HOLL S Venitian Hybrid Sauna Instruction Manual
- October 30, 2023
- HOLL S
Table of Contents
- HOLL S Venitian Hybrid Sauna
- Product Information
- Product Usage Instructions
- Safety Instructions
- Description sauna
- Installation Instructions
- Assembly Instructions
- USING THE SAUNA
- Operating instructions
- MAINTENANCE
- SERVICING & WARRANTY
- Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HOLL S Venitian Hybrid Sauna
Product Information
The Venetian Hybrid Sauna is a high-quality indoor sauna designed for relaxation and health benefits. The sauna is made from sustainably sourced wood from managed forests and complies with all current European standards. The manufacturing process uses no heavy metals, making it an eco-friendly choice for your home. The sauna comes with a complete package of installation handbook, door handle, electric stove protective cage, steam sauna accessories pack including thermometer, hygrometer, hourglass, pail, ladle and light fitting. The sauna has six general features: Ceiling, Side or Rear, Front + Door, Seating, Seating support, and Floor. The stove technical guide provides additional information about the product.
Recommendations
Read this manual carefully before using your sauna for the first time. We recommend you keep it in a safe place for future reference.
- Install the sauna on a perfectly flat surface.
- The sauna must remain in a dry area. Do not use it near a source of water (bath, damp floor, swimming pool).
- Do not use liquid cleaning products. Disconnect the sauna before cleaning and use a wet rag (see Maintenance section).
- Protect the sauna’s electrical cable to avoid it being crushed or pinched.
- Prior to replacing certain components, ensure that they are specified by the manufacturer or that they have the same features as the original parts. Incorrect replacement can cause a fire, a short circuit or damage to the sauna. We strongly recommend using a qualified technician.
- To avoid the risk of burns or electric shocks, do not use any metal tools.
- Do not put animals in the sauna.
- Do not leave the sauna switched on without supervision.
- Do not leave the sauna switched on for more than 3 hours at a time to avoid premature deterioration of the equipment. After 3 hours continuous usage, switch off the sauna for at least one hour.
- We recommend that you do not install a locking system on the sauna door.
- Check compliance of your electrical installation prior to connecting your sauna to the power supply.
Product Usage Instructions
Before using the Venetian Hybrid Sauna for the first time, read the manual carefully. We recommend keeping it in a safe place for future reference. Safety is of utmost importance, so please adhere strictly to the safety instructions.
Safety Instructions
- Beware of hyperthermia, heat stroke or heat exhaustion which can be caused or aggravated by noncompliance with the safety instructions. Symptoms are fever, a rapid pulse, dizziness, fainting, lethargy and numbness in all or part of the body. The effects are: reduced awareness of the heat, ignorance of imminent risks, loss of consciousness.
- Dry your hands before connecting or disconnecting the electricity. Never work with wet hands or feet.
- Do not switch the electricity or the heating system rapidly on or off as this could damage the electrical system.
- Do not try to repair the sauna by yourself without the agreement of the sauna’s distributor or manufacturer. Unauthorized attempts to repair it will invalidate the manufacturer’s warranty.
- Do not use any type of detergent inside the sauna.
- Do not pile up or store objects inside or on top of the sauna.
- Do not place flammable materials or chemical agents near the sauna.
IMPORTANT: Please read the safety instructions carefully before installing and using your sauna cabin. They are essential for your safety, so please adhere strictly to them. Beware of hyperthermia, heat stroke or heat exhaustion which can be caused or aggravated by noncompliance with the safety instructions. Symptoms are fever, a rapid pulse, dizziness, fainting, lethargy and numbness in all or part of the body. The effects are: reduced awareness of the heat, ignorance of imminent risks, loss of consciousness.
The sauna must not be used by:
- Children under 6 years of age.
- People with severe reactions to sunlight.
- Elderly or disabled people.
- People with previous medical conditions such as heart disease, high or low blood pressure, blood circulation problems or diabetes without prior medical advice.
- Pregnant women. Excessive temperature can endanger the foetus.
- Persons suffering from dehydration, open sores, eye disorders, burns or sunstroke.
Children between 6 and 16 years of age may use the sauna provided that they are continuously supervised by a responsible adult and that the temperature does not exceed 60°C (140°F). In the event of problems involving health, medication or injury to muscles or ligaments, do not use the sauna without previously consulting a doctor and obtaining approval. If surgical implants are worn, do not use the sauna without previously consulting a doctor and obtaining his approval. Do not use the sauna after strenuous activity. Wait 30 minutes for your body to cool down. Do not spend more than 40 minutes in the sauna at any one time. Do not consume alcohol or drugs before or during the session. Do not sleep in the sauna when it is in operation. To avoid the risk of overheating, connect your sauna to a sufficiently powerful electrical outlet and do not connect other electrical equipment to the same wall socket.
To avoid any risk of electrocution or damage to the sauna, do not use it:
- During thunderstorms.
- If the electrical cable is damaged, it must be replaced by a qualified person.
- If the electrical cable overheats, it must be checked by a qualified person.
- If you have to change a bulb, wait until the sauna is switched off and cooled down.
- Dry your hands before connecting or disconnecting the electricity.
- Never work with wet hands or feet.
- Do not switch the electricity or the heating system rapidly on or off as this could damage the electrical system.
- Do not try to repair the sauna by yourself without the agreement of the sauna’s distributor or manufacturer.
- Unauthorized attempts to repair it will invalidate the manufacturer’s warranty.
- Do not use any type of detergent inside the sauna.
- Do not pile up or store objects inside or on top of the sauna.
- Do not place flammable materials or chemical agents near the sauna.
Description sauna
General features
- Cabin made from Canadian spruce
- Interior light fittings
- Thermometer / Hygrometer
- Hourglass
- Wooden pail and ladle
- Ventilation grille
- 2 years electronic warranty, 10 years wood warranty
Package contents
General:
- 1x installation handbook
- 1x door handle (interior and exterior component)
- 1x electric stove protective cage
- 1x steam sauna accessories pack
- (including thermometer, hygrometer, hourglass, pail, ladle and light fitting)
Specific:
A. Ceiling
B. Side or Rear
C. Front + Door
D. Seating
E. Seating support
F. Floor
Installation Instructions
The Venetian Hybrid Sauna is designed solely for interior installation. Please read the assembly instructions carefully before starting. Read the assembly instructions carefully before starting.
Choice of location
Holl’s saunas are designed solely for interior installation.
Select a space:
- Inside, in a dry area, on a flat stable surface that can support the weight of your sauna.
- The height must be sufficient for you to reach the ceiling and carry out electrical connections and maintenance.
- Away from any source of water, flames or flammable materials.
Practical advice
- Note that sauna assembly requires 2 or 3 adults.
- Clearly identify each panel before you begin
- During assembly, position your sauna’s mains cable so that it is easily accessible.
- Note that there are variations between the models.
IMPORTANT : Please check the countersink and hole diameter of the drill holes to avoird damaging the wood. The minimum room height required for installation is 2020 mm.
Assembly Instructions
Step 1: Position the flooring on the ground at the location where you
wish to install the sauna. The front part of the panel can be recognised by
the absence of an electrical connector.
Step 2: Install the rear panel in the groove in the flooring.
Step 3: Position the left side panel in the groove in the flooring,
ensuring that it slots perfectly into the rear panel. Finish the assembly of
two side panels by locking buckles.
Finish the assembly of two side panels by locking buckles.
Step 4: Position the right side panel in the groove in the flooring,
ensuring that it slots perfectly into the rear panel as well as the bench.
Finish the assembly of two side panels by locking buckles.
Finish the assembly of two side panels by locking buckles.
Step 5: Position the lower part of the bench, ensuring that it slots
perfectly into the flooring as well as the side panels. The heating panels
must be aligned towards the door. Connect the electrical plugs located behind
the bench. Finally, position the upper part of the bench, ensuring that it
rests securely on the horizontal guides fixed to the rear and side panel.
Enjoy your Venetian Hybrid Sauna for a relaxing and rejuvenating experience!
Step 6: Carefully position the front panel, ensuring that it fits
perfectly with the side panels.
Important : Keep the door closed while handling this component.
Finish the assembly of three side panels by locking buckles.
Step 7: After moving the cables outside the cabin, carefully position the ceiling over the cabin so as not to damage the temperature sensor.
Pass the cables into the ceiling via the openings provided.
Step 8: Connect the cables to the control box in accordance with their coding (Cable A. Load A, Cable B. Load B, etc.). The remaining cables must be connected in accordance with the number of pins on each connector. Once the connections are complete, position the protective plywood sheet on the ceiling.* Some cables do not connect to anything depending on the options available in your cabin.
Step 9:
On the outside of the door, position the handle in line with the holes provided.
Insert the screws through the inside of the door and fix the handle. The metal
part must be on the outside of the cabin. (depending on model) After checking
that the sauna is working correctly, we recommend that you screw the ceiling’s
plywood sheet tight to the upper panel. As the sauna can reach very high
temperatures, this part can often exhibit variations in shape, especially at
the corners.
Important : The screws must be removed if you need to carry out
maintenance.
Step 10 (option)
Plug the ionizer and screw it to his place. Press ION to prevent diseases of ventilation. Press O3 for disinfection with ozone.
Step 10:
The stove’s protective cage must be assembled then installed inside the cabin.
Step 11:
Install the stove in its cage. All instructions for the stove’s installation
and electrical connection are enclosed in its shipping carton.
Note: For stove installation, please refer to the stove manual.
USING THE SAUNA
Control panel
Connect the power supply unit to the wall outlet, the LED indicator will flash on the display. It is now possible to turn on the infrared emitters, the lights and the music.
-
Start
Press power to turn on the sauna, the indications ‘-’ ‘‘ – ’will appear and the light will come on. Press to start preheating -
Temperature settings
Once the sauna is on:
press +/- on the left side of the control panel to set the temperature between 35 ° C to 65 ° C, 1 press = 1 ° C. The screen displays the programmed temperature for 10 seconds and then displays the sauna room temperature again.
Note: The maximum air temperature achievable in the cabin may be lower than the desired temperature. It depends on the temperature outside the cabin. Default temperature = last programmed temperature.
Timer settings
Press the +/- buttons to select the duration of use, from 5 min to 60 min. 1 press = 1min. If the time display panel displays – -, the panels remain on, when the timer indicates less than 1 minute, an alarm will sound, once the timer reaches 00, the panels will automatically turn off.
Quick ignition:
Operating instructions
Review the medical contraindications and safety instructions. Consult your doctor if you have any doubts concerning the possible use of your infrared sauna. If you start to feel ill during your session, leave your sauna immediately.
-
Adjust your sauna’s temperature to between 40 and 50°C.
-
The sauna preheats within 15 to 25 minutes. We recommend that you add this preheating time to the duration time of your session.
Example : for a 30 minute session, programme 45 minutes and re-enter the cabin once the sauna is hot. Enjoy the heating time for a shower or bath before the session and be sure to dry yourself. -
Make use of the pre-heating time to have a shower or warm bath before the session.
-
When the required temperature is reached, the heating equipment will go on stand-by so as to maintain a constant temperature.
-
Drink water before, during and after the session. This will help compensate for the loss of water through sweating.
-
To absorb perspiration and keep your sauna dry, it is advisable to place a towel on the bench and one on the cabin floor. Keep a third towel close at hand to remove excess perspiration.
-
Sweating will begin between 6 and 15 minutes after the session starts. We recommend you do not exceed 30 minutes in the sauna and dry you regularly to avoid wetting the issuers, as well as damaging the wood prematurely.
-
You can open the door at any time to introduce fresh air during your session. Infrared heating’s unique property is to directly heat the body without heating the ambient air. This allows you to enjoy a session with the door ajar without minimising its effects.
-
After the session, you can allow your body to perspire further by remaining in the switched-off sauna with the door open prior to having a warm shower to get rid of toxins.
Tips
- For beautiful hair, you can cover it with oil (jojoba, for example) or a care product, and wrap it in a towel. When the session is over, wash it with a very gentle shampoo.
- To soothe away your aches and pains, massage the painful areas during the session.
- Take advantage of this thermal bath to gently stretch your muscles.
- At the first signs of cold weather, increase the frequency of your sessions to activate your immune system.
MAINTENANCE
IMPORTANT : Disconnect the cabin’s power supply cable before undertaking any work.
Problems identified | Possible reasons | Solutions |
---|
No indicator light displayed on the control panel.
| Power supply cable disconnected| Check power supply cable connection
The general power supply is cut| Check that the switchboard and wall plug are
working
Fault in power supply unit| Contact your dealer
One or more infrared panels do not heat up
| The infrared panel’s cable is disconnected| Check cable connections
One of the infrared panels is defective| Replace the infrared panel with an
original component supplied by the manufacturer
Possible reversal of the connections of the power supply box| Intervert the
LoadA and LoadB cables
Sauna gives off a smell| Temperature of the panels or their cables is too
high| Switch off power supply and contact your dealer
Sauna light fittings no longer work
| Bulb not fully engaged| Check bulb holder and replace if necessary
Bulb is defective| Replace bulb
Electrical panel is defective.| Contact your dealer
A speaker is not working
| Speaker cable disconnected| Reconnect the cable
Speaker defective| Contact your dealer
MP3 player not working
| Power supply cable disconnected| Reconnect power supply cable
MP3 player not switched on| Check the 12V DC power supply cable and replace if
required
The USB key is not recognized| Check the format of audio or format the USB key
files.
