Enail 710 Coils Clip Kit User Guide

June 12, 2024
Enail

710 Coils Enail kit
Care & Setup Guide

710 Coils Clip Kit

Congrats on scoring the 710 Coils Enail kit. We want to make sure you have the best experience possible. Below is info on how to attach the clips and how to find your ideal temp range
Setup: Attaching the clip
Your kit comes with one standard clip in the coil bag and a set of 5 assorted sizes in a separate bag. You can use the single clip or select a size you. The clip just needs to be snug and does not need to be super tight, since the friction will keep it in place

  1. Take the coil and banger and put the banger inside the coil, make sure the coil arm is on the right side of the banger neck and should match the below pictures
  2. Take the clip you chose and attach it to the coil arm, make sure the clip is facing the same as the first picture below (Picture 2)
  3. Flip the clip over the neck of the banger and attach to the coil arm. You can also cross the hooks to give a snugger fit (Picture 4)

Enail 710 Coils Clip Kit

How to find your ideal temp range

When you first turn the controller on it will be set to 420 degrees Fahrenheit.
This the temp you will initially work from
Start out taking small dabs and follow the below
If it’s hot on the back of your throat : Lower the temp 10 or more degrees depending on how hot it was and once the temp  has adjusted. Try another dab. You will continue to do this until you start to get flavor and no throat irritation. Once you are at this point, you will do smaller temp adjustments until you feel you have hit your ideal temp. You will know as it will have no throat irritation and lots of vapor along with flavor
If it’s wispy and not producing much vapor: Raise the temp 10 or more degrees depending on how wispy it was and once the temp has adjusted. Try another dab. You will continue to do this until you start to get flavor with no throat irritation. Once you are at this point, you will do smaller temp adjustments until you feel you have hit your ideal temp. You will know as it will have no throat irritation and lots of vapor along with flavor
Once you have found the above you are now ready to dab as big as you like and you should only mess with the coil and banger when they are completely cooled down.
Here are some things you can add to your kit
Extra bangers, it’s always good to have a few spare bangers More clips, you never can have enough =)
Different size coils, our coils come in 25 and 30mm standard and deep dish Pearls and inserts, Pearls can help spread your dab out to help with vaporization Inserts are great for keeping your banger clean and are super easy to clean. Just drop them in ISO after use
Ball cap or spinner cap, if you want your pearls to spin. You will need a spinner cap

We truly hope you enjoy your new gear! Please do not hesitate to hit us up with any questions.
Instagram: @710Coils • Email: CS@710coils.com
The 710 Coils Team

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals