AG STORE AG210 Electric Shaver Instruction Manual
- June 12, 2024
- AG STORE
Table of Contents
AG210
Operation Manual
AG210 Electric Shaver
INSTRUCTION MANUAL
Thanks for purchasing the AG210 electric shaver.
Please read this booklet carefully before using the shaver.
GENERAL DESCRIPTION (FIG. 1)
A. Protection cap for shaving unit
B. Click-on shaving unit
C. On/off button
D. Battery charge percentage
E. Charge symbol
F. Travel lock symbol
G. Cleaning reminder
H. Socket for small plug
I. Cleaning brush
J. USB line
K. Pouch
L. Clip-in trimmer accessories
CHARGING
Shaver should be charged under the circumstance of temperature between 5°C
-35°C
Please don’t charge it in the sun or beside a warmer .(Fig. 3)
The suitable voltage for the appliance charger is 100V-240V— 50Hz/60Hz
Do not charge the appliance for more than 10 hours.
Charging takes approx 2 hours.
When the appliance is fully charged, it has an operating time of 2 hours.
AC CHARGING
- Please make sure that the power is off before charging.
- Connect the USB interfaces of shaver and charge by data line, then plug into mains to recharge.(fig.4) It is recommended to use 5V charging equipment to charge this product.
USB CHARGING
- Please make sure that the power is off before charging
- Connect the USB charging line to the USB interface and the computer USB interface to charge.(fig.5) After charging, Please take good care of the Adapter for spare use.
Once the power cord is damaged. It must be replaced from the manufacturer or
after-service center.
Optimizing the lifetime of the rechargeable batteries.
Do not charge the shaver until it is completely empty. Then fully charge it
before you want to use it.
THE DISPLAY: SYMBOLS
- When the appliance is charging, the battery charge percentage and the battery symbol goes on to indicate that the appliance is charging. (Fig. 4)
- The remaining battery capacity is indicated by the battery charge percentage shown on the display.
- When the battery is fully charged, the battery charge percentage lights indicated shown 100.
- When the battery is almost empty, The battery symbol starts to flash.(Fig. 6)
CLEANING REMINDER
Cleaning the shaver unit
Turn off the shaver when start cleaning.
Regular cleaning guarantees optimal shaving performance.
CLEANING FOR THE SHAVING UNIT:
- Press the release button to open the inner blade when wash the hair chamber and the inner blade .(Fig. 14)
- When you need to clean the shaver after using. please wash shaving heads and the hair chamber with hot water(40-60°C). (Fig. 15)
Avoid damaging the shaving heads. please do not dry the shaving heads with the
towel or tissue. Do not clean the shaver when it is charging.
You can clean them while washing the shaver heads and hair chamber by using
the brush. Clean the shaving heads with cleaning brush after using 5 Press the
release button to open the shaving unit when clean the blade.
You can also clean the shaving heads with a degreasing liquid (e.g. Alcohol)
when needed. if you do. lubricate the shaving heads with a drop of sewing
machine oil after cleaning. This prevents wear of the shaving heads.(Fig. 16)
REPLACE SHAVING HEAD
When should you replace your shaving head? This depends on the intensity of
use.
Replace the shaving head at most every two years for optimal shaving
performance.
Do you notice that the blades are getting dull? Then it is useful to replace
it before you damage your skin. This shaving head can be reordered. Please
visit our website: www.agstore.nl or contact us at
customerservice@agstore.nl.
REPLACEMENT SHAVER:
- Pull the shaving head straight off the appliance
- Press the release button and open the shaving head.(Fig. 14)
- Remove the three shaving heads/blades from the shaving head holder and throw them away. (Fig. 17 18).
- Place 3 new shaving heads in the holder. Secure the shaving heads to the appliance by tightening the knob. (Fig. 19 20)
Note: Make sure that the notches on both sides of the shaving heads fit exactly on the projections in the shaving head holder.
DISPOSING OF THE BATTERY
The battery used in this shaver contains material that will pollute the
environment. If you need to dispose the shaver. Please dismantle the battery
and turn it to the government designated collection places.
Before dismantling the battery you must be sure that turn off the power of
appliance without remaining electricity. If there is remaining electricity.
turn on the shaver until the motor stops.
© AG Store
Bovendijk 203
3045PD, Rotterdam
The Netherlands
www.agstore.nl
customerservice@agstore.nl
Designed in The Netherlands
Made in China
Documents / Resources
| AG
STORE AG210 Electric
Shaver
[pdf] Instruction Manual
AG210, AG210 Electric Shaver, Electric Shaver, Shaver
---|---