A beep sounded| Temperature sensor is incorrectly connected or defective|
Reconnect the cable or replace the sensor
One or more keys on the control panel do not work
| Control panel wire pinched or defective| Check the board connection mat and
its passage in the sauna
Defective board| Contact your reseller
Does not rise or little tempera- ture
| Ambient temperature too low| Make sure the room that houses the sauna is at
least 15 ° C
Infrared panel contains or defective| Identify the panel (s) that do not heat
up and contact your dealer
SERVICING & WARRANTY
Servicing
- Disconnect your sauna.
- Use a vacuum cleaner to remove dust from crevices in the woodwork.
- Clean the cabin with a damp cotton cloth and use a small amount of soap if necessary. Rinse with a damp cloth.
- Wipe with a dry cloth.
IMPORTANT
Do not use benzene, alcohol, chemical agents or strong detergents on the sauna
since chemical products can damage the wood and its protective coating. Do not
spray water on your sauna.
Practical advice:
To extend the life of your sauna, we recommend that you apply linseed oil to the benches, back rests and flooring of your cabin with a lint-free cloth. If your sauna’s flooring or bench are indelibly marked (For example: sweating), rub them lightly with sandpaper.
Warranty
All the components of France-Sauna saunas are guaranteed for 2 years and wood
4 years. The warranty comes into force on the date of dispatch (corresponding
to the date the invoice is issued).
The warranty does not apply in the following cases:
- Malfunction or damage arising from installation, usage or repair that are not in compliance with the safety instructions.
- Malfunction or damage arising from conditions that are unsuitable for the equipment’s originally intended purpose.
- Damage arising from negligence, accident or force majeure (thunderstorm or bad weather, flood, water damage).
- Malfunction or damage arising from the use of non-authorised accessories.
- Malfunction or damage resulting from poor maintenance of the sauna, sweating on the wood.
- Degradation linked to pests attacking wood, within a period of more than 6 months from the date of delivery.
- Degradation due to abnormal humidity, or excess water in the cabin.
- Malfunction or damage to the door, the result of which is independent of transport. The warranty does not cover the costs linked to returning the cabin or part of its components to our workshops of. Under the warranty, in the event of a breakdown, the items deemed defective by our technicians will be exchanged. Information and explanations required for their installation will be provided by one of our technicians. Costs linked to the use of subcontract labour provided by a third party cannot be covered by France-Sauna.
Maintenance & servicing
Maintenance
IMPORTANT:
Disconnect the cabin’s power supply cable before undertaking any work.
Problems identified | Possible reasons | Solutions |
---|
Electric stove does not heat up.
| Power supply cable disconnected.| Check power supply cable connection.
The general power supply is cut.| Check that the switchboard and wall plug are
working.
Stove is overheat protected.| Refer to the electric stove manual.
Sauna light fitting no longer work.
| LED cable not fully plug.| Plug the cable.
LED is defective.| Contact your dealer.
LED doesn’t respond.| Contact your dealer.
Servicing
- Disconnect your sauna.
- Use a vacuum cleaner to remove dust from crevices in the woodwork.
- Clean the cabin with a damp cotton cloth and use a small amount of soap if necessary. Rinse with a damp cloth.
- Clean the glass with a window / glass cleaner and a soft colth.
IMPORTANT: Do not use benzene, alcohol, chemical agents or strong detergents on the sauna since chemical products can damage the wood. Do not spray water on your sauna.
Warranty
All the components of Holl’s saunas are guaranteed for 2 years. The warranty comes into force on the date of dispatch (corresponding to the date the invoice is issued).
The warranty does not apply in the following cases:
- Malfunction or damage arising from installation, usage or repair that are not in compliance with the safety instructions.
- Malfunction or damage arising from conditions that are unsuitable for the equipment’s originally intended purpose.
- Damage arising from negligence, accident or force majeure (thunderstorm or bad weather).
- Malfunction or damage arising from the use of non-authorised accessories.
The warranty does not cover the costs linked to returning the cabin or part of its components to our workshops of. Under the warranty, in the event of a breakdown, the items deemed defective by our technicians will be exchanged. Information and explanations required for their installation will be provided by one of our technicians. Costs linked to the use of subcontract labour provided by a third party cannot be covered by Holl’s.
IMPORTANT: Do not return the product to the store Contact your local after sales service on www.holls.fr or POOLSTAR FRANCE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>