Netzu 5266 Digital Alarm Clock Instruction Manual
- June 24, 2024
- Netzu
Table of Contents
Netzu 5266 Digital Alarm Clock
OVERVIEW
Congratulations on your purchase of this colorful nightlight alarm clock. This colorful nightlight alarm clock has a dual alarm, two nightlight modes,12/24H format selection, snooze, and brightness control function. With its simple user interface, large LED-digital display, colorful nightlight adjustment, and large snooze button, your morning wake-up will be much easier than ever before. Enjoy a comfortable wake-up with the repeating snooze option, and experience zero stress when setting the time or alarm. Please take time to read and understand this manual, so you can begin to enjoy the convenience and features of this product.
DIAGRAM
- Alarm Volume Selection
- Time Setting
- Alarm!
- Alarm2
- Brightness Control
- Type-C USB Port
- –
-
- USB Charging Port
- USB Charging Port
- Warm Nightlight Brightness Adjustment
- Snooze/Nightlight On/Off
- Colorful Nightlight Selection
POWER ON
Plug one end of the Type-C USB cable into the USB port of the product, and connect the other end to the DC5V 2A adaptor. Then plug the adaptor into the power, and the clock starts to serve. Pull out the insulation at the rear of the clock.
Note: The button battery is not for power supply, it only keeps the alarm clock memory function.
TIME SETTING
-
Time Setting In time mode, press and hold button until the “Hour” blinks, press [+]or [ – ] button to adjust the hour, then press to save; and the “Minute” will blink, press [+]or [ -] button to adjust the minute, then press to save, the time is set.
Note: -
Press and hold [+]or [ -J button to quickly adjust.
-
10 seconds without any operation will automatically confirm and back to the time display mode.
-
12/24 Hour Format Switching
In time mode, press [ ] button to choose 12/24 hours. If the 12H format is selected “AM/PM” will display on the screen.
ALARM SETTING
-
Alarm 1 Setting In time mode, press and hold [ ] button until the “Hour” blinks, then press the [+] or [-] button to adjust the hour, press [ ] to save, and “Minute” will blink, press [ + ] or [-] button to adjust the minute, press to save, icon will display on the screen, and the alarm 1 is set.
Note:- Press and hold the button to quickly adjust.
- The alarm setting will be confirmed within 10 seconds it no operations.
-
Alarm 2 Setting In time mode, press, and hold [ ] to enter the setting of alarm2, then please refer to the alarm setting to set alarm2, after the alarm2 setting is completed, the alarm icon “ ” will display on the screen.
-
Turn On/Off Alarm Press button to turn on or off the corresponding alarm clock.
- ON: icon will display on the screen.
- OFF: icons will disappear on the screen.
-
Alarm Volume Adjustment Pull the alarm volume button to adjust the proper volume and it have three levels volume can be adjustable (High/Middle/Low).
-
Stop Alarm
-
When alarm is sounding, the corresponding alarm icon blinks.It will stops after 3 minutes if no any operation, and then rings again for 3 minutes after 7 minutes, and stops ringing after three cycles.
-
When alarm is sounding, press any button except [Snooze/Nightlight] button to stop the alarm. And it will sound on next day.
Note: When the alarm sounds, the nightlight will automatically turn on (when the nightlight is off status), the alarm stop ringing, and the night light will go out.
SNOOZE FUNCTION
(Snooze time :9 Minutes)
- Snooze Function When alarm is sounding, the alarm icon blinks, press the [Snooze/Nightlight] button to enter snooze function and temporarily stop the alarm ,the “ ” icon will blink on the screen, the alarm will sound again 9 minutes later.
- Turn Off Snooze Function When the snooze is on, press any button except [Snooze/Nightlight] button to turn off snooze, the icon “Zzz” disappears from screen .
BRIGHTNESS ADJUSTMENT
- Push the button to adjust the screen brightness from 0% to 100%.
NIGHTLIGHT FUNCTION
-
Turn On/Off Nightlight Press [Snooze/Nightlight] button to turn on/off nightlight.
Note: The default light is warm light mode(Middle light). -
Warm Light Mode Adjustment (Touch Button) In nightlight mode,touch ” warm light ” button to adjust warm light brightness. (Total three levels can be choose high,middle and low. The default is middle light).
-
Colorful Light Mode Adjustment (Touch Button) In nightlight mode,touch ” LiGHt” button to choose nightlight color (Total eight colors mode can be choose red, orange, yellow, green, cyan, blue, purple and gradient color).
MEMORY FUNCTION
- The colorful nightlight clock has backup button battery (CR2032 )to memory the alarm setting, brightness and nightlight setting during power outage and keep the time running.
USB CHARGING
- Connect one end of the USB charging cable to the product, and the other end to you digital devices, such as smart phone.
FACTORY MODE SETTING
- Open the battery cover and re-install the battery to restore the factory mode.
- Default time format: 12-hour (icon “AM” is display )
- Default time: AM 12:00
- Default alarm time: 6:00
- Default light brightness: Middle Light
SPECIFICATIONS
- Time errors: 30 seconds/month
- Alarm: 2 groups
- Battery type: 1*3V 2032 button battery (included)
- Input power: 5V 2A
- Product size: 174.590.3582.6mm
- Product weight: 249g
PACKAGE CONTENT
- 1* Colorful Nightlight Clock
- 1* Manual
- 1* Type-C Cable
- 1* Adapter
SAFETY INSTRUCTIONS
When using the product, please pay attention to the following safety instructions.
