same time press the folding button on the handle
as pic. 13b indicated to unlock the stroller, then push the handle forward with slightly
strenth with your other hand handle the folding tube under the seat as pic. 13d indicated,
pull the stroller up by holding the folding tube under the seat as pic. 13¢ indicated
to fold the stroller.
14, After the stroller is fully folded the folding lock locked automatically, lift the stroller
up to finish the folding.
USE THE SAFETY BELT (pic. 15a~15c)
15. There are 2 position for safety belt, the up position is suitable for one baby more than 6 months, the bottom position is suitable for one baby under than 6 months. Click the buckel to lock the safety belt on both sides as pic. 15a.
Press the middle button to release the safety button as pic. 15b.
You can adjust the length of the seat belt by pulling the safety buckle on both sides as needed pic. 15c.

WARNINGS

WARNING: Always lock the brake when put or carry a child.
WARNING: Leaving the baby without care may cause a danger.
WARNING: Use the braces when the baby begins to sit at his own.
WARNING: Before use be sure that the assembling mechanisms are blocked.
WARNING: Always use the crotch belt together with the help belt.
WARNING: Every load handing on the handle affects its stability.
WARNING: This product is not designated to go roller blades or to run.
WARNING: This stroller is indented to bear only one baby.
WARNING: This stroller is designated for the babies up to 0-48 months and weight 22 kg.
WARNING: Do not leave the stroller with a baby on the slope, even if the brake is locked.
WARNING: Do not use the stroller, if any component is damaged.
WARNING: During the assembling and disassembling the stroller, be sure that the baby is at the safe distance.
WARNING: Making any adjustments, make sure that the movable parts are not close to the baby’s body.
WARNING: Always lock the brake when stops.
WARNING: Maximum load of basket is 3 kg.
WARNING: Maximum load of bag is 2 kg.
WARNING: Every bag or other load handing on the handle affects its stability.
WARNING: Only the original parts, confirmed by the producer should be used in this product.
WARNING: Driving on the pavement or any other step the front axle should be lifted.
WARNING: Do not drive the stroller through the stairs.
WARNING: The stroller should be kept away from babies.
Pr EN1888-1&2:2018
WARNINGS FOR PUSHCHAIRS 6 MONTHS TO 22 KG
IMPORTANT – Please read these instructions carefully before use and keep them for later reference.
WARNING – Never leave your child unattended.
WARNING – Ensure that all the locking devices are engaged before use.
WARNING – To avoid injury ensure that your child is kept away when unfolding and folding this product.
WARNING – Do not let your child play with this product.
WARNING – Use a safety belt as soon as the child is able to sit independently (with pushchair attachments with a length of more than 800mm).
WARNING – Always use the restraint system.
WARNING – Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
WARNING – This product is not suitable for running or skating.

IMPORTANT INFORMATION

• This pushchair is suitable for 1 child to a body weight of 22 kg.
• If used for a newborn, it is highly recommended to use the lowest position of the backrest, or rather the lying position.
• The parking brake shall be engaged when placing and removing the child.
• The maximum loading weight for the basket is 3 kg.
• The maximum loading weight for cup holder, bags and storage compartments shall not exceed 1 kg.
• The maximum capacity of all load is 3 kg.
• Any load attached to the handle and on the back of the backrest and on the sides of the pushchair will affect the stability of the pushchair.
• This pushchair has been designed for one child and shall be used for the transport of one child only.
• Accessories which are not approved by the manufacturer shall not be used.
• A pushchair attachment with a length of less than 800mm (carrycot) is suitable for a child who is not able to sit up, turn around and lever himself/herself on his/her knees or hands independently. Maximum weight of the child: 9 kg. An additional mattress is not approved.
• Only use original spare parts which are offered or recommended by the manufacturer!
• Using an additionally purchased platform is not recommended.
• Car seats that are used in combination with a chassis do not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
• Always apply the parking brake as described and depicted when parking the push- chair.
• Always use the crotch strap in combination with the waist belt.
  «EN 1888:2018

CARE AND MAINTENANCE

• Please note the textile designation.
• Please check on a regular basis that the brakes, wheels, latches, connecting elements, belt systems and seams are properly functional.
• Do not expose the product to strong sunshine.
• After use in rain or snow, the wheels should be lubricated and the vehicle dried to prevent rust.
• Care for, clean and check this product regularly.

4 BABY Sp. z o.o.
Kasprowicza 72, 20-232 Lublin, Poland
tel. +48 81 746 15 80
e-mail: info@4baby.pl

www.4baby.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>