MCG Innovations CR1220 Wireless Remote Shutter Camera Controller User Guide
- June 12, 2024
- MCG Innovations
Table of Contents
MCG Innovations CR1220 Wireless Remote Shutter Camera Controller
Product Information
The product is a wireless remote shutter and phone stand all-in-one device. It features a ring button that is installed on the back of the phone. The device allows for convenient picture-taking by simply pressing the camera button with your index finger, eliminating the need to use the touch camera on the screen. It also functions as a ring buckle and serves as a helpful accessory for entertainment.
Product Usage Instructions
- Tear off the protective film from the device.
- Place the protective film on the back of your phone.
- Remove the release paper from the protective film.
- Stick the device onto the protective film.
In The Box:
- Wireless remote shutter x 1
- User guide x 1
- CR1220 x 1
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Product Description
Shutter button & Phone Stand
wireless remote shutter & phone stand all – in- 1.
Bluetooth User Instructions
- Turn on the unit by pressing the power button.
- The first time you use it with your smart phone or tablet Bluetooth® scan mode will be activated. To pair, follow the instructions below.
- Activate the Bluetooth® feature on your device, then pair it manually if it doesn’t connect automatically.
- Look for INSR14 on the list and pair.
- Once paired, it will always stay connected to that device as long as both are turned on and Bluetooth® is enabled.
Product User Instructions
- The ring button is installed on the back of the phone. When taking pictures, you only need to press the camera button with your index finger, which is more convenient than the traditional touch camera on the screen. You can take pictures whenever and wherever you want!
- It is not only a ring buckle, but also a good helper for your entertainment.”
Installation procedure
- Tear the protective film
- Place the protective film on the back of the phone
- Tear off the release paper
- Paste the machine in the protective film
Specifications
- Bluetooth® Wireless Technology
- 5V1A Power
- CR1220 Cell Battery
In The Box
- Wireless remote shutter x 1
- User guide x 1
- CR1220 x 1
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>