SEAHORSE 1231F Large Rolling Watertight Tool Case Installation Guide
- June 12, 2024
- SEAHORSE
Table of Contents
SEAHORSE 1231F Large Rolling Watertight Tool Case
Product Information
The product is a wheel hub with dimensions of 28.61 inches internal and 11.10 inches at the top bosses. The product has a 1.97-inch wall and a label area of 3.5 x 2.0 inches. It also features a pull handle with a length of 1.11 inches and four stainless steel padlock protectors. The product has a latch with an optional metal lock and can accommodate dimensions of up to 28.6 x 17.7 x 6.6 inches (top of handle cradle).
Product Usage Instructions
- Ensure that the product is installed securely using 1/4 and #10 self-tapping screws at the bottom and top bosses respectively.
- To open the product, pull the handle which extends up to 9.30 inches.
- The product has four wheels with ball bearings for easy mobility.
- If desired, the product can be fitted with an optional latch with a metal lock by specifying p/n 1231ML.
Note that the dimensions to the bottom of the panel flange should be considered when determining the usable interior space of the product.
DIMENSIONS
NOTES
- Max. usable inside dimensions are 28.6″ X 17.7″ X 6.6″ (top of handle cradle)dim. are approx.
- Bosses @ bottom use a 1/4 and # 10 @ top self-tapping screws.
- Dimensions to bottom of panel flange.
- Optional latches with Metal LockSpecify p/n 1231ML.
2009 Wright Ave. La Verne CA 91750. Ph. 626-339-6673 Fx. 626-331-8584 www.seahorse.net.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>