- The manufacturer will not be responsible for the product damage caused by improper use or handing of the product.
- Please use the factory standard power adaptor and cable that come with the product.
- Please keep the product away from heat sources, such as radiator, stove, heater, or any other heating products.
- Please do not use the product in or near water, nor in areas with high humidity, such as the lavatory, please do not immerse the product in water to avoid electric shock and damage to the product.
- Please do not too much force or shake the product, please do not put the product in extreme temperature or humidity.
- Use a lightly wet cloth to wipe the product, please cut off the power before clean the product. please do not clean with liquid cleaners, benzene, paint thinner or aerosol.
- Please do not wipe or scratch the screen with hard objects.
BATTERY WARNING
- The product uses one piece CR2302 button battery to keep the clock memory function. Please replace the battery if you find the memory function does not work.
- Please do not put battery in overheated environment, such as direct sunlight, fire etc.
- Battery is not household waste! Expired battery must be discarded in a manner that protects the environment and complies with regulations.
- Do not ingest battery, chemical burn hazard. If swallowed by mistake, seek medical advice immediately.
- Battery cannot be recharged or activated in other way, nor can they be dissembled, thrown into the fire.
- Keep new and used battery away from children.
- If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
FREQUENTLY ASKED QUESTIONS
How do you set the alarm time on the Netzu 5266 Digital Alarm Clock?
Setting the alarm time on the Netzu 5266 Digital Alarm Clock involves using the intuitive buttons to adjust and confirm the desired wake-up time.
What does the snooze feature on the Netzu 5266 Digital Alarm Clock do?
The snooze feature on the Netzu 5266 Digital Alarm Clock lets you temporarily silence the alarm for a few extra minutes of sleep before it sounds again.
How loud can you set the alarm volume on the Netzu 5266 Digital Alarm Clock?
The Netzu 5266 Digital Alarm Clock offers adjustable alarm volume settings, allowing you to set it to a comfortable level that suits your preference.
What material is used for the frame of the Netzu 5266 Digital Alarm Clock?
The frame of the Netzu 5266 Digital Alarm Clock is made from durable Acrylonitrile Butadiene Styrene (ABS) material, known for its strength and resilience.
How large is the display of the Netzu 5266 Digital Alarm Clock?
The Netzu 5266 Digital Alarm Clock features a generously sized display, measuring approximately 6.89 inches wide by 3.6 inches high for clear visibility from a distance.
What makes the Netzu 5266 Digital Alarm Clock a reliable choice for daily use?
The Netzu 5266 Digital Alarm Clock stands out for its combination of large display, adjustable brightness, snooze function, and customizable alarm volume, making it an ideal companion for daily wake-up routines.
Does the Netzu 5266 Digital Alarm Clock have an automatic time-setting feature?
The Netzu 5266 Digital Alarm Clock operates manually, requiring users to set the time and other settings directly using the control buttons provided.
How does the Netzu 5266 Digital Alarm Clock compare to similar models in terms of price and features?
Priced competitively at $14.99, the Netzu 5266 Digital Alarm Clock offers a robust set of features including a large display, snooze function, adjustable brightness, and reliable alarm capabilities, making it a cost-effective choice for budget-conscious consumers.
Why does the display on my Netzu 5266 Digital Alarm Clock keep flashing?
The display on your Netzu 5266 Digital Alarm Clock may flash due to a power interruption or after being reset. Ensure that the power cord is securely connected or replace the batteries if using battery power.
How do I fix the issue of my Netzu 5266 Digital Alarm Clock not sounding the alarm?
To fix this issue, verify that the alarm is turned on and the volume is set appropriately on your Netzu 5266 Digital Alarm Clock. Also, check the AM/PM settings and ensure the clock is receiving power.
Why is the sound on my Netzu 5266 Digital Alarm Clock too low to wake me up?
If the sound is too low, adjust the alarm volume on your Netzu 5266 Digital Alarm Clock. There might be a volume control button or knob that you can increase to make the alarm louder.
How can I stop my Netzu 5266 Digital Alarm Clock from losing time?
To prevent your Netzu 5266 Digital Alarm Clock from losing time, ensure it is connected to a stable power source. If it's battery-operated, replace the batteries with new ones.
What should I do if the buttons on my Netzu 5266 Digital Alarm Clock are unresponsive?
If the buttons are unresponsive, try resetting your Netzu 5266 Digital Alarm Clock by unplugging it and removing the batteries for a few minutes, then reconnecting the power. If the issue persists, the clock may need servicing.
How do I resolve the issue of my Netzu 5266 Digital Alarm Clock not turning on?
If your Netzu 5266 Digital Alarm Clock is not turning on, check the power source. Ensure it is properly plugged in or replace the batteries. If the problem persists, there may be an internal fault.
How do I fix the time setting on my Netzu 5266 Digital Alarm Clock if it keeps resetting?
If the time keeps resetting on your Netzu 5266 Digital Alarm Clock, ensure it is connected to a reliable power source. If it's battery-operated, replace the batteries. A power surge protector can help if you're experiencing frequent resets.
DOWNLOAD THE PDF LINK:Netzu 5266 Digital Alarm Clock Instruction Manual