acer Nitro XV2 LCD Monitor User Guide

: June 12, 2024
: Acer

Table of Contents

acer Nitro XV2 LCD Monitor
Product Information
Product Usage Instructions
Important safety instructions
Attaching the monitor to the base
Connecting your monitor to a computer
External controls
FCC notices
SPECIFICATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

acer Nitro XV2 LCD Monitor

Product Information

The Acer LCD Monitor is a high-resolution display device that allows users to view video and visual information from electronic devices. It features a built-in KVM switch, AMD FreeSync Premium technology, and multiple connectivity options such as HDMI, DP, and USB Type-C ports. The monitor also has external controls for power, function selection, and input selection. It complies with EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, RoHS Directive 2011/65/EU, and Directive 2009/125/EC for energy-related products.

Product Usage Instructions

Cleaning the LCD Monitor Screen:
To clean the LCD monitor screen, please follow these steps:
- Use a soft, lint-free cloth to gently wipe the screen surface.
- Avoid using any liquid or chemical cleaners as they may damage the screen.
Attaching the Monitor to the Base:
To attach the monitor to the base, please follow these steps:
Remove the monitor from the packaging.
Attach the foot stand to the base (for selected models).
Turn clockwise to lock and ensure that the base is locked onto the stand (for selected models).
Secure the base to the stand by turning the screw using the integrated tab or a suitable coin (for selected models).
Connecting Your Monitor to a Computer:
To connect your monitor to a computer, please follow these steps:
Turn off your computer and unplug its power cord.
Connect the signal cable to the desired port on the monitor (DP, HDMI1, HDMI2, or USB Type C DP).
Note: Audio output is only available on specific models. Please refer to the user manual for more information.
Using the External Controls: The monitor has external controls for various functions. Here is a brief explanation of each control:
- Power button: Press this button to turn the monitor on/off. Blue indicates power on, and amber indicates standby/power saving mode/OSD locked.
- Function key 1: Press to view the main page. Press again to enter the hotkey1 function. When the Function Menu is active, press this key to view basic information for your monitor and current input or reset custom color settings to factory defaults.
- Function key 2: Press to view the main page. Press again to enter the hotkey2 function. When the Function Menu is active, press this button to select scenario mode or game mode.
- Function key 3: Press to view the main page. Press again to enter the input select function. When the Function Menu is active, this button will quit the OSD.
- Function key 4: Press to view the main page. Press again to enter the next function in the Function Menu.
Note: The single toggle button on the backside of the display bezel operates like a joystick. Use it to move the cursor in four directions and press the button to select desired options. Red indicates operable, and dark gray indicates inoperable.

Important safety instructions

Please read the following instructions carefully.

To clean the LCD monitor screen:
- Turn off the LCD monitor and unplug the power cord.
- Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
- Monitor-to-PC signal cable is frayed or damaged.
- Liquid spills onto the LCD monitor or the monitor is exposed to rain.
- The LCD monitor or case is damaged.

Attaching the monitor to the base

Remove the monitor from the packaging.
Attach the foot stand to the base. (for selected models).
Turn clockwise to lock. Ensure that the base is locked onto the stand. (for selected models)
Secure the base to the stand by turning the screw using the integrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

Turn off your computer and unplug your computer’s power cord.
Connect the signal cable to the DP (optional) and/or HDMI (optional) input socket of the monitor, and the DP(optional) and/or HDMI (optional) output socket of the graphics card on the computer.
USB Type C Cable (Optional, USB Type C input models only) Connect one end of the USB Type C cable (optional) to your computer and connect the other end to your electric devices.
Connect the USB Cable(Optional) Connect the USB cable to the port for a fast charge. Connect the USB cable to the port.
Insert the monitor power cable into the power port at the back of the monitor.
Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
Connecting HDMI/DP+USB-B to computer 1 and USB-C to computer 2 when Controlling up to 2 computers from a single set of keyboard and mouse connected to the monitor.

Note: Audio output is only for audio output models. Please check the user manual for more instructions. Transmitting the 4K 160Hz signal via one HDMI 2.1/ DP 1.4/Type-C port requires DSC (Display Stream Compression) functionality. If your computer USB-C does not have DP-Alt, pls connect HDMI/ DP+USB-B to computer 1 and HDMI/DP+USB-C to computer 2.
AMD FreeSync Premium: It can allow an AMD FreeSync Premium-supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficiency, virtually stutter-free, and low- latency display update.
KVM switch(USB Port Select): The built-in KVM switch allows you to control up to 2 computers from a single set of keyboard and mouse connected to the monitor.

1
2
3
4
5

External controls

Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices. Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.
Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product. In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users CAN ICES-003(B)/ NMB-003(B)
Disposal of waste equipment by users in private households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

SPECIFICATION

LCD Panel

| Driving system| TFT Color LCD
---|---|---
Size| 27″W (69cm)
Pixel pitch| 0.155mm(H) x 0.155mm(V)
Brightness| Native: 400nit

HDR600 Mode : Peak 600nit

Contrast| 100,000,000:1Max. (ACM)
Viewable angle| 178° (H) 178° (V) (CR=10)
Response time| 1ms (G to G)

0.5ms (G to G, Min.)

Power consumption

| ON Mode| 31W
Standby mode| 0.5W
Off Mode| 0.3W

Input Connector

| DP (Only DP Model)(Optional) HDMI (Only HDMI Model)

USB Type C (Only USB Type C model)

USB Hub / USB3.0 x 4 (Only USB Hub Model)

Input Video Signal

| DP (Only DP Model)(Optional)

HDMI signal (Only HDMI-Input Model) USB Type C (Only USB Type C model)

Speakers| 2W x 2
Audio| Audio-Output (Only Audio-Output Model)
Maximum Screen Size| Horizontal:597mm Vertical:336mm
Power Source| 100-240V~, 50/60Hz
Environmental Considerations| Operating Temp: 0° to 40°C Storage Temp: -20° to 60°C Operating Humidity: 20% to 80%
Dimensions| 614.4(W) x 400.9~520.9(H) x 233.7 (D)mm
Weight (N. W.)| 5.44kg Unit (net)

Mechanism spec

| Tilt: -5°~ 25°

Swivel: 360°

Height adjustment: 120mm Pivot:Yes

Detachable foot stand: Yes

External Controls:

| ****

Functions

| Brightness Ultra-Low Latency

Contrast Advanced Black Boost

Black Boost Aim Point

Low Blue Light Language